1.     Lin, Y. K. and Wu, W. F., 1984, “Application of Cumulant Closure to Random Vibration Problems,” in Random Vibrations, ASME publication, ed. T. C. Huang and P. D. Spanos, AMD-Vol. 65, pp. 113-125. (EI)

     2.     Lin, Y. K. and Wu, W. F., 1984, “A Closed-Form Earthquake Response Analysis of Multi-Story Building on Compliant Soil,” Mechanics of Structures and Machines, originally Journal of Structural Mechanics, Vol. 12, pp.87-110. (EI, SCI)

     3.     Lin, Y. K. and Wu, W. F., 1984, “Along-Wind Motion of Building on Compliant Soil,” Journal of Engineering Mechanics, ASCE, Vol. 110, No. 1, pp.1-19. (EI, SCI)

     4.     Wu, W. F. and Lin, Y. K., 1984, “Cumulant-Neglect Closure for Nonlinear Oscillator under Random Parametric and External Excitations,” International Journal of Nonlinear Mechanics, Vol.19, No. 4, pp. 349-362. (EI, SCI)

     5.     Lin, Y. K., Wu, W. F. and Yang, J. N., 1985, “Stochastic Modeling of Fatigue Crack Propagation,” in Probabilistic Methods in Mechanics of Solids and Structures, ed. S. Eggwertz and N. C. Lind, Springer-Verlag, Berlin, pp. 103-110.

     6.     Wu, W. F., 1986, “On the Markov Approximation of Fatigue Crack Growth,” Journal of Probabilistic Engineering Mechanics, Vol. 1, No. 4, pp. 224-233. (EI)

     7.     Shinozuka, M., Deodatis, G. and Wu, W. F., 1987, “Nonlinear Dynamic Response and System Stochasticity,” in Nonlinear Stochastic Dynamical Engineering Systems, ed. F. Ziegler and G. I. Schueller, Springer-Verlag, Berlin, Germany, pp. 814-827.

     8.     Wu, W. F., 1987, “Comparison of Gaussian Closure Technique and Equivalent Linearization Method,” Journal of Probabilistic Engineering Mechanics, Vol. 2, No. 1, pp. 2-8. (EI)

     9.     Wu, W .F., 1989, “Extreme and First Excursion Probability,” Journal of the Chinese Institute of Engineers, Vol. 12, No. 4, pp. 519-528. (EI)

   10.   Wu, W. F., 1990, “Random Crack Propagation and Probabilistic Durability,” Journal of the Chinese Society of Mechanical Engineers, Vol. 11, No. 1, pp. 29-38. (EI)

   11.   Wu, W. F. and Huang, T. H., 1990, “Solution of the Fokker-Planck-Kolmogorov Equation in Stochastic Modeling of Fatigue Crack Propagation,” Journal of the Chinese Institute of Engineers, Vol. 13, No. 1, pp. 25-34. (EI)

   12.   Wu, W. F., 1990, “Comments on an Ito-Based General Approximation Method for Random Vibration of Hysteretic Systems, Part I: Gaussian Analysis,” Journal of Sound and Vibration, Vol. 136, No. 3, pp. 507-508. (EI, SCI)

   13.   Wu, W. F., 1990, “Nonstationary Random Vibration of a Duffing Oscillator,” Chinese Journal of Mechanics, Vol. 6, No. 1, pp. 1-8.

   14.   Wu, W. F., 1990, “A Stochastic-Mechanical Model for Mammalian Long Bone Growth,” International Journal of Mathematical and Computer Modelling, Vol. 14, pp. 662-667.

   15.   Wu, W. F., 1990, “Reliability Analysis of Fatigue Crack Propagation under Constant Amplitude Loading,” Journal of the Chinese Society of Mechanical Engineers, Vol. 11, No. 4, pp. 308-317. (EI)

   16.   Moss-Salentijn, L., Kember, N. F., Shinozuka, M, Wu, W. F. and Bose, A., 1991, “Computer Simulations of Chondrocytic Clone Behavior in Rabbit Growth Plates,” Journal of Anatomy, Vol. 175, No. 1, pp. 7-17. (SCI)

   17.   Wu, W. F. and Huang, T. H., 1991, “A Statistical Nonlinear Cumulative Damage Rule and Fatigue Life Prediction under Random Loading,” International Journal of Pressure Vessels and Piping, Vol. 47, No. 1, pp. 1-16. (EI, SCI)

   18.   Wu, W. F., 1991, “Comparison of Some Probabilistic Models in the Durability Analysis of Fatigue Crack Growth,” in Mechanical Behaviour of Materials, ed. M. Jono and T. Inoue, Pergamon Press, pp. 571-576. (EI)

   19.   Choi, S. T. and Wu, W. F., 1991, “Extreme Peak Distribution and Its Applications in Stochastic Structural Dynamics Problems,” in Stochastic Structural Dynamics - New Practical Applications, ed. I. Elishakoff and Y.K. Lin, Springer-Verlag, Berlin, pp. 17-32. (EI)

   20.   Wu, W. F., 1991, “On the Solution of a Nonhomogeneous Pure Birth Process with Immigration,” Bulletin of the College of Engineering, National Taiwan University, No. 53, pp. 1-8.

   21.   Wu, W. F., Chang, S.T. and Cheng, H. C., 1992, “Application of Nondestructive Evaluation to the Analysis of Structural Safety and Reliability,” Journal of Nondestructive Testing, Vol. 10, No. 5, pp. 5-20.

   22.   Syau, J. J. and Wu, W. F., 1992, “Reliability Analysis of Structural Components Through Nondestructive Inspection,” Journal of Nondestructive Testing, Vol. 10, No. 5, pp. 21-30.

   23.   Wu, W. F. and Huang, T. H., 1993, “Prediction of Fatigue Damage and Fatigue Life under Random Loading,” International Journal of Pressure Vessels and Piping, Vol. 53, No. 2, pp. 273-298. (EI, SCI)

   24.   Wu, W. F., 1993, “Computer Simulation and Reliability Analysis of Fatigue Crack Propagation under Random Loading,” Engineering Fracture Mechanics, Vol. 45, No. 5, pp. 697-712. (EI, SCI)

   25.   Wu, W. F., Shin, C. S. and Tsai, C. H., 1994, “A Reliability Assessment of Reactor Pressure Vessels,” International Journal of Pressure Vessels and Piping, Vol. 57, No. 1, pp. 77-84. (EI, SCI)

   26.   Wu, W. F. and Syau, J. J., 1994, “Study of the Nondestructive Inspection Frequency Based on Structural Reliability Considerations,” NDT & E International, Vol. 26, No. 5, pp. 249-254. (Supported by NSC 79-0401-E002-28). (EI, SCI)

   27.   Wu, W. F., Shin, C. S. and Shen, J. J., 1994, “Probabilistic Analysis of Fatigue Crack Propagation Under Random Loading,” Journal of Pressure Vessel Technology, Transactions of the ASME, Vol. 116, No. 2, pp. 216-225. (Supported by NSC 79-0401-E002-28). (EI, SCI)

   28.   孫德宣、吳文方，1994，「隨機負荷下之疲勞裂紋成長模擬及可靠度分析」，中華民國力學學會期刊，第十卷，第一期，第 31-42 頁。

   29.   吳文方、單秋成、陳宗權、陳弘毅，1994，「隨機負荷下之疲勞裂縫延伸與疲勞可靠度分析」，中國航空太空學會學刊，第二十六卷，第二期，第173-181頁。

   30.   Tsai, C. H. and Wu, W. F., 1994, “On the Application of Probabilistic Fracture Mechanics to the Reliability and Inspection of Pressure Vessels,” International Journal of Pressure Vessels and Piping, Vol. 59, No. 3, pp. 323-333. (EI, SCI)

   31.   Wu, W. F. and Syau, J. J., 1995, “A Study of Risk-Based Non-Destructive In-Service Inspection,” Nuclear Engineering and Design, Vol. 158, pp. 409-415. (Supported by NSC 79-0401-E002-28). (EI, SCI)

   32.   Lee, Y. R. and Wu, W. F., 1995, “On the Profile Design of a Scroll Compressor,” International Journal of Refrigeration, Vol. 18, No. 5, pp. 308-317. (EI, SCI)

   33.   Wu, W. F., Lee, L. J. and Choi, S. T., 1996, “A Study of Fatigue Damage and Fatigue Life of Composite Laminates,” Journal of Composite Materials, Vol. 30, No. 1, pp. 123-137. (Supported by NSC 81-0401-E002-555). (EI, SCI)

   34.   Lee, Y. R. and Wu, W. F., 1996, “A Study of Planar Orbiting Mechanism and Its Applications to Scroll Fluid Machinery,” Mechanism and Machine Theory, Vol. 31, No. 5, pp. 705-716. (EI, SCI)

   35.   Wu, W. F., Liou, H. Y. and Tse, H. C., 1997, “Estimation of Fatigue Damage and Fatigue Life of Components under Random Loading,” International Journal of Pressure Vessels and Piping, Vol. 72, No. 3, pp. 243-249. (Supported by NSC 84-2212-E002-064). (EI, SCI)

   36.   鄭合志、張毓青、吳文方，1998，「以可靠度為核心之維護方針探討」，台大工程學刊，第七十二期，第17-32頁。(Supported by NSC 85-2212-E002-018).

   37.   Liou, H. Y., Wu, W. F. and Shin, C. S., 1999, “A Modified Model for the Estimation of Fatigue Life Derived from Random Vibration Theory,” Probabilistic Engineering Mechanics, Vol. 14, No. 3, pp.281-288. (Supported by NSC 84-2212-E002-064). (EI, SCI)

   38.   Lee, W. S., Ma, R. H., Wu, W. F., Chen, S. L. and Hsia, H. W., 1999, “Performance and Bearing Load Analysis of a Twin Screw Air Compressor,” Chinese Journal of Mechanics, Vol. 15, No. 2, pp. 69-78. (EI, SCI)

   39.   李文興、馬榮華、陳希立、吳文方，1999，「雙螺旋式壓縮機性能模擬與分析」，台大工程學刊，第七十七期，第85-100頁。

   40.   Wu, W. F., Cheng, H. C. and Kang, C. K., 2000, “Random Field Formulation of Composite Laminates,” Composite Structures, Vol. 49, No. 1, pp. 87-93. (Supported by NSC 85-2212-E002-037). (EI, SCI)

   41.   Wu, W. F., Ni, C. C. and Liou, H. Y., 2001, “Random Outcome and Stochastic Analysis of Some Fatigue Crack Growth Data,” Chinese Journal of Mechanics, Vol. 17, No. 2, pp. 61-68. (Supported by NSC 89-2212-E002-152). (EI, SCI)

   42.   Lee, W. S., Ma, R. H., Chen, S. L., Wu, W. F. and Hsia, H. W., 2001, “Numerical Simulation and Performance Analysis of Twin Screw Air Compressors,” International Journal of Rotating Machinery, Vol. 7, No. 1, pp.65-78. (EI)

   43.   Hsieh, J. J., Lee, W. S., Wu, W. F. and Chen, S. L., 2001, “Effect of Lubrication on the Performance and Dynamic Loads of Scroll Compressors,” Chinese Journal of Mechanics, Vol. 17, No. 4, pp. 201-210. (EI, SCI)

   44.   Liou, H. Y., Ni, C. C. and Wu, W. F., 2001, “Scatter and Statistical Analysis of Fatigue Crack Growth Data,” Journal of Chinese Society of Mechanical Engineers, Vol. 22, No. 5, pp. 399-407. (Supported by NSC 89-2212-E-002-152). (EI)

   45.   You, J. S. and Wu, W. F., 2002, “Probabilistic Failure Analysis of Nuclear Piping with Empirical Study of Taiwan’s BWR Plants,” International Journal of Pressure Vessels and Piping, Vol. 79, No. 7, pp. 483-492. (Supported by NSC 91-NU-7-002-002). (EI, SCI)

   46.   鄭合志、吳文方，2002，「複合材料疲勞壽命分佈之預測」，中州學報，第十五期，第335-341頁。

   47.   Wu, W. F., Tsai, C. H., Tu, K. C. and You, J. S., 2002, “Probabilistic Analysis of Core Shroud Cracks,” Nuclear Engineering and Design, Vol. 214, pp. 103-112. (EI, SCI)

   48.   Cheng, H. C. and Wu, W. F., 2002, “On the Relation between Static Strength and Fatigue Life Distributions of Composite Materials,” Journal of Chinese Society of Mechanical Engineers, Vol. 23, No. 3, pp. 203-211. (Supported by NSC 86-2212-E002-060). (EI)

   49.   游章雄、吳文方，2003，「以風險度為基準之電廠預防維護策略探討」，台大工程學刊，第八十七期，第15-27頁。

   50.   Wu, W. F. and Ni, C. C., 2003, “A Study of Stochastic Fatigue Crack Growth Modeling Through Experimental Data,” Probabilistic Engineering Mechanics, Vol. 18, No. 2, pp. 107-118. (Supported by NSC 89-2212-E-002-152). (EI, SCI)

The following items are within 5 years----------------------------------------------------------------------------------------------------------

   51.   Wu, W. F. and Ni, C. C., 2004, “Probabilistic Models of Fatigue Crack Propagation and Their Experimental Verification,” Probabilistic Engineering Mechanics, Vol. 19, No. 3, pp. 247-257. (Supported by NSC 91-2212-E-002-070). (EI, SCI)

   52.   Fan, Y. T. and Wu, W. F., 2006, “Dynamic Analysis and Ride Quality Evaluation of Railway Vehicles - Numerical Simulation and Field Test Verification,” Journal of Mechanics, Vol. 22, No. 1, pp. 1-11. (Supported by NSC 94-2212-E-002-025). (EI, SCI)

   53.   You, J. S., Kuo, H. T. and Wu, W. F., 2006 “Case Studies of Risk-Informed Inservice Inspection of Nuclear Piping Systems,” Nuclear Engineering and Design, Vol. 236, No. 1, pp. 35-46. (Supported by NSC 92-NU-7-002-001). (EI, SCI)

   54.   Fan, Y. T. and Wu, W. F., 2006, “Stability Analysis and Derailment Evaluation of Rail Vehicles,” International Journal of Heavy Vehicle Systems, Vol. 13, No. 3, pp. 194-211. (EI, SCI)

   55.   Hsu, D., Lin, J.G. and Wu, W.F., 2006, “Electron Spin Resonance Studies on La_0.7-xDy_xSr_0.3MnO₃,” Journal of Magnetism and Magnetic Materials, Vol. 304, Issue 1, pp. e427-e429. (EI, SCI)

   56.   Fan, Y. T. and Wu, W. F., 2006, “Stability Analysis of Railway Vehicles and Its Verification through Field Test Data,” Journal of the Chinese Institute of Engineers, Vol. 29, No. 3, pp. 493-505. (Supported by NSC 94-2212-E-002-025). (EI, SCI)

   57.   Hsu, D., Lin, J.G. and Wu, W.F., 2006, “Low-Current-Induced Electrical Hysteresis in Nd_0.7Ca_0.3MnO₃,” Applied Physics Letters, Vol. 88, Issue 22, 222507. (EI, SCI)

   58.   Wu, W. F., You, J. S., Kuo, H. T. and Wu, C. H., 2007, “Degradation Analysis and Risk-Informed Management of Feedwater System in Nuclear Power Plants,” International Journal of Performability Engineering, Vol. 3, No. 1, pp. 149-168.

   59.   Hsu, D., Lin, J.G., Wu, W.F., Chiang, C.H. and Chan, W.C., 2007, “Current Enhanced Magnetic Proximity in Nd_0.7Ca_0.3MnO₃ /YBa₂Cu₃O₇ Bilayer,” Applied Physics Letters, Vol. 90, Issue 16,162504. (EI, SCI)

   60.   Hsieh, K. C., Ting, K., Chen, K. T., Wu, W. F. and Lu, Y. L., 2007, “The Application of Risk-Informed Inservice Inspection to Recirculation Piping Welds of a Nuclear Power Plant,” Solid State Phenomena, Vol. 120, pp. 213-219. (SCI)

   61.   Hsu, D., Lin, J.G. and Wu, W.F., 2007, “Resistive Switching Effects in Nd_0.7Ca_0.3MnO₃ Magnite,” Journal of Magnetism and Magnetic Materials, Vol. 310, Issue 2, pp. 978-980 (EI, SCI)

   62.   Lin, J.G., Hsu, D., Wu, W.F., Chiang, C.H. and Chan, W.C., 2007, “Proximity Effect of Superconductivity and Ferromagnetism in the Nd_0.7Ca_0.3MnO₃ /YBa₂Cu₃O₇ Bilayer,” Journal of Applied Physics, Vol. 101, Issue 9, 09G106-1. (EI, SCI)

   63.   Hsu, D., Lin, J.G., Wu, W.F., Wu, C.T. and Chen, C.H., 2007, “Voltage-Current Hysteretic Characteristics in ME/Nd_0.7Ca_0.3MnO₃ Thin Films with ME = Au, Pt, Ag, Cu,” IEEE Transactions on Magnetics, Vol. 43, Issue 6, pp. 3067-3069. (EI, SCI)

   64.   張紘睿、吳文方、朱時梁、蕭祝螽，2007，「非破壞檢測可靠度模型之適合度探討」，先進工程學刊，第二卷，第二期，第83-87頁。

  65. Wu, W. F. and Ni, C. C., 2007, “Statistical Aspects of Some Fatigue Crack Growth Data,” Engineering Fracture Mechanics, Vol. 74, Issue 18, pp. 2952-2963. (EI, SCI)

  66. Hsu, D., Lin, J.G. and Wu, W.F., 2007, “Magnetic Pinning-Effect in Nd_0.7Ca_0.3MnO₃/YBa₂Cu₃O₇ Bilayer,” Physica Status Solidi (A), Vol. 204, No. 12, pp. 4170-4173. (EI, SCI)

  67. Hsu, D., Lin, J.G., Chang, C.P., Chen, C.H., Chiang, C.H., Chan, W.C. and Wu, W.F., 2008 “Thickness Dependent Spin-Injection Effects in Nd_0.7Ca_0.3MnO₃/YBa₂Cu₃O₇ Bilayers,” Journal of Applied Physics, Vol. 103, Issue 3, 07C710-1; also selected in Virtual Journal of Applications of Superconductivity, February 15, 2008. (EI, SCI)

  68. Huang, Y.L., Shiu, H.R., Chang, S.H., Wu, W.F. and Chen, S.L., 2008, “Comparison of Combustion Models in Clean-room Fire,” Journal of Mechanics, Vol. 24, Vol. 3, pp. 267-275. (EI, SCI)

  69. Lin, J. G., Hsu, D. and Wu, W.F., 2009, “Interface Effect on the Rewrite-Ability of Nd_0.7Ca_0.3MnO₃/ YBa₂Cu₃O₇ Heterostructure,” accepted and to appear in Thin Solid Films.

  70. Kuo, H.T., Wei, R.C., Wu, W.F. and Yang, J.R., 2009, “Simulated Heat Affected Zone in ASTM A533-B Steel Plates under Low Heat Inputs,” accepted and to appear in Materials Chemistry and Physics.