Navigation





Lab Profile

 

范光照教授著作列表:h-index Scopus = 23 (到2015.06)

  • iconred期刊論文:SCI: 86, EI: 30
  1. JP Sadler, RW Mayne and KC Fan, 1980, “Generalized study of crank-rocker mechanism driven by a DC motor. 1. Mathematical Model,” Mechanism and Machine Theory, Vol. 15, Issue 6, pp. 435-445. (SCI, Cited: 11).
  2. JP Sadler, RW Mayne and KC Fan, 1980, “Generalized study of crank-rocker mechanism driven by a DC motor. 2. Applications,” Mechanism and Machine Theory, Vol. 15, Issue 6, pp. 447-461. (SCI, Cited: 4).
  3. K.C. Fan, 1988, "Application of a Laser Interferometer for the Calibration of Angular Indexing", J. of CSME, Vol. 9, No. 1, pp.63- 69. (EI)       
  4. 范光照, 方承彥, (1989),"多功能工具機誤差檢測系統之研製", 台大工程學刊, No.45, pp.65-89.
  5. K. C. Fan, 1989, "Generalized Study of Volumetric Error Analysis for NC Machine Tools and CMMS, Parts One-Mathematical Model", J. of CSME, Vol. 10, No.2, pp.135-144. (EI, Cited: 2)
  6. K. C. Fan, 1989, "Generalized Study of Volumetric Error Analysis for Machine Tools and CMMS, Part Two-Applications," J. of CSME, Vol. 10, No.2, pp.145-152. (EI, Cited: 2)
  7. K.C. Fan, (1989), "Design of Positional Compensator for Multi-Axis NC Machine Tools," AMSE Press, Vol. 6, pp. 179-189.
  8. K. C. Fan and Y. H. CHAO, (1991), "In-Process Dimensional Control of Workpiece in Turning," Precision Engineering, Vol. 13, No. 1, pp. 27-32. (SCI, Cited: 10)
  9. K. C. Fan and H. C. Wen, (1991), "Computer-Aided Calibration of Surface Flatness of Gauge Blocks," J. of the CSME, Vol. 12, No.4, pp.427-434. (EI, Cited: 5)
  10. J.T. Hong, Y.S. Liao and K.C. Fan (1991), "A Computational Geometry Approach to Minimum Zone valuation of Straightness," J. of Chinese Institute of Engineers, Vol.14, No.5, pp.463-470. (SCIE, Cited: 6)
  11. K.C. Fan, Y.H. Chen, (1991), “Design of in-process dimensional error compensator for precision NC turning,” J. CSME, Vol. 17, No. 3, pp.213-220. (EI)       
  12. K. C. Fan, T. S. Kuo and C. J. May, (1991), "System Integration of CMM and CAD/CAM on a Microcomputer," Proceedings of the NSC, Part A., Vol. 15, No. 5, pp.396-403.
  13. S.T. Huang, K.C. Fan, and John H. Wu (1993), "A New Minimum Zone Method for Evaluating Flatness Errors," PRECISION ENGINEERING: J. OF ASPE, Vol. 13, No. 1, pp.25-32. (SCI, Cited: 51)        
  14. S. T. Huang, K.C. Fan, John H. Wu, (1993), "A New Minimum Zone Method for Evaluating Straightness Errors," PRECISION ENGINEERING, J. of ASPE, Vol. 15, No. 3, pp.158-165. (SCI, Cited: 80)         
  15. S.T. Huang, K.C. Fan, and John H. Wu, (1993), "A Minimum Zone Method for Evaluating Gage Blocks Measured by Phase-Shifting Interferometry," J. of Chinese Institute of Engineers, Vol. 16, No. 5, pp. 641-650. (SCI)
  16. K.C. Fan, (1996),"Design of In-process Dimensional Error Compensator for Precision NC Turning," J. of the CSME, Vol.17, No.3, pp.213-220. (EI, Cited: 1)
  17. J.Y. Yen, C.S. Jang, and K.C. Fan, (1996), "Servo Design for a 3D Tracking Measurement System," ASME J. of Dynamic Systems, Measurement, and Control, Vol. 118, pp. 476-481. (SCI Cited: 3)
  18. C. Chou, L.Y. Chou, K.C. Fan, et al.,(1997) "CCD Based CMM Geometrical Error Measurement Using Fourier Phase Shift Algorithm," Int. J. of Machine Tools and Manufacture, Vol. 37, No. 5, pp.579-590. (SCI, Cited: 15)         
  19. K.C. Fan and F.C. Shiou, (1997) "An Optical Flatness Measurement System for Medium-sized Surface Plates," Precision Engineering, Vol.21, No. 1, pp.102- 112. (SCI, Cited: 3)
  20. K.C. Fan, (1997) "A Non-contact Automatic Measurement for Free-form Surface Profiles," Computer Integrated Manufacturing, Vol. 10, No. 4, pp.277-285. (SCI, Cited 46)         
  21. K.C. Fan, M.J. Chen and W.M. Huang, (1998), "A Six-degree-of-freedom Measurement System for the Motion Accuracy of Linear Stages," Int. J. of Machine Tools and Manufacture, Vol. 38, No. 3, pp.  155-164. (SCI, Cited: 36)          
  22. K.C. Fan and M.C. Leu, (1998) "Intelligent Planning of CAD-directed Inspection for Coordinate Measuring Machines," Computer Integrated Manufacturing, Vol. 11, No. 1-2, pp. 43-52. (SCI, Cited: 35)        
  23. K.C. Fan, C.Y. Lin and L.H. Shyu, (1998)"Positional Error Compensation of a Precision Microstage," J. of CSME, Vol. 19, No. 6, pp. 543-548. (EI, Cited: 2)
  24. 張青, 范光照, 徐振高, 李柱, (1998) "按最小條件評定空間直線度誤差的理論研究", 計量學報 (ACTA Metrologica Sinica), Vol. 19, No. 4, pp. 246-253. (EI, cited 13)
  25. 范光照 (1998)"高精度工具機熱變形補償控制技術," NSC Monthly, Vol.26, No. 5, p.520-529. 
  26. K.C. Fan and J.C. Lee, (1999)"Range Image Segmentation of Mechanical Parts by Locating Critical Points of One Dimensional Curves," J. of the CSME, Vol. 20, No. 1, pp. 21-27. (EI)
  27. K.C. Fan and J.C. Lee (1999)"Analysis of Minimum Zone Sphericity Errors Using Minimum Potential Energy Theory," Precision Engineering, Vol. 23, No. 2, pp 65-72. (SCI Cited: 21)
  28. Q. Zhang, K.C. Fan and Z. Li (1999) "Evaluation Method for Spatial Straightness Errors Based on Minimum Zone Condition," Precision Engineering, Vol. 23, No. 4, pp.264-272. (SCI, Cited: 20)
  29. K.C. Fan, C.Y. Lin and L.H. Shyu (2000) "Development of a Low-cost Focusing probe for Profile Measurement," Measurement Science and Technology, Vol. 11, No. 1, pp. 1-7. (SCI, Cited: 52)
  30. K.C. Fan and M. J. Chen (2000) "A Six -degree-of-freedom measurement system for the accuracy of X-Y Stage," Precision Engineering, Vol. 24, No. 1, pp. 15-23. (SCI, Cited: 42) 
  31. K.C. Fan and Y. Zhao (2000) "A Laser Straightness Measurement System Using Optical Fiber and Modulation Technique," Int. J. of Machine Tool and Manufacture, Vol.40, pp. 2073-2081. (SCI, Cited: 24)
  32. T.H. Tsai and K.C. Fan (2000) "A Mathematical Model and Procedure for Calibrating a 3D Measurement System with a Zoom-Lens camera," J. of Chinese Society of Mechanical Engineers, Vol. 21, No. 3, pp. 223-227. (EI, Cited: 5)
  33. K.C. Fan and T.H. Tsai (2001) "Optimal Shape Error Analysis of the Matching Images for Free-form Surfaces," Robotics and Computer-Integrated Manufacturing, Vol. 17, pp. 215-222. (SCI, IF: 0.352, Cited: 34)
  34. K.C. Fan, C.D. Su and J.I. Mou (2001) “Error Analysis for Diffraction Grating Interferometric Stylus Probing System”, Measurement Science and Technology, Vol. 12, No. 4, pp.482-490. (SCI, IF: 1.118, Cited: 8)
  35. K.C. Fan, C.L. Chu and J. I. Mou, (2001) “Development of a Low-Cost Autofocusing Probe for Profile Measurement,” Measurement Science and Technology, Vol. 12, pp. 2137-2146. (SCI, IF: 1.118, Cited: 63)
  36. 范光照、龍清勇、賴信焜、廖偉博(2001)"粉末冶金業電子化生產資訊管理系統建置," 中華民國粉末冶金協會期刊, Vol.26, No.3, pp. 169-177.
  37. T.H. Tsai, K.C. Fan and J.I. Mou, (2002) “A Variable Resolution Optical Profile Measurement System,” Measurement Science and Technology, Vol.13, pp. 190-197. (SCI, IF: 1.118, Cited: 9 )
  38. K.C. Fan, M.Z. Lee and J.I. Mou (2002) “On-line Non-contact System for Grinding Wheel Wear Measurement,” Int. J. of Advanced Manufacturing Technology, Vol. 19, pp. 14-22. (SCI, IF: 0.352, Cited: 23)
  39. K.C. Fan, J.W. Zhao, T.H. Chang and Z. Li (2002) “Error Analysis of a Serial-Parallel Type Machine Tool,” Int. J. of Advanced Manufacturing Technology, Vol. 19, pp. 174-179. (SCI, IF: 0.352, Cited: 7).
  40. K. C. Fan, C. C. Ho and J. I. Mo (2002) “Development of a Multiple-Microholes Aerostatic Air Bearing System Development,” Journal of Micromechanics and Microengineering Vol. 12, pp. 636-643. (SCI, IF: 2.048, Cited: 21)
  41. C. Y. Lung, K. C. Fan and J. I. Mou (2002) “Development of a Powder Warming Compacting machine with an Electrical Heating System,” Int’l Journal of Powder Technology, Volume 127, Issue 3, pp. 267-273. (SCI, IF: 0.389, Cited: 4)
  42. Hsu, Z.Q., Ye, S.H. and Fan Q. Z., (2002) “Color 3D reverse engineering,” Journal of Materials Processing Technology, Vol.129, Issue 1-3, 11 October 2002, pp. 495-49. (SCI, cited 13)
  43. K. C. Fan, C. L. Chu, J. L. Liao and J. I. Mou (2003), “Development of a High Precision Straightness Measuring System with DVD Pick-up Head,” Measurement Science & Technology, Vol. 14, pp. 47-54. (SCI, IF: 1.118, Cited: 25)
  44. K.C. Fan, H. Wang, F. J. Shiou and C. W. Ke (2003), “Development of a 3D Laser Ball Bar for the Volumetric Error Measurement of Multi-axis Machines,” Transaction of NAMRC, Vol. 31, pp. 249-256. (SCI, Cited: 5)
  45. K. C. Fan, H. Wang, J. W. Zhao and T. H. Chang (2003), “Sensitivity Analysis of the 3-PRS Parallel Kinematic Spindle Platform of a Serial-Parallel Machine Tool,” Int’l Journal of Machine Tool and Manufacture, Vol. 43, Issue 15, pp. 1561-1569. (SCI, IF: 1.183, Cited 40)
  46. Lee, R. S., J. P. Tsai, Y. C. Kao, Grier C. I. Lin and K. C. Fan (2003), “STEP-based product modeling system for remote collaborative reverse engineering,” Int’l Journal of Robotics and Computer-aided Manufacturing, Vol. 19, Issue 6, pp.543-553. (SCI, IF: 0.699, Cited: 10)
  47. 范光照, 朱志良, 鍾添東 (2003), “微型三座標測量機之研製”, 纳米技术与精密工程, (in Chinese), Vol. 1, pp. 17-23.
  48. Chih-Liang Chu, Kuang-Chao Fan*, and Ye-Jing Chen, (2004) “A Compensation Method for the Hysteresis Error of DVD VCM,” Measurement Science & Technology, Vol. 15, pp. 737-740. (SCI, IF: 1.118, Cited: 5)
  49. Hai Wang and Kuang-Chao Fan (2004) “Identification of Strut and Assembly Errors of a 3-PRS Serial-Parallel Machine Tool,” Int’l Journal of Machine Tool and Manufacture, Vol. 44, pp. 1171-1178. (SCI, IF: 1.183, Cited: 25)
  50. K.C. Fan, H. Hsiao, L. Luong, G. Lin and N. Wu, (2004) “Development of a New Self-sufficient Model for University Incubator,” International Journal of Innovation and Incubation, Vol. 1, No. 1, pp. 33-50.
  51. K.C. Fan, H. Wang, F. J. Shiou and C. W. Ke, (2004) “Design Analysis and Applications of a 3D Laser Ball Bar for Accuracy Calibration of Multiaxis Machines,” J. of Manufacturing Systems, Vol. 23, No. 3, pp. 194-203. (SCI, IF: 0.271, Cited: 2)
  52. Kuang-Chao Fan, Wang Weili, and Cheng Fang (2004) “Innovative design of a new bridge,” Chinese Journal of Mechanical Engineering, Vol. 17, No. 2, pp. 170-173. (EI)
  53. 范光照, 李瑞君, 宋欣明 (2004) “一種新型光纖傳像微三維測量系統,” 納米技術與精密工程期刊, Vol. 2, No. 4, pp. 302-307.
  54. 李瑞君, 范光照, 吳彰良 (2004) “線結構傳感器的精度分析及優化設計,” 合肥工業大學學報 (自然科學版), Vol.10, pp.1-8.
  55. 李瑞君,范光照,王永红,程真英,“一种基于传像束的新型微三维形貌测量系统”,工业计量,第15卷,第1期,2005年1月,18-20
  56. K.C. Fan and Y.J Chen, (2005) “A Study on the Mechanism of a New High-Speed Scanning Miniature Nano-Measurement Probe,” Int’l Journal of Key Engineering Materials— Measurement Technology and Intelligent Instruments, pp. 71-76. (SCI, IF: 0.278, Cited 1)
  57. Chen, L.C., S.H. Tsai and K.C. Fan, (2005) “A New Three-dimensional Profilometer for Surface Profile Measurement Using Digital Fringe Projection and Phase Shifting,” Key Engineering Materials 295-296, pp. 471-476. (SCI, IF: 0.278)
  58. K.C. Fan, W.L. Lin, T.T. Chung, H.Y. Wang and L.P. Wu (2005) “A Miniature Low-cost and High Reliability 1x2 Mechanical Optical Switch,” Journal of Micromechanics and Microengineering, 15, pp. 1565-1570. (SCI, impact factor: 2.048, Cited: 4, also included in Solid State & Superconductivity Abstracts database from CSA)
  59. K.C. Fan and C. Hsu (2005) “Strategic planning of developing automatic optical inspection (AOI) technologies in Taiwan,” J. of Physics—Conference Series, 13, pp. 394-397. (ISTP, Cited: 4)
  60. K.C. Fan, L.C. Chen and C.D Lin (2005) “Development of Dynamic 3-D Surface Profilometry Using Stroboscopic Interferometric Measurement and Vertical Scanning Techniques,” J. of Physics—Conference Series, 13, pp. 51-54. (ISTP, Cited: 7)
  61. 王偉麗, 范光照, 劉玉聖 (2005) 基於共平面二維工作平臺的精密測量系統, 中國計量學院學報. 16(4): 264-267. (cited: 4)
  62. 陳葉金, 范光照, 劉玉聖 (2005), 納米三座標測量機的探頭測量系統研究, 中國材料科技與設備, 2(4): 32-35.
  63. K.C. Fan, R.J. Li and H.M. Song (2006) “Fiber image techniques in digital stereomicroscopy,” Measurement Science & Technology, Vol. 17, pp.373-378. (SCI, IF: 1.228, Cited: 2)
  64. Chen, Y.J., Fan, K.C., Liu, Y.S., (2006), “Innovative micro/nano probe measurement system for 3D profile of microcomponent,”Acta Metrologica Sinica 27 (1): pp. 12-17. (EI, cited 2)
  65. 王偉麗, 范光照 (2006), 一種微型三坐測量機橋架結構的新型設計. 工業計量, 16(1): pp. 7-10.
  66. 王偉麗, 范光照, 程方 (2006), 新型納米級二維工作臺的參數測試. 機械製造, 44(2): pp. 64-67.
  67. Chen, Yejin; Fan, Guangzhao; Liu, Yusheng (2006), ”Research on the static tracing character of voice coil motor in DVD pickup head,” (in Chinese) Chinese J of Scientific Instrument, 27 (2), pp. 671-674. (EI, cited 2)
  68. Fan, K.C., Yen, R.H. and Ho, C.C. (2006) “Study of a Miniature Linear Bearing Stage System,” Materials Science Forum, Vol. 505-507, pp. 13-18. (SCI, IF: 0.498)
  69. W.L. Lin, K.C. Fan, L.H. Chiang, Y.J. Yang, W.C. Kuo, T.T. Chung (2006) “A novel micro/nano 1x4 mechanical optical switch,” J. of Micromechanics and Microengineering, Vo. 16, No. 7, pp. 1408-1415. (SCI IF: 2.499, Cited: 3)
  70. K.C. Fan, Y.T. Fei, X.F. Yu, Y.J. Chen, W.L. Wang, F. Chen and Y.S. Liu (2006) “Development of a low cost Micro-CMM for 3D Micro/nano Measurements,” Measurement Science & Technology, Vol. 17, pp. 524-532. (SCI, IF: 1.118, Cited: 29)
  71. Torng, J.S., Fan, K.C. and Lu, T. F. (2006) “A Genetic Approach on the PID Control of VCM for Auto-focusing Laser Probe,” Materials Science Forum, Vols. 505-507, pp. 373-378. (SCI, IF: 0.498, Cited: 1)
  72. Chung, T.T., Lee, C.C. and Fan, K.C. (2006) “Optimum Design of a 1x2 Mechanical Optical Switch,” Journal of Structural and Multidisciplinary Optimization, No.3, Vol.31, pp. 229-240. (SCI, IF:0.803, Cited: 6)
  73. Yang, Y.J., Kuo, W.C. and Fan, K.C. (2006) “Single-Run Single-Mask Inductively-Coupled-Plasma Reactive-Ion-Etching Process for Fabricating Suspended High-Aspect-Ratio Microstructures,” Japanese J. of Applied Physics, Vol. 45, No. 1A, pp. 305-310. (SCI, IF:1.142, Cited: 4 )
  74. Fan, K.C., Cheng, F., and Chen, Y.J. (2006) “Nanopositioning Control on a Commercial Linear Stage by Software Error Compensation,” Nanotechnology and Precision Engineering (China), Vol. 4, No. 1, pp. 1-9. (EI, Cited: 12)
  75. Chung, T.T., Lee, C.C., Fan, K.C., Lin, W.L., Pen, J.G., Fan, H. (2006) “A Miniature 1x2 Mechanical Optical Switch with anti-thermal Design,” Journal of Micromechanics and Microengineering, 16, pp. 1579-1586. (SCI, impact factor: 2.499, Cited: 1)
  76. Fan, K.C., Hsu, H. Y., Hung, P.Y., and Wang, W.L. (2006) “Experimental study of fabricating a micro ball tip on the optical fiber,” J. of Optics A: Pure and Applied Optics, 8, pp. 782-787. (SCI, impact factor: 1.295, Cited: 15)
  77. Chen Y.J, Fan K.C., Liu Y.S. (2006) ” A Research on Static Tracing Character of Voice Coil Motor of DVD Pickup Head”, Chinese Journal of Scientific Instrument
  78. Chen Y.J., Fan K.C., Liu, Y.S. (2006)” A research on probe measurement system of nano-CMM”, Chinese Materials Science Technology & Equipment, 2(4):32~35.
  79. Kuang-Chao Fan, Yi-Cheng Liu, Chih-Liang Chu (2006) "Design Analysis of Voice Coil Motor for Active Vibration Isolation", Journal of the Chinese Society of Mechanical Engineers, Vol. 27, No. 5, pp. 501~506. (EI)
  80. Hsiao, Y.C., Fan, K.C., et al. (2006) ”Privatization of University Incubator: Formation Process of a For-profit University Incubator,” International Journal of Innovation and Incubation, Vol. 3, No. 1, pp. 1-18.
  81. Chen Yejin, K. C. Fan, Liu Yusheng and Cheng Fang (2007) “A high precision focus probe for the quality assessment of grating pitch,” Key Engineering Material, Vol. 339, pp. 200-205. (EI) (cited 0)
  82. Lin, W.L., Fan, K.C., Chiang, L.H., Yang, Y.J., Kuo, W.C., Chung, T.T. (2006) “A novel micro/nano 1×4 mechanical optical switch,” Journal of Micromechanics and Microengineering, 16 (7), pp. 1408-1415. (SCI, impact factor: 2.499, cited 3)
  83. Fan, K.C., Fei, Y.T., Yu, X.F., Wang, W.L., Chen Y.J (2007) “Study of a Noncontact Type Micro-CMM with Arch-bridge and Nanopositioning Stage,” Robotics and Computer-aided Manufacturing, Vol. 23, Issue 6, pp.276-284. (SCI, IF: 0.810, Cited:12)
  84. Fan, K.C (2007) “An intelligent thermal error compensation system for CNC machining Center,” J. of Chinese Society of Mechanical Engineers, Vol. 28, No. 1, pp. 81-90 (SCI, Cited: 4).
  85. Chu C. L., Lin, C. H. and Fan, K.C. (2007) “Two-dimensional optical accelerometer based on commercial DVD pick-up head,” Measurement Science and Technology, Vol. 18, pp. 265-274. (SCI, IF: 1.228, Cited: 14)
  86. Fan, K.C., Lai, Z. F., Wu, P.C., Chen, Y.C., Chen, Y.J. and Jager, G. (2007) “A displacement spindle in micro/nano level,” Measurement Science and Technology, 18, 1710-1717. (SCI, IF: 1.228, Cited: 10)
  87. Tung-Hsien Tsai and Kuang-Chao Fan (2007) “An image matching algorithm for variable mesh surfaces,” Measurement (40), pp. 329-0337. (SCI, IF: 0.525, Cited: 2)
  88. Yao-Jeo Yang, Wen-Cheng Kuo, Kuang-Chao Fan, Wu-Lang Lin (2007) “A 1 × 2 optical fiber switch using a dual-thickness SOI process,” J of Micromechanics and Microengineering, 17, pp. 1034-1041. (SCI, IF 2.321, Cited 6)
  89. Liang-Chia Chen, Kuang-Chao Fan, et al., (2007) “A dynamic 3-D surface profilometer with nano-scale measurement resolution and MHz bandwidth for MEMS characterization," IEEE/ASME Transactions on Mechatronics , Vol. 12, No.3, pp. 299-307. (SCI, IF: 0.979, Cited 18)
  90. Fan, K.C., Liao, W.B., Chen, C.Y. and Chen, S.H (2007) “An AOI system and defect classification for powder metallurgy parts,” Bulletin of Powder Metallurgy Association (Taiwan), Vol. 32, No. 5, pp. 175-184.
  91. Fan, K.C., Wang, W.L. and Chiou H.S. (2008) “Fabrication optimization of a micro-spherical fiber probe with the Taguchi method,” J of Micromechanics and Microengineering, 18, 0150111, pp. 1-8. (SCI, IF 1.930, Cited: 8).
  92. Y. J. Yang, M. Y. Cheng, W. Y. Chang, K.C. Fan, et al, (2008) “An integrated flexible temperature and tactile sensing array using PI-copper films,” Sensors and Actuator A: Physics, 143, pp. 143-153. (SCI, IF 1.348, Cited: 41)
  93. Ching-Fen KAO, Sheng-Hua LU, Hsin-Mao SHEN, and Kuang-Chao FAN, (2008) “Diffractive Laser Encoder with a Grating in Littrow Configuration”, Japanese Journal of Applied Physics, Vol. 47, No. 3, pp. 1833–1837 (SCI, IF: 1.247, Cited: 11)
  94. Fan, K.C., Chen, J.Y., Wang, S, H. and Pan, W. J. (2008) “Development of a drop-on-demand droplet generator for one-drop-fill technology,” Sensors and Actuator A: Physics, 147 649–655 (SCI, IF 1.348, Cited: 16).
  95. Fan, K.C. and Lai, Z.F., (2008) “An Intelligent Nano-positioning Control System Driven by an Ultrasonic Motor,” International J. of Precision Engineering and Manufacturing, Vol. 9, No. 3, pp. 40-45. (SCI, Cited: 10)
  96. Liu, Y.C., Fan, K.C., Chu, C.L., Werner, C. and Jaeger, G. (2008), “Development of an optical accelerometer for low frequency vibration using the voice coil on DVD pickup head,” Measurement Science & Technology, Vol. 19, Issue 8,084012, pp. 1-7. (SCI, IF: 1.493, Cited 8)
  97. Liu, Y.C., Fan, K.C., Chu, C.L., (2008), “Development of a constant temperature environment chamber with high stability,” Material Science Forum, Vol. 594, pp. 78-83. (EI, Cited: 1)
  98. Tsao, L.C., Chang, D.R., Shih, W.P. and Fan, K.C., “Fabrication and characterization of electro-active polymer for flexible tactile sensing array,” Key Engineering Materials, Vol. 381-382, pp. 391-394, 2008. (EI, Cited: 1)
  99. Wang, F.C., Lin, H. M., Fan K.C., et al., “Signal detection and control of an intelligent robot,“ Key Engineering Materials, Vol. 381-382, pp. 387-390, 2008. (EI, cited 0)
  100. Y.J. Yang, B.T. Chia, D.R. Chang, H.H. Liao, W.P. Shih, F.Y. Chang, K.C. Fan (2008), “Development of A Flexible Temperature Sensor Array System,” Key Engineering Materials, Vol. 381-382, pp. 383-386. (EI, cited 0)
  101. Zhang, H., Cai. Z. and Fan, K.C., (2008) “The development of a separate mini-environment,” Key Engineering Materials, Vol. 381-382, pp. 65-68. (EI, cited 0)
  102. 范光照, 廖偉博, 陳智遠, 陳守恒, 周睿程, “環形粉末冶金件之自動光學檢測,” 粉末冶金會刊第33卷第3期, 2008. (獲選粉末冶金學會論文獎)
  103. F.C. Wang, H.W. Wang, P.K. Chen, H.M. Lin and K.C. Fan, (2008) “Sense and control of a companion robot,” J. of CSME, Vol. 29, issue 6, pp. 483-489. (SCI, Cited: 4)
  104. Fan, K.C., Lin, W.L., Chiang, L.H., Chen, S.H., Chung, T.T. and Yang, Y.J. (2009), “A miniature 2×2 mechanical optical switch with a thin MEMS mirror,” J. of Lightwave Technology, Vol. 27, No. 9, pp. 1155-1161. (SCI, IF: 2.736, Cited: 4)
  105. Fan, K.C., Chen, J.Y., Wang, C.H. and Pan, W.C. (2009), “Precision in-situ volume measurement of micro droplet,” J. of Optics A: Pure and Applied Optics, Vol. 11, Issue 1, 015503, pp. 1-8. (SCI, IF:1.752, cited 1)
  106. Fan, K.C., Chen, S.H., Chung, T.T. and Yang (2009), “A N×N architecture for 2-D Mirror-Type optical switches,” J. of Lightwave Technology, Vol. 27, No. 14, pp. 2843-2851. (SCI, IF: 2.736, Cited: 1)
  107. Fan, K.C., Zhi-Yua Ke and Bai-Kun Li (2009), “Design of a Novel Low-Cost and Long-Stroke Co-Planar Stage for Nanopositioning,” Technisches Messen, Vol. 76, Issue 5, pp. 248-252. (SCI, IF: 0.130, Cited: 2)
  108. Tien-Tung Chung, Chin-Te Lin, Chung-Yun Lee, Kuang-Chao Fan, and Shou-Heng Chen, (2009) "Optimum Design of an 8x8 Optical Switch with Thermal Compensated Mechanisms", World Academy of Science, Engineering and Technology, vol.53, pp.134~141. (EI)
  109. Zhang, H., Fan, K.C. and Wang, J. (2010), “System design and simulation of constant temperature box using semiconductor refrigeration device,” IJCAT, Vol. 37, No. 2, pp. 146-152. (EI, Cited: 3)
  110. Yang YJ, Liao BT, Shih SC and Fan KC (2010), “The Development of an 8x8 Optical Switch,” J of Chinese Institute of Engineers, Vol. 33, No. 1, pp. 37-43. (SCI, IF:0.219)
  111. Fan. K.C., Cheng, F., Chen, Y.J., Wang, W.L. and Lin, C.Y, (2010) “A scanning contact probe for micro coordinate measuring machine (CMM),” Measurement Science and Technology, Vol. 21, 054002, pp. 1-7 (SCI, IF: 1.371, Cited: 4)
  112. Yang, Y.J., Cheng, M. Y., Shih, S.C., Huang, X. H., Tsao, C.M., Chang, F.Y, Fan, K.C.,(2010) “A 32×32 temperature and tactile sensing array using PI-copper films,” Int. J. of Advanced Manufacturing Technology, Vol. 46, pp. 945-956. (SCI, IF:1.128, Cite: 9)
  113. Shih, W.P., Tsao, L.C., Lee, C.W., Cheng, M.Y., Chang, C.L., Yang, Y.J. and Fan, K.C., (2010) “Flexible Temperature Sensor Array Based on a Graphite-Polydimethylsiloxane Composite,” Sensors, Vol. 10, pp. 3597-3610. (SCI, IF:1.821, Cited: 9)
  114. Fan, K.C., Chen, J.Y., Chen, S.H, Liao, W.P., (2010), “Development of auto defect classification system on porosity powder metallurgy products,” NDT & E International, Vol. 43, pp. 451-460. (SCI, IF:1.323, Cited: 1)
  115. Fan, K.C., Cheng, F., Pan, W.T., Li, R.J., (2010), “Analysis of a contact probe mechanism for micro-coordinate measuring machines,” J. of Avtometriya (in Russian), Vol.46, No. 4, pp. 54-62. (EI).
  116. Cheng, F., Fan, K.C., Fei, Y.T., (2010) “Measurement of Pre-travel Distance of a Touch Probe for Nano-CMM,” Nanotechnology and Precision Engineering, Vol. 8, No. 2, pp. 107-112. (EI, Cited: 2)
  117. Fan, K.C., Cheng, F., Pan, W.T., Li, R.J., (2010), “Analysis of a contact probe mechanism for micro-coordinate measuring machines,” Optoelectronics, Instrumentation and Data Processing, Vol.46, No. 4, pp. 340-346. (EI)
  118. B. Liao, Y. Yang, B. Chia, S. Shih, K. Fan, (2010), "A 2x2 Split Cross-Bar Optical Switch Using a Hybrid Actuation Configuration,” IEEE Journal of Lightwave Technology, Volume: 28, Issue: 20, pp. 2905-2911 (SCI, IF:2.185).
  119. N. Islam, R. M. Parkin, M. R. Jackson, S. Elmas, Z. Kesy and K.C. Fan (2010) “Performance analysis of a robust proportional-integral-derivative control technique for the auto-focusing mechanism of an optical surface profile measurement system,” Proc. of Institution of Mechanical Engineers Part I: J of Systems and Control Engineering, Vol.224, Issue 16, pp. 635-646. (SCI, IF:0.447)
  120. K.C. Fan, T.H. Wang, S.Y. Lin and Y.C. Liu (2011) “Design of a dual-axis optoelectronic level for precision angle measurements,” Measurement Science and Technology, Vol. 22, 055302, pp. 1-7. (SCI, IF: 1.494, Cited: 2)
  121. Zhang, H., Fan, K.C., Wang, J. (2011) “System design and simulation of constant temperature box using semiconductor refrigeration device,” IJCAT, Vol. 38, No. 3, pp. 284-290. (EI)
  122. Cheng, F and Fan, K.C. (2011) “A Linear Diffraction Grating Interferometer with High Alignment Tolerance and High Accuracy,” Applied Optics, Vol. 50, No. 22, pp. 4550-4556. (SCI, IF: 1.703, Cited: 3)
  123. K.C. Fan and F. Cheng, (2011) “High-resolution Angle Measurement based on Michelson Interferometry,” Physics Procedia, Vol. 19, pp. 3-8. (EI)
  124. W.P. Shih, C.K. Lee, C.W. Lee, L.C. Tsao. Y.J. yang, K.C. Fan (2011) “A comparison of polymer composites for development of flexible sensor array,” J. CSME, Vo. 32, no. 3, pp. 267-272. (SCI)
  125. K.C. Fan, B.C. Lee and Y.C. Chung (2011) “Planar Laser Diffraction Encoder in Littrow Configuration for 2D Nanometric Positioning,” International Journal of Automation and Smart Technology, Vol. 1, No. 2, pp. 93-99.
  126. K.C. Fan, H.M. Chen, T. H. Kuo (2012) “Prediction of Machining Accuracy Degradation of Machine Tools,” Precision Engineering, Vol. 36, pp. 288-298. (SCI, IF: 1.167)
  127. Fan, K.C., Cheng, F, Wang, H.Y. and Ye, J.K (2012) “The System and the mechatronics of a pagoda type Micro-CMM,” Invited paper, Int. J. of Nanomanufacturing (IJNM), Vol. 8, No. 1/2, pp. 67-86 (EI).
  128. K.C. Fan, J.S. Torng, W.Y Jywe and R.C. Chou (2012) “3-D Measurement and Evaluation of Surface Texture Produced by Scraping Process Measurement,” Measurement, Vol. 45, pp. 384-392. (SCI, IF: 0.836)
  129. T.H. Tsai and K.C. Fan (2012) “Calibration and analysis of eccentric error of the laser rotary-scanning measurement system,” Measurement, Vol. 45, pp. 47-53. (SCI, IF: 0.836)
  130. H.M. Chen, K.C. Fan, T.H. Kuo, C.H. Wang (2012) “Development of a Low Cost In-Process Chatter Suppression System in Milling Process,” J. CSME, accepted.(SCI)
  131. R.J. Li, K.C. Fan, Q.X. Huang, J.Z. Qian, W. Gong, Z.W. Wang (2012) “Design of a Large Scanning Range Contact Probe for Nano-Coordinate Measurement Machines (CMM),” Optical Engineering, Vol. 51, No. 8, 081503, pp: 1-9. (SCI)
  132. R.J. Li, K.C. Fan, et al., (2012) “Stability Analysis of a Contact Scanning Probe for Micro/nano-CMM,” Nanotechnology and Precision Engineering, Vol. 10, No. 2, March, pp. 125-131. (EI)
  133. F. Cheng, K.C. Fan, J.W. Miao, B.K. Li, H. Y. Wang (2012) “A BPNN-PID based long-stroke nanopositioning control scheme driven by ultrasonic motor Precision Engineering,” Precision Engineering, Vol. 36, pp. 485-493. (SCI, IF: 1.167)
  134. F.J. Shiou, K.C. Fan, K.M. Pan, Z.Y. Ke (2012) “Development of a Meso-scale Machine Tool and the preliminary Cutting tests of Oxygen-free Copper using a Polycrystalline Diamond Tool,” Computer-Aided Design and Applications, v. 9, n. 5, pp. 631-640. (EI)
  135. H.Y. Wang, K.C. Fan, J.K. Y, C.H. Lin (2013) “A Long-stroke Nano-positioning Control System of the Co-planar Stage,” IEEE/ASME Transactions on Mechatronics, accepted (SCI, in press)
  136. J. S. Torng, Z. N. Huang, C.H. Wang and K.C. Fan (2013) “A Novel Dual-axis Optoelectronic Level with Refraction Principle,” Measurement Science & Technology, Vol. 24, 035902, pp. 1-6. (SCI)
  137. K.C. Fan, K. Zhang, Y.L. Zhang and Q. Zhang (2013) “Development of a non-contact focusing probe for the measurement of micro cavities,” Int. J. of Automation Technology, Vol. 7, No. 2, pp. 156-162. (EI)
  138. K.C. Fan and M.W. Liang (2013) "Development of an automatic cumulative-lead error measurement system for ballscrew nuts," Int. J. of Advanced Manufacturing Technology, accepted (SCI)
  139. H.Y. Wang, K.C. Fan, J.K. Ye, C.H. Lin (2014) “A Long-stroke Nano-positioning Control System of the Co-planar Stage,” IEEE/ASME Transactions on Mechatronics, Vol. 19, No. 1, pp.248-356. (SCI, IF: 3.135, cited 1)
  140. R.J. Li, K.C. Fan, J.W. Miao, Q. X. Huang, S. Tao, E.M. Gong (2014) “An analogue contact probe using a compact 3D optical sensor for micro/nano CMM,” Measurement Science & Technology, Vol. 25, 064008, pp. 1-10. (SCI, IF: 1.435)
  141. K.C. Fan, N. Wang, C.W. Wang and H. Zhang (2014) "Development of a Roundness Measuring System for Micro Spheres," Measurement Science & Technology, Vol. 25, 064009, pp. 1-10. (SCI, IF: 1.435)
  142. K.C. Fan and M.W. Liang (2014) "Development of an automatic cumulative-lead error measurement system for ballscrew nuts," Int. J. of Advanced Manufacturing Technology, Vol. 72, pp. 17-23. (SCI, IF 1.458)
  143. K.C. Fan and W. Gao (2014), “Editorial”, Measurement Science & Technology, Vol. 25, 090301, 1 pp. (SCI, IF 1.435)
  144. K.C. Fan, H.Y. Wang, H.W. Yang and L.M. Chen (2014) “Techniques of multi-degree-of-freedom measurement on the linear motion error of precision machines,” Advanced Optical Technology, Vol. 3, No. 4, pp. 375-386. (Invited)
  145. H.L. Fu, K.C. Fan, Y.J. Huang and M.K. Hu (2014) “Innovative optical scanning technique and device for three-dimensional full-scale measurement of wind turbine blades,” Optical Engineering, Vol. 53, No. 12, 12211-1~6. (SCI, IF 0.958)
  146. K.C. Fan, H. Zhou, R.J. Li (2014) “Development of a high precision coplanar stage by using miniature Michelson interferometer,” IJPEM, Vol. 15, No. 11, pp. 2251-2256. (SCI, IF 1.500)
  147. J. Feng, R.J. Li, K.C. Fan, H. Zhou and H. Zhang (2015) “Development of a low-cost and vibration-free constant-temperature chamber for precision measurement,” Sensors and Materials, Vol. 4, pp. 329-340. (SCI, IF 0.461)
  148. K. Zhang, Q. Zhang, C.D. Lin and K.C. Fan (2015) “A Visual Non-contact Focusing Probe for the Measurement of Micro Cavities,” IJNM, accepted. (EI)

    Top

  • iconred會議論文:EI: 43
  1. J.T. Hong and K.C. Fan, 1986.06, "An Algorithm for Straightness Calculation from Geometrical Viewpoint", Proc. of the First ROC-ROK Metrology Standards Symposium, TAIWAN, p.89-94.           
  2. S.H. Chen, T.S. TSAI, and K.C. Fan, 1986.06, "Development of Automatically Real-Time Precision Measurement System for NC Machine Tools", Proc. of the First ROC-ROK Metrology Standards Symposium, TAIWAN.
  3. K.C., Fan, and M. Burdekin, 1986.06, "Straightness Error Analysis - An Introduction to MINMAX-1 Method", Proc. of the First ROC-ROK Metrology Standards Symposium, TAIWAN, P.103-110.           
  4. K.C. Fan, J.K. Wang, and M. Burdekin, 1986.06, "Development of a Computer-aided On-line Flatness Calibration System", Proc. of the First ROC-ROK Metrology Standards Symposium, TAIWAN, P.111-120.            
  5. K.C. Fan and M. Burdekin, 1986.09, "Development of a Computer Software Package for Positionary Accuracy Calibration and Analysis on NC Machine Tools", Proc. of 26th Int MTDRConf., England.           
  6. 范光照, 黃舉錐, 1987.04, "長直工件誤差檢測方法研究", 第一屆全國自動科技研討會論文集, 溪頭, p.681-685.           
  7. 黃舉錐, 范光照, 張子恕, 廖運炫, 1987.12, "數控車床加工直線誤差補償系統之發展", 中國機械工程學會第四屆學術研討會,新竹, p. 1079-1086.
  8. 張子恕, 范光照, 黃舉錐, 廖運炫,1987.12, "簡單、廉價、且具高可攜性之CNC 補償器之發展", 中國機械工程學會第四屆學術研討會, 新竹, p.1105-1111.
  9. K.C. Fan, Y.S. Liao, et al., 1988.04, "Development of a Simple, Low Cost, and Portable Compensator for CNC Controllers", Proc. of the 27th Int. MTDR Conf., England.
  10. 范光照, 陳純安,1988.04, "數控工具機定位精度自動化檢測系統的研製",第二屆全國自動化科技研討會, 墾丁.
  11. Y.S. Liao, K.C. Fan, et. al., 1988.04, "Development of a Workpiece Straightness Error Compensation System for NC Turning", Proc. of the 27th. Int. MTDR Conf. England.       
  12. K.C. Fan and C.L. TSAI, 1988.05, "Levelling Error Compensation for Roundness Test", Proc. of the Second ROC-ROK Metrology Standards Symposium, Korea.            
  13. 范光照, 陳純安, 呂秀雄 (1988.12), "多軸CNC工具機之體積誤差補償方法研究," 中國機械工程學會第五屆學術研討會論文集, 臺北, pp.753-762.            
  14. K.C. Fan, (1989.07), "Design of Positional Compensator for Multi-Axis NC Machine Tools," Proc. of the Int. AMSE Conf. on Signals & Systems, England.
  15. K.C. Fan, (1990.03),"In-Process Dimensional Control Techniques in NC Machining,"Proc. of 1990 NSC-DFG Joint Symposium on Precision and High Speed Manufacturing Technology, Taiwan, pp. 235- 242.           
  16. K.C. Fan and H.C. Wen, (1990.05), "Computer-Aided Calibration of the Surface Flatness of Gauge Blocks," Proc. of the 3rd ROC-ROK Metrology Symposium, Taiwan, pp.91-97.
  17. C.Y. Fang and K.C. Fan, (1990.05), "Development of Multi-Function Error Calibration System for NC Machine Tools," Proc. of the 3rd ROC-ROK Metrology Symposium, Taiwan, pp. 163-171.      
  18. K.C. Fan and T.S. Kuo, (1990.07), "Integration Study from CMM to CAD/CAM on a Microcomputer," Proc of the 1st Int. Conf. on Automation Technology, Taiwan, pp.487-494.
  19. K.C. Fan, L.C. Chen and C.S. Kuo,(1990.09), "A CAD-Assisted In-Cycle Gaging System," Proc. of IMT'90 Conf., MS90-330, USA.              
  20. K.C. Fan, (1990.12), "System Integration of CAI and CAD/CAM on a Microcomputer," Proc. of ROC-Japan Joint Symposium on Precision Measurement, Tokyo, Japan.       
  21. 范光照, 陳亮嘉, (1991.11), "電腦輔助加工中自動量測與誤差補償系統之研製," 中國機械工程學會第八屆學術研討會論文集, 臺北, pp.765-773.,
  22. K.C. Fan, J.F. Lin and S.S. Lu,(1992.04), "Measurement and Compensation of Thermal Error on a Machining Center," Proc. of the 29th Int. MATADOR Conf., England, pp.261-268.
  23. C.Y. Fang and K.C. Fan, (1992.05), "Development of a Software Package for On-Line Roughness Measurement," Proc. of the 4th ROC-ROK Metrology Symposium, Korea.
  24. K.C. Fan, L.C. Chen and S.S. Lu, (1992.07), "A CAD-directed In-Cycle Gaging system with Accuracy Enhancement by Error Compensation Scheme," Proc. of the 1992 Japan-USA Symposium on Flexible Automation, USA. (EI)
  25. C.Y. Fang and K.C. Fan, (1992.08), "Development of an On-Line Flatness Calibration Software," Proc. of the 8th Int. Conf. on CAD/CAM, Robatics and Factories of the Future, France.             
  26. 龍清勇, 范光照 (1992.11),"由二維工程視覺至三維線架構及面模型資料的自動建構系統," 中國機械工程學會第九屆學術研討會論文集.           
  27. 陳議雄, 范光照, 王海(1992.11) "車削加工中切削誤差量測與補償",中國機械工程學會第九屆全國學術研討會論文集, pp.515-520.             
  28. K.C. Fan, L.C. Chen and S.S. Lu (1993, 02) "A CAD/CAM Directed In-Cycle Gauging System," Proceedings of USA/ROC Joint Symposium on Advanced manufacturing Processes, Atlanta, USA.            
  29. C.H. Chu and K.C. Fan, (1993.07),"The Study of Reverse Process Method for Small Casting Parts," Proc. of the 6th National Conference on Automation Technology, Taichung, Taiwan, pp.525-531.          
  30. J.S. Torng and K.C. Fan, (1993.07) "Automatic Coordinate Alignment of Workpiece by Means of Image Processing Technique," Proc. of the 6th National Conference on Automation Technology, Taichung, Taiwan, pp.626-631.      
  31. K.C. Fan and S.S. Lu, (1993.10), "An Error Compensator for Precision NC Turning", Proc. of 1993 Sino-German Symposium on Precision and High Speed Manufacturing Technology, Taiwan, pp. 185-203.
  32. K.C. Fan and John H. Wu, (1993.11), "A Parallel Beam Scanning System for Flatness Measurement of Thin Plates", Proc. of the 2nd Int. ISMTII'93 Conf., SPIE, Vol. 2101, China Wuhan, pp.42-53. (EI)           
  33. K.C. Fan and K.P. Wen, (1993.11), "Non-contact Automatic Measurement of Free-form Surface Profiles", Proc. of the 2nd Int. ISMTII'93 Conf., SPIE, Vol. 2101, China Wuhan, pp.949-958.(EI, cited 3)            
  34. M.S. Chen, K.C. Fan, et al., (1993.12), "Image Measurement on Curved Surface Workpiece and CAD/CAM Module System Developed by Microcomputer", Proc. of the 10th National CSME Conf., Hsingchu.             
  35. K.C. Fan, et al., (1994.05),"Integration Study of Multi-axis Hybrid Measurement System," Proc. of the 3rd Conf. of Chinese Metrology Society, pp.73-93.             
  36. K.C. Fan, et al., (1994.05), "3-D Surface Profile Measurement Using Polarized Optical Heterodyne Double Loop Mach-Zehnder," Proc. of the 3rd Conf. of Chinese Metrology Society, Part B, pp.9-16.              
  37. K.C. Fan, et al., (1994.05), "Precision Positioning Detection Technique Using CCD," Proc. of the 3rd Conf. of Chinese Metrology Society, Part B,pp.43-50.             
  38. K.C. Fan, et al., (1994.11), "3D CAD/CAM Module System Developed by Microcomputer," Proc. of the 11th Conf. of CSME, pp.281-289.             
  39. 范光照, 陳茂盛(1994.12) "電腦輔助切削中自動量測與補償系統之整合研究",第十五屆近代工程技術研討會論文集, pp.39-62.             
  40. K.C. Fan and K.Y. Hung (1995) "Error Compensation of Spindle Expansion by Cutting Model on a Machining Center," Proc. of the 31st Int. MATADOR Conf., England, pp. 269-275             
  41. 范光照, 陳木榮(1995.05) "三維雷射追蹤量測儀的研製", 中華民國計量工程學會第四屆計量學術研討會論文集,pp. 73-80
  42. 周令宇, 范光照, 周晟, 章明 (1995.05), "CCD定位技術在多軸誤差檢測系統的應用",中華民國計量工程學會第四屆計量學術研討會論文集, pp.65-72.
  43. K.C. Fan (1995.05), "Design of In-process Dimensional Error Compensator for Precision NC Turning," Proc. of the 26 Seminar on Science & Technology, Symposium for Key Techniques in Precision Machine, Japan, pp. 18.1-18.10            
  44. 范光照, 溫光溥 (1995.08), "三次元量測儀多軸混成式量測系統的整合研究", 全國計量測試技術與儀器學術會議論文集,大陸哈爾濱市, 計畫編號: NSC-83-0416-E-002-024                             
  45. 范光照, 陳炳盛 (1996.05), "高精度三次元量測儀的設計分析", 國科會精密量測研究群成果發表會論文集, pp. 1-20.          
  46. 范光照,李吉群 (1996.05), "Range Image Segmentation of Mechanical Parts by Locating Critical Points of One Dimensional Curves," 國科會精密量測研究群成果發表會論文集, pp. 21- 33.
  47. 林正道, 范光照, 陳建宏 (1996.05), "自動聚焦型光學精密探頭的應用", 國科會精密量測研究群成果發表會論文集, pp. 71- 79.
  48. 周晟, 周令宇, 范光照 (1996.05), "CCD定位技術在多軸誤差檢測系統的應用",國科會精密量測研究群成果發表會論文集,pp. 88-102.            
  49. K.C. Fan and M.C. Leu, (1996.07), "CAD-Directed Inspection Planning for Coordinate Measurement Machines," Proc. of the Int. Conf. of Automation'96, Hsingchu, Taiwan.
  50. K.C. Fan, M.J. Chen, and W.M. Huang, (1996.10) "Development of a Six-degree-of-freedom Error Measurement System for the Accuracy Calibration of Machine Tools and CMMs," Proc. of the Int. Conf. of ISMTII'96, Hayama, Japan, pp. 72-78.
  51. 范光照, 李吉群 (1996.11), “ 以彈性位能最小化原理評估最小區間真球度之研究”,中國機械工程學會第十三屆學術研討會論文集, pp. 322-328.
  52. 范光照, 周暉凱 (1996.11), “ 加工曲面形狀誤差分析”, 中國機械工程學會十三屆學術研討會論文集, pp. 515-522.
  53. 陳燕鴻, 范光照, 林顯昌 (1996.11), “三維曲面加工路徑最佳化處理之研究”,中國機械工程學會第十三屆學術研討會論文集,pp.550-566.
  54. K.C. Fan, X.J. Zhu and D.G. Qu, (1997.08), ”Design and Analysis of a High Precision Ring Bridge CMM,” Keynote Paper, Proc. of the APSI’97, Huangshan, China, pp. 1-5. 
  55. Q. Zhang, K.C. Fan, et al., (1997.08), “Development of Straightness Error Measurement System with Non-diffraction Beam,” Proc. of the APSI’97, Huangshan, China, pp. 133-136.
  56. Q. Zhang, K.C. Fan, et al., (1997.08), “The Calculation Method for Evaluating Spatial Straightness Errors by Computer,” Proc. of the APSI’97, Huangshan, China, pp.229-233.    
  57. 范光照, 陳彥華 (1997.10), “砂輪磨耗影像檢測法研究,” 第八屆全國自動化科技研討會論文集, 台中, pp.777-784.
  58. 范光照, 何昭慶(1997.10), “三維影像曲面量測疊合技術研究,” 第八屆全國自動化科技研討會論文集, 台中, pp.785-792.
  59. K.C. Fan and M.J. Chen, (1997.11), “Development of a Six-degree-of-freedom Measurement System for the Accuracy of X-Y Stages,” Proc. of the ICPE’97, Taipei, ROC, pp.737-742.            
  60. K.C. Fan and J.C. Lee, (1997.11), “A Theoretical Derivation of Minimum Potential Energy Analogy of Minimum Zone Spherical Form Error,” Proc. of the ICPE’97, Taipei, ROC, pp. 755-760.     
  61. 范光照等人, (1997.11), “三次元座標量床精度自校程序之建立,” 第二屆海峽兩岸計量科技學術研討會論文集, 台北, pp. 57-72.  
  62. 范光照等人, (1997.11), “雨量儀集雨口校正系統之研製,” 第二屆海峽兩岸計量科技學術研討會論文集, 台北, pp.175-186
  63. 范光照, 何秋誼 (1997.12), “三次元量測儀精度校正系統的研究,” 中國機械工程學會第十四屆學術研討會論文集, pp. 207-214.
  64. 范光照, 黃偉明 (1997.12) “精密曲面加工與機上量測系統的研製,” 中國機械工程學會第十四屆學術研討會論文集, pp. 238- 245.         
  65. 范光照, (1997.12), “精密平台六自由度誤差量測,” Invited Paper, 中國機械工程學會第十四屆學術研討會論文集, pp. 314-319.
  66. K.C.  Fan, C.Y. Lin and L.H. Shyu (1998.07),“Position Error Compensation of a Precision Microstage,” Proc. of the 5th Int. Conf. on Automation Technology, Taipei, Taiwan, ROC.
  67. K.C.Fan (1998.08),“On-Machine Measurement and Error Compensation System for Precision Machining of Free-form Surfaces,” Proc. of the Pacific conference on Manufacturing, Brisbane Australia. 
  68. Q.Zhang, K.C. Fan and Z. Li (1998.09),“A Study on Straightness Error Precision Measurement with Non-diffraction Beam,” Proc. of the 6th ISMQC IMEKO Symp. Wine Austria.
  69. Zhao and K.C. Fan (1998.09),“A laser Alignment System Using Optical Fiber and Modulation Techniques,” Proc. of the 6th ISMQC IMEKO Symp. Wine, Austria.
  70. Q. Zhang, K.C. Fan and Z. Li(1998.09),“Method for Cylindrcity Error Evaluation based on Minimum Zone Condition,” Proc. of the ISMTII'98, Hungary.
  71. K.C. Fan and Y. Zhao (1998.09), “A laser Sraightness Measurement System Using Optical Fiber and Modulation Techniques,” Proc. of the ISMTII'98, Hungary. 
  72. 范光照, 蔡東憲(1999.05)"量測曲線和曲面的形狀誤差分析,"中華民國計量工程學會第六屆計量學術研討會論文集,新竹, pp. 139-150.
  73. K.C. Fan (1999.06),"Integration of on-machine measurement, error compensation, and grinding systems for precision machine," Keynote paper, Proc. of the ICAMT'98, Xi An, China. 
  74. 范光照, 蔡東憲(1999.07),"曲面影像疊合最佳化形狀誤差分析,"第九屆全國自動化科技研討會論文集,嘉義, pp.785-792.
  75. K.C. Fan, C.Y. Lin and L.H. Shyu (1999.08),"Development of a low-cost focusing probe for profile measurement," Proc. of the Int. ISIST'99, Luoyang, China.
  76. K.C. Fan, M.J. Chen (1999, 08),"A measurement system for the geometric accuracy of X-Y stages in 6 d-o-f," Keynote paper, Proc. of the Int. ISIST'99, Luoyang, China.
  77. K.C. Fan, S.H. Chang and T.T. Chung (1999.10), "Design Principles of developing a Micro-CMM," Feature Seminars (專題講座), The 5th Int. Conf. on Manufacturing Technology, Beijing, China.
  78. 范光照、林威自、徐力弘 (1999.12), "超精密雷射自動聚焦探頭及系統之研製," 中國機械工程學會第十六屆學術研討會論文集, pp. 314-319.
  79. 范光照、邱亦鈞 (1999.12), "國產平面磨床熱變形量測與補償," 中國機械工程學會第十六屆學術研討會論文集,
  80. 范光照、張所鈜、顏家鈺、鍾添東 (2000.01) "高精密機械定位平台之研製," 第一屆海峽兩岸製造技術研討會論文集, 台灣 台北, pp. 15-23.
  81. 楊宏智、范光照 (2000.01) "精密磨床熱誤差分析與補償," 第一屆海峽兩岸製造技術研討會論文集, 台灣 台北, pp. 232-240.
  82. K.C. Fan and C.L. Chu (2000.05), "Developing of a DSP Based Framework for Intelligent Instrumentation," Proc. of the 6th Int. Conf. on Automation Technology, Taipei, Taiwan, ROC.
  83. K.C. Fan and L.Z. Meng (2000.07), "A Fast and Low-cost Machine Tool Thermal Error Compensation System for Industrial Use," Proc. of the 33rd Int. MATADOR Conference, UMIST, England.
  84. K.C. Fan, W. J. Lin, S. Chen and J. H. Ho, (2000.09)“An Autofocusing Probe for Profile Measurement,” IMEKO 2000 Int. Measurement Confederation, Vienna, Austria.
  85. K.C. Fan and T. H. Tsai (2000.12), “Error Analysis and Adjustment Procedures of a 360-degree Optical Profile Measurement System,” Proc. of the 5th International Conf. On Industrial Engineering, Hsin Chu, Taiwan.
  86. 范光照、朱志良、廖展漣 (2001.05), “精密雷射準直儀之研製”, 第十屆全國自動化科技研討會論文集,虎尾, 4204A-7.
  87. K.C. Fan, C.L. Chu, S.H. Chang and T.T. Chung (2001.05), “Development of a Micro-CMM for Nanometrology,” Keynote Paper, Proceedings of the Spring Conference, KSPE, Korea, pp. 3-7.
  88. 范光照、龍清勇、賴信焜、廖偉博(2001.08)" 粉末冶金業電子化生產資訊管理系統建置," 2001海峽兩岸粉末冶金技術研討會論文集,台灣 苗栗,pp.73-81.
  89. 范光照、朱志良、林威自 (2001.09), “超精密光學聚焦探頭之研製”, 第二屆海峽兩岸製造技術研討會論文集, 大連 大陸, pp.136-145.
  90. 范光照、張振龍 (2001.12), “360度立體快速量測系統與寬頻的應用”, 中華民國第二十五屆全國力學會議論文集, 台灣 台中, pp. 2613-2624.
  91. Fan, K.C., (2001.12) “Development of a Low-Cost Autofocusing Probe from DVD Pickup Head for Profile Measurement,” Proceedings of the 6th ICMT, Hong Kong.
  92. 范光照、藍啟峰 , (2001.11), "以FPGA發展電子細分割及其於光柵干涉儀之應用", 2001年精密機械製造學術研討會論文集, 台灣 台北, pp 161-165
  93. 范光照、王海、趙俊偉、張燦輝 (2001.12), “虛軸工具機機構誤差補償研究”, 中國機械工程學會第十八屆學術研討會論文集, 台北
  94. Fan, K.C., (2002.02) “An Intelligent Thermal Error Compensator for CNC Machine Tools,” Proceedings of the First International Manufacturing Leader’s Conference, Adelaide, Australia.
  95. Lung, C.Y. and Fan, K.C. (2002, 08) “Automatic Optical Inspection on Porosity Powder Metallurgy Products,” Proceedings of ISPMM, Hefei, China, pp. 142-147. (cited: 1)
  96. Wang, H. and K.C. Fan (2002.08) “A Novel 3D Laser Ball Bar for machine tools calibration,” Invited Paper, Proceedings of ISIST, Jinan, China, pp. 2-230. (EI)
  97. Chang, S. H. and Fan, K. C. (2002.08) " MOE Sponsored Education Resource Center for Enhancement of University-Level Precision Measurement Technique in Taiwan,” proceedings of the 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-Yi, Taiwan, August 11-14, 2002. (EI)
  98. Fan, K.C. and Zhang Hei (2002.10) “A High Precision Diffraction-Interferometry Stylus Profiling System,” Keynote paper, Proc. of the 6th ICMT, Kitakyushi, Japan, pp. 33-38.
  99. 范光照、劉建宏(2002.11),"光學影像檢測模組之開發與應用",SME國際製造工程學會九十一年度精密製造研討會論文集, 台灣 台北, pp. 164-172.
  100. 范光照, 朱志良, 陳柏廷(2002.11), “超精密光學自動聚焦探頭之研製,” 中國機械工程學會第十九屆學術研討會論文集, 台灣 虎尾, C3404E-11.
  101. 范光照, 朱志良, 陳柏廷(2002.12), “光學自動聚焦探頭之非線性系統研究,” 中華民國力學學會第二十六屆學術研討會論文集, 台灣 虎尾, C3406O-1.
  102. 范光照 (2003.11), “ 關鍵性微/奈米技術於公開關系統與元件的發展,” 第三屆精密製造研討會論文集,  pp.329-332, 高雄 台灣.
  103. 朱志良, 范光照, 簡揚昌 (2003.11), “壓電長行程定位平台驅動控制器之研製,” 第三屆精密製造研討會論文集,  pp.329-332, 高雄 台灣.
  104. 張所鋐、范光照、楊宗翰 (2003.11), “精密檢測技術教學資源中心之產學合作教育模式,” 第三屆精密製造研討會論文集, (B06-09),高雄 台灣.
  105. Wang, Hai and K.C. Fan (2003.12), “Identification of Mechanism Errors of a 3-PRS Serial-Parallel machine Tool,” proceedings of the 7th ICMT, Taipei, Taiwan.
  106. 范光照、陳彥宏 (2003.12), “彩色機械視覺於表面瑕疵檢測的研究,” 中國機械工程學會第十九屆學術研討會論文集, 台灣 台北
  107. K.C. Fan and Y.J Chen, (2003.11) “A Study on the Mechanism of a New High-Speed Scanning Miniature Nano-Measurement Probe,” Proceedings of the 6th ISMTII, Hong Kong.
  108. Chen, L.C., S.H. Tsai and K.C. Fan, (2003.11) “An Innovative Three-dimensional Profilometer for Surface Profile Measurement Using Digital Fringe Projection and Phase Shifting,” Proceedings of the 6th ISMTII, Hong Kong.
  109. 范光照、宋欣明 (2004.6) “微機械元件三維輪廓自動化檢測系統之開發研究,” 第十三屆全國自動化科技研討會論文集,台北, pp. 863-870.
  110. Fan, K.C., Wang, H., Shiou, F.J., Ke, C.W., “Development of a 3D laser ball bar for the volumetric error measurement of multi-axis machines,” 31st NAMRC, Canada, pp. 249-256, 2003. (EI)
  111. 林武郎、李臻誠、范光照、鍾添東 (2004.6), “關鍵性微奈\米技術於光開闢系統與元件之研究,” 第十三屆全國自動化科技研討會論文集,台北, pp.1090-1097.
  112. Chu, C. L., K. C. Fan, and Y. J. Chen (2004.6), “ Design of a digital controller for long-stroke submicron positioning stage,” Proc. Of the 1st ICPT, Hamamatsu, Japan.
  113. Fan, K. C. and H. Wang (2004.7), “A Novel 3D laser Ball Bar for the Accuracy Assessment of Multi-axis machine Tools,” Proc. of the 34th International MATADOR Conference, Manchester, UK, pp. 283-288.
  114. Fan, K.C., Fei, Y.T. and Yu, X.F., (2004.11) “A Micro-CMM for Non-contact 3D Measurement in Meso Scale,” Proc. of ICMT2004, Keynote paper, Nov. 3~6, Hanoi, Vietnam.
  115. Kuang-Chao Fan, and Wang Weili (2004.6), “The design of a coplanar precision XY-stage”, Proc.of the 6th International Conference on Frontiers of Design and Manufacturing (ICFDM), June 21-23, 2004, Xi’an China.
  116. Kuang-Chao Fan, Wang Weili, and Cheng Fang (2004.8), “Innovative design of a new CMM structure”, Proc. Of the International Symposium of Mechanical Measurement (ISPMM2004), August 24~28, Beijing, China.
  117. Fan Kuang-chao, Chen Ye-jin, and Cheng Fang (2004.8), “A Study on Digital Subdivision of Linear Optical Encoder for Nanopositioning”, Proc.of the ISIST’2004, XI’AN, China.
  118. Fan Kuang-chao, Chen Ye-jin, Cheng Fang, 2004, “A Study on Nano positioning and feedback control system in large-scale ,” Proc. of the International Symposium of Mechanical Measurement (ISPMM2004), August 24~28, Beijing, China.
  119. Zhang Hui, Zhang Yu, Zhao Sheng, Fan Kuang-Chao, (2004.08), “The High Precision Temperature Measurement System Based on ADS1243”, Proc. of the International Symposium of Mechanical Measurement (ISPMM2004), August 24~28, Beijing, China.
  120. Hong, J., Kong, L.X., Hsu, H.Y., Lin, G., and Fan, K.C. (2004.08) ”Concept designs of tactile probe tips for down scaled 3D CMM,” Proc. of the International Symposium of Mechanical Measurement (ISPMM2004), August 24~28, Beijing, China, pp. 65~67.
  121. Fan, K.C. et al, (2004.11), “A Micro-CMM for Non-contact 3D Measurement in Meso Scale,” Keynote paper, Proc. of the ICMT 2004, Nov. 8-12, Hanoi, Vietnam.
  122. 范光照、葉易霖 (2004.11), “白光干涉垂直掃描之研究,” 中國機械工程學會第二十一屆學術研討會論文集, 台灣 高雄, D0700361.
  123. H. Ji, L.X. Kong, H.Y.Hsu, W.C. Zhang and G. Lin, KC. Fan , “Tip models of a novel touch trigger probe for nano CMMs,”PCMM’2004 Eight International Conference on Manufacuring & ManagemAug. Dec.8~10, 2004, Brisbane, Australia, p. 69~75. 
  124. Fan, K.C., Fei, Y.T. and Yu, X.F. (2005.3) “Development of a Micro-CMM,” Proc. of the IMLF, Adelaide, Australia, paper code IMATW02.
  125. Fan, K.C., Lin, W.L., Chung, T.T., Wang, H.Y., and Wu, L. P. (2005.05) “Micro/Nano 1x2 Mechanical Optical Switch,” Proc. of 2nd Int’l Conference on Precision Machines, Kending, Taiwan, 
  126. Kuang-Chao Fan, Ruijun Li, Hsin-Ming Song, Koung-Ming Yeh (2005. 7) “Fiber Image Technique in Stereomicroscope,” Proc. of IEEE ICM/HIMA, Taipei, Taiwan, pp. 295-300. (EI)
  127. Wang Weili, Fan Kuangchao and Wang Hongtao (2005.06) “New Design of Precision Positioning XY-stage”, the 6th International Symposium on Test and Measurement (ISTM/2005), June1~4, Dalian, China Vol. 5, p. 4799-4802. (ISTP).
  128. Chen, L.C., Fan, K.C., C. D. Lin, Chang, C.C., Kao, C. F., Chou, J.T., “3-D surface profilometry for both static and dynamic nano-scale full field characterization of AFM micro cantilever beams,” Proc. SPIE, Vol. 5878, Article no. 587804, Aug. 2005. (EI, cited: 6)
  129. H. Ji, H.Y.Hsu, J. Chu, L.X.Kong, B. Wedding, G.C.I Lin and K.C.Fan (2005.12), “Fabrication of Integrated Optic Fibre Tip for Micron CMMs Touch Trigger Probe Application,” SPIE Microelectronics, MEMS, and Nanotechnology Brisbane, Australia Dec.12-15, Brisbane, Australia, Vol.6035, paper No. 5. (EI, cited 1))
  130. H. Ji, L.X.Kong, H.Y.Hsu, B. Wedding, M. She, G.C.I Lin and K.C.Fan (2005.12), “Concept Design of a novel tactile probe tip for down scaled 3D CMMs,” SPIE Microelectronics, MEMS, and Nanotechnology Brisbane, Australia Dec.12-15, Brisbane, Australia, Vol.6037, paper No. 28. (EI)
  131. Yejin Chen, K.C. Fan, Yusheng Liu, Fang Cheng, “A High precision focus probe for the quality assessment of grating pitch,” Proceedings of ASPEN’2005, Shengzheng, China, Vol. 1, 2005, p. 374-378.
  132. 范光照、林武郎、姜禮宏、郭文正,微/奈米創新型1x4機械式光開關,中國機械工程學會第二十二屆全國學術研討會論文集,Nov 25-26,2005,E04-019,第609-613頁,中壢、台灣
  133.  Kuang-Chao Fan, Wu-Lang Lin, Hung-Yu Wang, “The Development of Automatic Light Tracing Alignment Technique for a 1×2 Mechanical Optical Switch”,9th International Conference on Mechatronics Technology, ICMT-171, Dec. 5-8, 2005, Kuala Lumpur, Malaysia.
  134. K. C. Fan, H. Y. Hsu, Patrick Hong, “Feasibility Study of the Formation of Micro Spherical Probes with Optical Fibbers”, 9th International Conference on Mechatronics Technology, Dec. 5-8, 2005, Kuala Lumpur, Malaysia.
  135.  范光照、宋欣明、葉光明,影像光纖立體顯微術研製,AOI Forum & Show 2005,中壢,台灣
  136.  Wang Wei-li, Fei Ye-tai, Fan Kuang-chao, “Investigation of Nanometer X-Y Positioning Stage,” 2006 IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Jan.18-21, 2006, (EI, Cited: 1).
  137.  范光照, 陳智遠, 王興華, 潘文珏,” 壓電式液滴產生器之研製,” 自動化科技研討會, June 2, 2006, 彰化 (The Best Paper Award)
  138. 范光照、劉一正、朱志良,"音圈馬達於主動振動隔振器之應用",第14屆中華民國振動與噪音工程學術研討會,pp. A13~A17,2006
  139.  Liang-Chia Chen, Yao-Ting Huang, Kuang-Chao Fan, Calvin C. Chang, Ching-Fen Kao, “Automatic Resonant Mode Detection and Nano-scale 3-D Surface Profilometry for Dynamic Full-Field Characterization of MEMS,” Proceedings of the 7th International Conference on Frontiers of Design and Manufacturing, Guangzhou, China, from 19 to 22 June 2006
  140. K.C. Fan, Y.S. Liu, Y.J. Chen and F. Cheng, “A linear diffraction grating interferometer with high accuracy,” Proc. of 3rd ISPMM, Proc. SPIE v 62801, art no. 628008, 2006 (EI, cited 6)
  141. Zhang, H., Wang, J. and Fan, K.C., “Numerical study on cold transfer characteristics of the space in a semiconductor refrigeration device,” Prof. SPIE 6280 II, art. No. 62803Y, 2006. (EI, Cited: 2)
  142.  Jun-Wei Zhao, K.C. Fan, J.J. Huang and X. Fang, “A model method for parameter calibration of the 3-PRS parallel spindle platform of a serial-parallel type machine tool,” Proc. of the 3rd IMLF, Paper No. H18-CN-FP106, Oct. 23-24, 2006, Taipei, Taiwan.
  143.  C.H. Cheng, M.T. Yen, K.C. Fan et al., “Characterization of pressure sensitive rubber for artificial skin of robotics,” Proc. of the 3rd IMLF, Paper No. 009-TW-FP116, Oct. 23-24, 2006, Taipei, Taiwan.
  144.  M.Y. Cheng, W.Y. Chang, K.C. Fan, et al., “Integrated temperature and tactile sensing arrays on a flexible substrate,” Proc. of the 3rd IMLF, Paper No. H31-TW-FP130, Oct. 23-24, 2006, Taipei, Taiwan.
  145. Chu, C.-L., Lin, C.-H., Fan, K.-C., “Development of a two-dimensional optical accelerometer using a DVD pick-up head,” Proc. of SPIE, 62801, art no 628008, 2006. (EI)
  146. 范光照 林武郎 姜禮宏 陳守恒 鍾添東, “薄膜反射式小尺寸,低成本與高可靠度之2×2機械式光開關,”第五屆精密製造學術研討會, Nov.11, 2006.
  147.  Kuang-Chao Fan, Jhih-Yuan Chen, Ching-Hua Wang, Wen-Chueh Pan, “Development of a droplet generator actuated by piezoelectric buzzer,” Proc. of the 10th ICMT, Nov. 21-24, 2006, Mexico city, Mexico.
  148. 范光照, 洪柏元, “微奈米級三次元量測探頭之研製,”中國機械工程學會第二十三屆全國學術研討會論文集, Nov. 24-25, 2006, 昆山科技大學, 高雄, 台灣
  149.  范光照, 張培恩, “以DLP發展光纖立體顯微量測系統之研究,”中國機械工程學會第二十三屆全國學術研討會論文集, Nov. 24-25, 2006, 昆山科技大學, 高雄, 台灣
  150. 范光照、王祥名, “小型分離式恆溫箱之研究”中國機械工程學會第二十三屆全國學術研討會論文集, Nov. 24-25, 2006, 昆山科技大學, 高雄, 台灣.
  151.  Ji, H., Wedding, A.B., Kong, L.X., Hsu, H.Y., Lin, G.C.I., Fan, K.C.,” Calibration of wavelength shift for a fibre bragg grating using a single mode laser source,” Proceedings of SPIE Volume 6414, 2007, Article number64141P. (EI)
  152. Ji, H., Kong. L.X., Hsu, H.Y., Wedding, A.B., Lin, C.I., Fan, K.C.,” Concept design of a novel tactile tip for down scaled 3D CMM,” Proc. SPIE 6037, art. No. 60370Q, 2006 (EI).
  153. Ji, H., Hsu, H.Y., Chau, J. Kong, L.X., Wedding, A.B., She, M., Lin, G.C.I., Fan, K.C., “Fabrication of integrated optic fibre tip for micro CMM touch probe application,” Proc. SPIE 6035, art. No. 603505, 2006 (EI, Cited: 1)
  154. K.C. Fan, G. Jager, Y. J. Chen, R. Mastylo, “Development of a non-contact optical focus probe with nanometer accuracy,” Proc. of the 7th International Conference of EUSPEN, May 20-24, 2007, Bremen, Germany, pp. 278-281.
  155. K. C. Fan, C. L. Liu, P. T. Wu, Y. C. Chen and W. L. Wang, “The structure design of a micro-CMM with Abbé principle,“ Proc. of the 35th International Matador Conf. July 18-20, 2007, Taipei, Taiwan, pp. 297-300.
  156. Fan, K.C., Chen, Y.J. and Wang, W.L., “Probe technologies for micro/nano measurement,” In Proc. of IEEE-Nano, Hong Kong, August 2007, pp. 989-993. (EI, Cited: 1)
  157. Chia, B. T., Cahng, D. R., Fan, K.C. et al., “Development of artificial sensor array system,” Proc. ISMTII, Sendai, Japan Sept. 2007, Paper No. 1-10-3.
  158. Wang, F.C., Lin, H. M., Fan K.C., et al., “Signal detection and control of an intelligent robot,“ Proc. ISMTII, Sendai, Japan Sept. 2007, Paper No. 1-10-4.
  159. Chang, M.Y., Chang, W.Y., Fan, K.C., et al., “A large area temperature and tactile sensing array,“  Proc. ISMTII, Sendai, Japan Sept. 2007, Paper No. 1-10-1.
  160. Tsao, L.C., Chang, D.R., Shih, W.P. and Fan, K.C., “Fabrication and characterization od electro-active polymer for flexible tactile sensing array,” Proc. of ISMTII, Sendai, Japan Sept. 2007, Paper No. 1-10-2.
  161.  Liu, Y.C., Fan, K.C., Chiu, C.L. et al., “Development of an optical accelerometer for low frequency vibration using DVD pickup head,” Proc. of ISMTII, Sendai, Japan Sept. 2007, Paper No. 1-10-7.
  162.  Cheng, M.-Y.http://www.scopus.com/static/images/s.gif , Chang, W.-Y., Tsao, L.-C., Yang, S.-A., Yang, Y.-J., Shih, W.-P., Chang, F.-Y., Chang, S.-H., Fan, K.-C., “Design and fabrication of an artificial skin using PI-copper films,” 20th IEEE International Conference on Micro Electro Mechanical Systems, MEMS, Proc. IEEE, art no 4433149, pp. 389-392, 2007.(EI, Cited: 6)
  163.  Chia, B.T. , Chang, D.-R., Liao, H.-H., Yang, Y.-J., Shih, W.-P., Chang, F.-Y., Fan, K.-C., “Temperature sensor array using flexible substrate,”  20th IEEE International Conference on Micro Electro Mechanical Systems, MEMS, Proc. IEEE, art no 44332989, pp. 589-592, 2007. (EI, cited: 2))
  164. Tsao, L.-C., Cheng, M.-Y., Chen, L-L., Shih, W.-P., Yang, Y.-J., Chang, F.-Y., Fan, K.-C., Chang, S.-H., “Flexible temperature sensor array using electro-resistive polmer for humanoid artificial skin,” 4th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS '07, 2007, Article number4300626, Pages 2287-2290.
  165. Zhang, H., Cai. Z. and Fan, K.C., “The development of a separate mini-environment,” Proc. of ISMTII, Sendai, Japan Sept. 2007, Paper No. PS2-2-7.
  166. 范光照, 陳柏伸, 陳智遠, “光纖共焦顯微術之研製,” AOI Forum, Oct. 9, 2007, Paper No. 42, 新竹, 台灣
  167. Fan, K.C., Chen, J.Y., Chen, S.H. and Liao, W.B., “Development of auto defect classification system on porosity powder metallurgy products,” Proc. of ICMT, Ulsan, Korea, Nov. 2007, Paper No. AC025.
  168. Fan, K.C., Chen, S.H., Chung,  T.T. and Yang, Y.J., “A novel architecture 4x4 mechanical optical switch,” Proc. of ICMT, Ulsan, Korea, Nov. 2007, Paper No. AC024.
  169. Fan, K.C. and Zi-Fa Lai, “An intelligent nano-positioning control system driven by ultrasonic motor,” Proc. ASPEN, Gwangju, Korea, Nov. 2007, Paper No. TC2-2.
  170. 劉一正, 范光照, 朱志良, “低成本之主動式振動隔振系統之研製,” 第16屆全國自動化研討會論文集, 高雄, 台灣, June 2008.
  171. Wang, W.L., Fan, K.C., “Development of a touch trigger probe for micro/nano CMM,” Proc. ISPMM, Paper No. D2-1, Hefei, China, Aug. 2008, Proc. of SPIE 7130, art. No. 71300K, 2008 (EI, Cited: 1).
  172.  Cheng, F., Fei, Y.-T., Fan, K.-C., “New method on real-time signal correction and subdivision for grating-based nanometrology,” 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems;Chengdu;19 November 2008. SPIE vol. 7284, article no. 728403, 2009 (EI, Cited: 1)
  173. Cheng, F., Fan, K.C. and Fei. Y.T., “A Robust control scheme of nanopositioning drive by ultrasonic motor,” Proc. ISPMM, Paper No. D2-1, Hefei, China, Aug. 2008, Proc. of SPIE 7130, art. No. 71301O, 2008 (EI, Cited: 3).
  174.  Fan, K.C., J.Y. Ke and B. K. Li, “Design of a Novel Low-cost and Long-stroke Co-planar Stage for Nanopositioning,” Invited Paper, Proc. of ICPM, Ilmenau, Germany, Sept. 8-12, 2008.
  175.  Fan, K.C., Li, B.K. and Liu, C.H., “A diffraction grating scale for long range and  nanometer resolution,” Proc. of the 5th ISIST, Shenyang, China, pp. 1133-1140, 2008, Proc. of SPIE Vol. 7133 71334J, 2009 (EI, Cited: 3).
  176.  Fan, K.C., Liu, Y.C. and Chu, C.L., “Development of a low cost active vibration isolation system,” Proc. of the 12th ICMT, Sudbury, Canada, Oct. 14-17, 2008.
  177.  Chung, T.T., Lin, C.T., Lee, C.Y., Fan, K.C. and Chen, S.H, “Design and analysis of an 8x8 optical switch,” Proc. of the 12th ICMT, Sudbury, Canada, Oct. 14-17, 2008.
  178. 李學賢, 范光照, 黃光國, “射出機導柱生產效率提昇之研究,”第六屆全國精密製造研討會論文集, Paper No. A-1, 台南, 台灣, November 2008.
  179.  Fan, K.C., Fang, C., Wang, W., Chen, Y.J. and Lin, J.Y., “A scanning contact probe for micro CMM,” Proc. of the 9th ISMTII, Saint-Petersburg, Russia, June 28- July 2, 2009. (Keynote paper)
  180.  Fan, K.C., Chou, R.C. and Chen, C.W., “An Optical System for the Measurement of Scraped Surface,” Proc. of the 13th ICMT, Cebu, Philippines, Oct. 21-24, 2009.
  181.  Fan, K.C., Chen, S.H. and Chang, T., “A health monitoring system for exercise machines with RFID technology,” Proc. of the 13th ICMT, Cebu, Philippines, Oct. 21-24, 2009.
  182. Fang, C., Fan, K.C. and Fei, Y.T., “An Improved Design of the Linear Diffraction Grating    Interferometer,” Proc. of the 3rd ASPEN, Kyushu, Japan, Nov. 11-13, 2009.
  183. Fan, K.C., Chen, S.M. and Kuo, T.S., “Analysis and Prediction of Machine Tool Slideway Wear,” Proc. of the 3rd ASPEN, Kyushu, Japan, Nov. 11-13, 2009.
  184. 范光照, 陳希銘, 林昇宜, “光電水平儀,” 中國機械工程學會第二十六屆全國學術研討會論文集, Nov. 20-21, 2009, 成功大學, 台南, 台灣.
  185. Fan, KC. Chen, LC, Huang, SY, Lin, HY and Chen, LS, “A new chromatic confocal microscope for in-situ full-field micro structure measurements,” Proc. of ICAM2010 Conference, Kenting, Taiwan, 2-5 Feb. 2010.
  186. Kuang-Chao Fan, Fang-Jung Shiou, Kai-Ming Pan, Zhi-Yuan Ke, Yjng-Jhih Lin, and Kun-Jin Wu, “Design of a Meso-scale 3-axis Milling Machine with Nanometer Accuracy”, Proceedings of the 36th International MATADOR Conference, University of Manchester, Manchester, UK, 13-16th July 2010. (Invited) (EI)
  187. Fan, K.C., Chen, S.M and Lin, S.Y, “Development of a Small 3-axis Angular Sensor for Real-time Abbé Error Compensation on Numerically Controlled Machine Tools,” Proc. Of 36th MATADOR Conference, University of Manchester, Manchester, UK, 13-16th July 2010. (EI)
  188. Tien-Tung Chung, Chih-Hsiang Chu, Kuang-Chao Fan, Jia-Yush Yen, and Kou-I Szu,    "Development of a nano-positioning planar motion stage,"  paper ID: M076, 2010 the 2nd international Conference on Mechanical and Electronics Engineering(ICMEE 2010), Kyoto, Japan. August 1-3, 2010. (EI)
  189. Tien-Tung Chung, Yu-Chu Huang, Chia-Hung Ma, Kuang-Chao Fan, Chih-Dean Tsai, and Kuang-Pu Wen, "Optimum Design of A High Precision AOI Machine Structure,"  paper ID: M083, 2010 the 2nd international Conference on Mechanical and Electronics Engineering(ICMEE 2010), Kyoto, Japan. August 1-3, 2010. (EI)
  190. Fan, K.C. and Cheng, F., “LDGI signal subdivision by soft computing for nanomeasurement,” Proc. on ISPEMI, Hangzhou, China, 7-10 Aug. 2010. Proc. SPIE v 7544, art no. 75440I, 2010 (EI).
  191. Tien-Tung Chung, Chin-Te Lin, Shou-Heng Chen, Hsun-Fu Chian, Kuang-Chao Fan, "DESIGN AND VERIFICATION OF BONDING MODULE FOR LARGE-SCALE PCB BONDER," paper ID: 095, 2010 the 10th International Symposium on Measurement and Quality Control(ISMQC 2010), Osaka University, Osaka, Japan, September 5-9, 2010.
  192. Kuang-Chao Fan, Fang Cheng, Bor-Cheng Lee, Yi-Cheng Chung, "Waveform Subdivision Technique of Linear Scale for Nanomeasurement," paper ID: B17, 2010 Conference on Society of Manufacturing Engineers (SME 2010), Taipei, Taiwan, November 6, 2010.
  193. 梁敏威、范光照,”滾珠螺帽動態導程檢測中偏擺誤差消減方法,” 第七屆全國精密製造研討會論文集,Nov 06,2010,No. C1,pp. 1-6.
  194. Fang-Jung Shiou, Kuang-Chao Fan, Kai-Ming Pan, Zhi-Yuan Ke, and Kun-Jin Wu, “Development of a meso-scale machine tool and the preliminary cutting tests using a polycrystalline diamond tool”, Proc. of the 14th Int. Conference on Mechatronics Technology (ICMT 2010), Osaka University, Osaka, Japan, 24-26th November 2010.
  195. 范光照、林昇宜、王綜漢、安乃駿, “雙軸光電水平儀研製,” 中國機械工程學會第二十七屆全國學術研討會論文集,Dec 10-11,2010,DD09-014.
  196. K.C. Fan and F. Cheng, “High-resolution Angle Measurement based on Michelson Interferometry,” Proc. of ICOPEN2011, Singapore, 23~25 March 2011. (EI)
  197. Y.C. Chung, K.C. Fan and B.C. Lee, “Development of a novel planar encoder for 2D displacement in nanometric resolution and accuracy,” Proc. of WCICA2011, Taiwan, June 21~25. Paper no. PID1723643. (invited session) (EI)
  198. T.T. Chung, C.H. Chu, H.F. Chian, C. Huang, K.C. Fan, J.Y. Yen, K.I. Szu, “Structural design and analysis of a nano-positioning planar motion stage,” Prof. of WCICA2011, Taiwan, June 21-25, pp. 833-838, 2011. (EI)
  199. K.C. Fan, H.Y. Wang and J.K. Ye, “Contouring error compensation on a micro coordinate measuring machine,” Proc. of ISPEMI 2011, Lijiang, China, Aug. 7~8, 2011, IA-1. Proc. SPIE, vol. 8321, art no. 83213I, 2011 (EI)
  200. F. Cheng, D. Buttler and K.C. Fan, “Measurement of microchannels inside transparent substrate based on confocal microscopy,” Proc. of ISPEMI 2011, Lijiang, China, Aug. 7~8, 2011; Proc. of SPIE, Vol. 8321, article no. 83212D, 2011. (EI)
  201. R. J. Li, K.C. Fan, S. Tao, J.Z. Qian, Q. X. Huang, F. Cheng, “Design of an analog contact probe for nano-CMM,” Proc. of ISPEMI 2011, Lijiang, China, Aug. 7~8, 2011, IB-3. Proc. of SPIE, v.8321, art no. 832114, 2011 (EI)
  202. K.C. Fan, J.W. Miao, W. Gong, Y.L. Zhang and F. Cheng, “High precision measuring system based on coplanar XY-stage of nano-CMM,” Proc. of ISPEMI 2011, Lijiang, China, Aug. 7~8, 2011, IB-6. Proc. SPIE, vol. 8321, art no. 832119, 2011 (EI)
  203. K.C. Fan, T.H. Wang, S.Y. Lin and Y.C. Liu, “Development of a dual-axis optoelectronic precision level,” Proc. of ISPEMI 2011, Lijiang, China, Aug. 7~8, 2011, IIB-6. Proc. SPIE, vol. 8321, art no. 83213H, 2011 (EI).
  204. M.W. Liang and K.C. Fan, “Development of an automatic cumulative-lead error measurement system for ballscrew nuts,” Invited paper and Best paper award, Proc. of 4th ASPEN, Hong Kong, Nov. 16~18, 2011.
  205. K.C. Fan, B.H. Liao and J.W. Miao, “Design Analysis of Linear Diffraction Grating Interferometers with High Alignment Tolerance,” Proc. of 11th ICAT, Yunlin, Taiwan, Nov. 18~20, 2011.
  206. C.L. Chu, Y.F. Jheng and K.C. Fan, “Development of a Three-dimensional Measurement System with Focus Laser Probe and Two-dimensional Image Measurement Functions,” Proc. of 11th ICAT, Yunlin, Taiwan, Nov. 18~20, 2011.
  207. F.J. Shiou, K.C. Fan and K.M. Pan, “Fabrication of Micro-V-Grooves with a Single Crystal Diamond Tool on A Meso-Scale Machine Tool,” Proc. of 11th ICAT, Yunlin, Taiwan, Nov. 18~20, 2011.
  208. K.C. Fan, Y.C. Chung, F. Cheng and T.H. Wang,” A Miniature Three-angle Sensor for the Accuracy Improvement of Machine Tools,” Proc. ICMT2011, Melbourne, Australia, Nov. 29 to Dec. 2, 2011.
  209. 范光照、王志雄、陳希銘、劉彥志, “直線度量測誤差之探討,” 中國機械工程學會第二十八屆全國學術研討會論文集, D03-017, Dec 10-11, 2011.
  210. K.C. Fan, H.Y. Wang, J.K. Ye, and C.H. Lin, "Development of an Ultra Precision Motion Control System on a Micro-CMM," The 11th International Conference on Automation Technology, Nov 18-20, 2011, D3-C017.
  211. K.C. Fan, B.H. Liao, “Ultra-precision angle sensor based on Michelson interferometry,” Proc. of ICAM, Jiaoxi, Taiwan, March 4-8, 2012.
  212. K.C. Fan, B.H. Liao, Y.C. Chung, T. T. Chung, “Displacement measurement of planar stage by diffraction planar encoder in nanometer resolution,” Proc. IEEE I2MTC, Graz, Austria, May 13-16, 2012, pp. 894-897. (EI)
  213. K.C. Fan, Y.L. Zhang, J.W. Miao and F. Cheng, “Error compensation of grating interferometer due to angular error of linear stage,” Proc. IEEE/ASME Inte’l Conf. on AIM, Kaohsiung, Taiwan, July 12-14, 2012. (EI)
  214. K.C. Fan, T.H. wang, C.H. Wang and H.M. Chen, “Development of an Abbe error compensator for NC machine tools,” Proc. 37th MATADOR Conf., Manchester, England, July 25-27, 2012. (EI) (Best paper award)
  215. R.J. Li, K.C. Fan, S. Tao, “Analysis of an elastic mechanism for contact scanning probe,” Proc. ISPEMI2012, Chengdu, China, Aug. 9-11, 2012. (EI)
  216. A.W. Wang, R.J. Li, W. Gong and K.C. Fan, “Experimental study on fabricating micro monolithic tungsten probing ball for Micro-CMM,” Proc. ISPEMI2012, Chengdu, China, Aug. 9-11, 2012. (EI)
  217. C.M. Huang, B.H. Liao and K.C. Fan, “A contact probe using Michelson interferometer for CMM,” Proc. ISPEMI2012, Chengdu, China, Aug. 9-11, 2012. (EI)
  218. J.S. Torng, K.K. Maung and K.C. Fan, “An automated optical inspection system for cell phone panels,” Proc. IEEE ISR 2012, Taipei, Taiwan, Aug. 29-31, 2012. (EI)
  219. K. Zhang, K.C. Fan, R.J. Li, S. Tao and Q. Zhang, “A blue-ray DVD pick-up based non-contact trigger probe for micro/nano CMM,” Proc. MACE 2012 Conf. Baoto, China, July 27-29, 2012. (EI)
  220. K.C. Fan, F. Cheng, “Correction of quadrature fringe measurement errors in interferometers,” Proc. of PTW, Hsinchu, Taiwan, Oct. 3, 2012. (Invited paper)
  221. K.C. Fan, K. Zheng, Y.L. Zhang, Q. Zhang, “Development of a low-cost focusing probe for edge detection of micro holes,” Proc. of ICMT, Tianjin, China, Oct. 16-19, 2012.
  222. H.Y. Wang, C.H. Lin, C.M. Huang and K.C. Fan, “Development of a micro coordinate measuring machine precision calibration and scanning measurement”, Proc. of the 20th National Conf. on Automation Technology, Taipei, Taiwan, Nov. 1-2, 2012. (Best paper award)
  223. K.C. Fan, H.Y. Wang, C.H. Lin, B.H. Liao, “Development of a high precision co-planar stage with a multi-degree-of-freedom sensor,” Proc. of IFToMM Asian-MMS, No. 63, Tokyo, Japan, Nov. 7-9, 2012. (Best paper award)
  224. J.S. Torng, Z.Y. Ke, K.C. Fan, “Development of a nanoscale height gauge,” Proc. of IFToMM Asian-MMS, No. 53, Tokyo, Japan, Nov. 7-9, 2012.
  225. K.C. Fan, “Abbe error compensation in positioning stages,” Proc. of ICPT, Kaohsiung, Taiwan, Nov. 14-16, 2012. (keynote paper)
  226. K.C. Fan, Z.W. Wang, N. Wang, H. Zhang, “Roundness measurement of micro spheres,” Proc. of ISMTII, Aachen, Germany, July 1-5, 2013. (Invited paper)
  227. R.J. Li, K.C. Fan, H. Zhou, N. wang and Q.X. Huang, “Elastic mechanism design of the CMM contact probe,” Proc. of 6th ISPMM, Guiyang, China, August 6-8, Proc. of SPIE Vol. 8916. 89160P, 2013. (EI)
  228. Z.W. Wang, K.C. Fan, R.J. Li, W. Gong, “Experimental Study on Fabricating Micro Monolithic Tungsten Probing Ball for Micro-CMM,” Proc. of 8th ISPEMI, Chengdu, China. Proc. of SPIE, Vol. 8759, 8759E, 2013. (EI)
  229. H.Y. Wang, B.H. Liao, M.J. Chou, Y.Y. Tseng and K.C. Fan, “Development of a miniature multi-degree-of freedom measuring system for ultra precision stages,” Proc. of 6th ISPMM, Guiyang, China, August 6-8, Proc. of SPIE Vol. 89160A, 2013. (EI)
  230. R.J. Li, K.C. Fan, Q.X. Huang, S. Tao, R.M. Gong, X.L. Wu, “A scanning contact probe for CMM,” Proc. of 17th ICMT, Jeju, Korea, October 15-17, 2013.
  231. K.C. Fan, Z.N. Huang and K.Y. Li, “Real-time compensation of Abbe error on machine tools,” Proc. of 17th ICMT, Jeju, Korea, October 15-17, pp. 67-70, 2013. (Best paper award)
  232. K. Zhang, Q. Zhang and K.C. Fan, “Development of a visual non-contact focusing probe for edge detection of micro cavities,” Proc. of ASPEN2013, Taipei, Taiwan, Nov. 12-15, 2013, paper number 1017.
  233. R.J. Li, K.C. Fan, J/E. Miao, Q.X. Huang, S. Tao, E.M. Gong, “An analog contact probe using a compact optical sensor for CMM,” Proc. of ASPEN2013, Taipei, Taiwan, Nov. 12-15, 2013, paper number1031.
  234. Q. Zhang, Y.L. Zhang K.C. Fan, “Software development for the motion control of a high precision coplanar stage,” Proc. of ASPEN2013, Taipei, Taiwan, Nov. 12-15, 2013, paper number 1018.
  235. 曾揚喻,陳立民,楊皓偉, 范光照,”雷射自動穩定功率電路,” 中國機械工程學會第三十屆全國學術研討會論文集, D03-017, Dec 6-7, 2013.
  236. 范光照,顏翰銘, 楊世將, “精密定位機台精度檢測與調校,” 第十屆全國精密製造研討會論文集,Nov 22,2013.
  237. K.C. Fan, H.Y. Wang, M. J. Zhou, S.H. Hsu, “Development of an Abbé Error Compensation for Micro-Coordinate Measuring Machine,” The 12th International Conference on Automation Technology, Yong-Kang, Tainan, Taiwan, Nov. 1-3, 2013.
  238. K.C. Fan and L. C. Chen, “Measurement of microstructures to super resolution by focus probe,” Laser Optics 2014, St. Petersburg, Russia, June 30-July 4, 2014. (invited paper)
  239. R.J. Li, M. Xiang, K.C. Fan, H. Zhou, J. Feng, “Analysis and optimal design of a touch trigger probe,” Proc. of ISPEMI2014, Changsha, Hunan, China, Aug. 8~13, 2014.
  240. K.C. Fan, H.Y. Wang, S.H. Hsu and L.M. Chen, “Development of a high precision co-planar XY stage with multi-degree-of-freedom sensing system,” 11th LMPMI, Tsukuba, Japan, Sept. 2-5, 2014.
  241. K.C. Fan, H.M. Yen and K.Y. Li, “A new concept of volumetric error analysis of machine tools based on Abbe principle,” ICDES 2014, Pilsen, Czech Republic, Sept. 1-3, 2014. (Best paper award)
  242. K.C. Fan, S.H. Hsu and H. Zhao, “Self-volumetric error compensation of a micro-CMM,” 58th IWK, Ilmenau, Germany, Sept. 8-12, 2014.
  243. 范光照, “精密定位床台精度調校技術,”11屆兩岸三地製造技術研討會, 銀川, 大陸, Sept. 24-28, 2014. (Invited paper)
  244. Y.T. Li, W.P. Sun, K.C. Fan, “Measurement of tilt error and eccentric error of rotary stage,” iCAM 2014, Chiayi, Taiwan, Sept. 30-Oct. 3, 2014. (Best paper award)
  245. K.C. Fan, “精密定位床台精度調校技術,” PTW 2014, Hsinchu, Taiwan, Oct. 3, 2014. (Invited paper).
  246. J. Feng, K.C. Fan, R.J. Li, H. Zhou and H. Zhang, “Development of a low cost and vibration free constant temperature chamber for measuring instruments,” 18th ICMT, Taipei, Taiwan, Oct. 21-24, 2014.
  247. 陳立民, 范光照, 周浩, “高精度即時波長補正二極體雷射干涉儀之開發,”2015兩岸量測與檢測科技學術研討會, March 20-21, 中壢, 台灣, 2015.
  248. 馮建, 李瑞君, 范光照, “微納米測量用高精度恒溫箱研製,” 2015兩岸量測與檢測科技學術研討會, March 20-21, 中壢, 台灣, 2015.
  249. Y-T. Li and K-C. Fan, “A Novel Method of Rotational Error Analysis of Rotary Stages Based on Abbe Principle,” Proc. 38th MATADOR Conf., Huwei, Taiwan, March 30-April 1, pp. 497-500, 2015.
  250. M. Xian, R.J. Li, K-C. Fan and Y.X. He, “Development of a touch-trigger probe,” Proc. 38th MATADOR Conf., Huwei, Taiwan, March 30-April 1, pp. 467-470,  2015.
  251. L.M. Chen, K-C. Fan and H. Zhou, “A Novel Miniature Laser Diode Interferometer for Precision Displacement Measurements,” Proc. 38th MATADOR Conf., Huwei, Taiwan, March 30-April 1, pp. 355-358, 2015

    Top