研究著作

最新研究成果發表(2007-2009)
Recent Research Publication(2007-2009)
Conference

  1. Yee-Pien Yang and Tsung-Hsien Hu, “A new Energy Management System of Directly-Driven Electric vehicle with Electronic Gearshift and Regenerative Braking,” Proceedings of the 2007 American Control Conference, New York, July 11-13, 2007, pp.4419-4424.
  2. Shih-Chin Yang, Yee-Pien Yang, Jieng-Jang Liu, “Design and Control Optimization of Surface-Mounted Permanent-Magnet Machines with High Torque and Low Ripples,” the 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON'07), Taipei, Taiwan, R.O.C., Nov. 5-8, 2007.
  3. Yee-Pien Yang, Tzao-Wei Liu, and Fu-Cheng Wang, “Model Reference Adaptive Control of A Low Power Proton Exchange Membrane Fuel Cell,” the 46th IEEE Conference on Decision and Control, December 12-14, 2007, New Orleans, Louisiana USA.
  4. Fu-Cheng Wang, Hsuan-Tsung Chen, Yee-Pien Yang, Hsin-Ping Chang, “Multivariable Robust Control of a Proton Exchange Membrane Fuel Cell System,” the 46th IEEE Conference on Decision and Control, December 12-14, 2007, New Orleans, Louisiana USA.
  5. Yee-Pien Yang, Zhao-Wei Liu, and Fu-Cheng Wang, “Multivariable Adaptive Control of a Low Power Proton Exchange Membrane Fuel Cell,” The 6th International Fuel Cell Science, Engineering & Technology Conference, June 16-18, 2008, Denver, Colorado, USA.
  6. Jieng-Jang Liu, Yee-Pien Yang and Jia-Hong Xu, “Electromechanical Valve Actuation with Hybrid MMF for Camless Engine,” Proceedings of the 17th IFAC World Congress, Vol. 17, Part 1, July 6-11, 2008, Seoul, Korea.
  7. Yee-Pien Yang and Xian-Yee Xing, “Design of Electric Differential System for an Electric Vehicle with Dual Wheel Motors,” 47th IEEE Conference on Decision and Control, December 9-11, Cancun, Mexico, 2008, pp. 4414-4419.
  8. Yee-Pien Yang and Zhou-Han Lee, “A Novel Wheelchair Powered by Dual Rim Motors,”International Electric Machines and Drives Conference, Miami, May 3-6, 2009, Florida, USA.
  9. Yee-Pien Yang, Jia-Yuan Liang and Xian-Yee Xing, “Design and Application of Axial-Flux Permanent Magnet Wheel Motors for an Electric Vehicle,” 9th IEEE AFRICON Conference, September 23-25, 2009, Nairobi, Kenya.
  10. Yee-Pien Yang, “Design of High Efficiency Motors for Electric Vehicles in Taiwan,” Keynote speaker of International Forum on High Efficiency Electric Motors, invited by International Copper Association, Ltd., Taipei, Taiwan, Dec. 3, 2009.
  11. Yee-Pien Yang and Chih-Fu Wu, “Research on Propulsion Modules for a Wheelchair with Rim Motors,” 2009 CACS International Automatic Control Conference, November 27-29, 2009, National Taipei University of Technology, Taipei, Taiwan.
  12. Yee-Pien Yang, “Research and Development of a Propulsion System for a Hybrid Powered Wheelchair with Innovative Rim Motors,” 2009 CACS International Automatic Control Conference, November 27-29, 2009, National Taipei University of Technology, Taipei, Taiwan.

Journal Papers

  1. Yee-Pien Yang, Jieng-Jang Liu, “Frequency Adaptive Control Technique for Periodic Runout and Wobble Cancellation in Optical Disk Drives”Journal of Systemics, Cybernetics and Informatics, Vol. 4, No. 5, pp.31-35, January, 2007.
  2. Yee-Pien Yang, Member, IEEE, Down-Su Chuang, “Optimal Design and Control of a Wheel Motor for Electric Passenger Cars,” IEEE Trans. Magnetics, Vol. 43, Issue 1, Part 1, 2007, pp.51-61.
  3. Yee-Pien Yang, Fu-Cheng Wang, Hsin-Ping Chang, Ying-Wei Ma, Chih-Wei Huang, Biing-Jyh Weng, “Low power proton exchange membrane fuel cell system identification and adaptive control,” Journal of Power Sources, Volume 164, Issue 2, 10 February 2007, pp. 761-771.
  4. Fu-Cheng Wang, Yee-Pien Yang, Chi-Wei Huang, Hsin-Ping Chang and Hsuan-Tsung Chen, “System identification and robust control of a portable proton exchange membrane full-cell system,” Journal of Power Sources, Volume 164, Issue 2, 10 February 2007, pp. 704-712.
  5. Yee-Pien Yang, Wei-Chin Huang and Chun-Wen Lai, “Optimal Design of Rim Motor for Electric Powered Wheelchair,” IET Electric Power Applications, Vol. 1, No. 5, Sept. 2007, pp. 825-832.   
  6. Yee-Pien Yang, Member, IEEE, Tsan-Jen Wang, Kun-Chang Kuo, and Pu-En Hsu, “Novel Design of Electric Gearshift with Ultracapacitors in the Power Train of Electrical Vehicle with Direct-Driven Wheel Motor,”IEEE Trans. On Vehicular Technology, Vol. 56, No. 5, Sept 2007, pp.1-11.
  7. Yee-Pien Yang, Tzao-Wei Liu, and Fu-Cheng Wang, “An Application of Indirect Model Reference Adaptive Control to a Low-power Proton Exchange Membrane Fuel Cell,” Journal of Power Sources, Vol. 179, Issue 2, 2008, pp. 618-630.
  8. Fu-Cheng Wang, Hsuan-Tsung Chen, Yee-Pien Yang and Jia-Yush Yen, March, Multivariable Robust Control of a Proton Exchange Membrane Fuel Cell System, Journal of Power Sources, Vol.177, No.2, 2008, pp.393-403.
  9. Yee-Pien Yang, Jieng-Jang Liu, and Chia-Hao Tsai, “Improved Estimation of Residual Capacity of Batteries for Electrical Vehicles, Journal of the Chinese Institute of Engineers, Vol.31, No. 2, 2008, pp.313-322.
  10. Yee-Pien Yang and Chun-Pin Lo, “Current Distribution Control of Dual Directly-Driven Wheel Motors for Electric Vehicles,” Control Engineering Practice, Vol.16, Issue 11, Nov. 2008, pp.1285-1292.
  11. Yee-Pien Yang, Shih-Chin Yang and Jieng-Jang Liu, “Optimal Design and Control of a Torque Motor for Machine Tools,” Journal of Electromagnetic Analysis and Applications (to appear in Dec. 2009).  
  12. Yee-Pien Yang and Tsung-Hsien Hu, “A New Energy Management System of Directly-Driven Electric Scooter,” Energy Conversion and Management (to appear in 2010).

                                                           

(C) 專利 (Patents)：

  1. 陽毅平, 輪椅手輪管形線性馬達，中華民國專利新型申請案號094102828，公告號200626118。
  2. 王燦鎮、徐普恩、郭昆璋與陽毅平, 2007,電子換檔系統與方法,中華民國發明專利(發明第I290896號, 2007.07.01)
  3. 陽毅平, 2007,輪椅馬達驅動結構,中華民國發明專利(發明第I278308號, 2007.04.11)
  4. 周瑞仁、黃肇湘、揚棧雲、章良渭與陽毅平, 2006,書頁拾取機構,中華民國發明專利(發明第I253992號, 2006.05.01)
  5. 章良渭、陳家榮、高進欽、李志清、張振勝、壽明驊與陽毅平, 2004,無動力車具之自動煞車裝置, 中華民國發明專利(發明第M248446號, 2004.01.09)
  6. 吳煌榮 、鍾添東與陽毅平, 2004,汽車座椅之旋轉及升降機構,中華民國發明專利(發明第00586500號, 2004.05.01)
  7. 章良渭與陽毅平, 2004,電動可調姿勢輪椅,中華民國發明專利(發明第257801號, 2004.05.13)

專書 (Books)：

  1. 工程發展與社會變遷, 陽毅平, 張文亮等, 國立臺灣大學通識課程教學參考資料叢書。

 得獎紀錄 (Awards)：

  1. 2008年以「輪椅馬達驅動結構」榮獲「財團法人徐有庠先生紀念基金會」生技醫藥類『第六屆有庠科技獎』暨『第三屆有庠科技發明獎』
  2. 『手輪馬達電動輪椅』榮獲第三屆(2007) 國家生技醫療產業策進會的『國家新創獎』學術研究組獎。
  3. 指導碩士學生楊士進榮獲第四屆上銀科技機械碩士論文工具機特別獎, 97.3.29。
  4. 指導碩士學生范勝凱榮獲第三屆上銀科技機械碩士論文獎, 96.3.31。
  5. 指導博士學生劉建章榮獲2005第三屆計算通訊與控制會議 (The 3rd International Conference on Computer, Communications and Control Technologies, Texas, Austin, USA, July 24-27, 2005) 榮獲最佳論文獎。

 

之前的著作