首頁 > 系所成員 > 本系教授 >廖運炫教授 返回首頁連絡我們


姓名Name 廖運炫 Yunn-Shiuan Liao
職稱Title 終身特聘教授 Distinguished Professor
辦公室Office 609, 611
電話Phone 23626431,33662711
傳真Fax 2363-1755
電子郵件E-mail liaoys@ntu.edu.tw
個人網頁Homepage  
實驗室Lab 切削加工實驗室
自傳
Short Biography
美國威斯康辛大學 機械工程博士 1980
Mechanical Engineering Ph.D. University of Wisconsin-Madison

美國威斯康辛大學 機械工程碩士 1976
Mechanical Engineering Master University of Wisconsin-Madison

臺灣大學 機械工程學士 1973
Mechanical Engineering Bachelor National Taiwan University
研究領域
Research Interests
切削原理、非傳統加工、工具機動態分析與控制、品質管制與可靠度
Metal cutting principles, Non-traditional machining process, Machine tool dynamics and control, Quality control and reliability
教學課程
Teaching Courses

切削原理 Principles of machining
機械製造 Manufacturing processes
製造原理 Principles of manufacturing
工具機動態分析與控制 Machine tool dynamics and control
精密加工技術概論 Introduction to precision maching

研究計劃
Research Projects
過去五年總計畫經費 NT$36,748,300

Research Projects: Total fund in the past five years: NT$36,748,300
1. 線切割放電加工精度 - 鼓形量改善之研究(2/3),主持人,計畫期間:08/08/01~09/07/31,委任單位:國科會。
Study to improve the drum factor in WEDM, PI, Project period: 08/08/01~09/07/31, Organization: NSC.
2. 微放電加工機高效能與高精度化技術之研究(3/3),主持人,計畫期間:08/08/01~09/07/31,委任單位:國科會。
Study of the technologies to improve the efficiency and accuracy of micro EDM machine (3/3), PI, Project period: 08/08/01~09/07/31, Organization: NSC.
3. 精細線切割放電加工線系統及穿線機構可靠度研究, 主持人,計畫期間:08/04/01~08/11/30,委任單位:工研院機械所。
Study of wire system and the reliability of wire threading mechanism of fine wire EDM, PI, Project period: 08/04/01~08/11/30, Organization: MIRL/ITRI.
4. CBN刀具車削V溝於高硬度合金鋼之製程改善研究,主持人,計畫期間:08/05/01~08/07/31,委任單位:奇菱科技公司。
Study of the process improvement of turning V-groove on high hardness alloy steel by CBN tool, 08/05/01~08/07/31, Organization: Chi Lin Technology Co., Ltd.
5. CBN與陶瓷刀具於車削高硬度合金鋼之可行性研究,主持人,計畫期間:07/12/01~07/12/31,委任單位:奇菱科技公司。
Feasibility study of turning high hardness alloy steels by CBN and ceramic tools, PI, Project period: 07/12/01~07/12/31, Organization: Chi Lin Technology Co., Ltd.
6. 次世代CMP鑽石碟製程技術之開發研究(台灣大學促進產學合作先導型計畫),主持人,計畫期間:07/01/01~08/07/31,委任單位:台灣大學、中國砂輪公司。
Research and development of next generation CMP diamond dresser, PI, Project period: 07/01/01~08/07/31, Organization: National Taiwan University & Kinik Company.
7. 玻璃基板劃線切割加工技術之研究,共同主持人,計畫期間:07/03/01~08/02/28,委任單位:友達光電公司。
Study of flat panel glass scribing technology, Co-PI, Project period: 07/03/01~08/02/28, Organization: AU Optronics Corp.
8. 大尺寸增亮膜之微細溝槽滾筒加工技術,主持人,計畫期間:07/08/01~08/07/31,委任單位:奇美電子公司。
Machining technology of micro groove on the large diameter drum for the large size brightness enhancement film, PI, Project period: 07/08/01~08/07/31, Organization: Chi Mei Technology Co., Ltd.
9. 線切割放電加工精度 - 鼓形量改善之研究(1/3),主持人,計畫期間:07/08/01~08/07/31,委任單位:國科會。
Study to improve the drum factor in WEDM, PI, Project period: 07/08/01~08/07/31, Organization: NSC.
10. 微放電加工機高效能與高精度化技術之研究(2/3),主持人,計畫期間:07/08/01~08/07/31,委任單位:國科會。
Study of the technologies to improve the efficiency and accuracy of micro EDM machine (2/3), PI, Project period: 07/08/01~08/07/31, Organization: NSC.
11. 微細加工機系統之研發,主持人,計畫期間:06/11/01~07/10/31,委任單位:上銀科技股份有限公司。
Research and development of a micro machining system, PI, Project period: 06/11/01~07/10/31, Organization: Hiwin Microsystem Corp.
12. 多工型臥式高精密微小4軸CNC 加工機之研發及其應用(3/3):總計畫,主持人,計畫期間:06/08/01~07/07/31,委任單位:國科會。
Development and application of the multi-functions high accuracy horizontal 4-axes CNC machine (3/3): Main project, PI, Project period: 06/08/01~07/07/31, Organization: NSC.
13. 多工型臥式高精密微小4軸CNC 加工機之研發及其應用(3/3):子計畫一:微奈米加工技術研發,主持人,計畫期間:06/08/01~07/07/31,委任單位:國科會。
Development and application of the multi-functions high accuracy horizontal 4-axes CNC machine (3/3): Sub-project 1 – Research of micro/nano machining technologies, PI, Project period: 06/08/01~07/07/31, Organization: NSC.
14. 微放電加工機高效能與高精度化技術之研究(1/3) ,主持人,計畫期間:06/08/01~07/07/31,委任單位:國科會。
Study of the technologies to improve the efficiency and accuracy of micro EDM machine (2/3), PI, Project period: 06/08/01~07/07/31, Organization: NSC.
15. 單晶、超硬材料之非球面超精密光學模仁加工合作計畫,主持人,計畫期間:06/01/01~07/12/31,委任單位:中國砂輪企業股份有限公司。
Ultra-machining of aspheric optics mold on single crystal and super-hard materials, PI, Project period: 06/01/01~07/12/31, Organization: Kinik Company.
16. 大尺寸增亮膜之微細溝槽滾筒加工技術,主持人,計畫期間:06/01/16~07/01/15,委任單位:奇美電子公司。
Machining technology of micro groove on the large diameter drum for the large size brightness enhancement film, PI, Project period: 06/01/16~07/01/15, Organization: Chi Mei Technology Co., Ltd.
17. 多工型臥式高精密微小4軸CNC 加工機之研發及其應用(2/3):總計畫,主持人,計畫期間:05/08/01~06/07/31,委任單位:國科會。
Development and application of the multi-functions high accuracy horizontal 4-axes CNC machine (2/3): Main project, PI, Project period: 05/08/01~06/07/31, Organization: NSC.
18. 多工型臥式高精密微小4軸CNC 加工機之研發及其應用(2/3):子計畫一:微奈米加工技術發,主持人,計畫期間:05/08/01~06/07/31,委任單位:國科會。
Development and application of the multi-functions high accuracy horizontal 4-axes CNC machine (2/3): Sub-project 1 – Research of micro/nano machining technologies, PI, Project period: 05/08/01~06/07/31, Organization: NSC.
19. 多工型精密微放電創成加工機之研發與相關製程技術之研究(3/3) ,主持人,計畫期間:05/08/01~06/07/31,委任單位:國科會。
Development of a multi-functions precision micro EDM generating machine and research of related process technologies (3/3), PI, Project period: 05/08/01~06/07/31, Organization: NSC.
20. 快速原型之多種材質成型方法及其嵌入式製程研發,共同主持人,計畫期間:05/08/01~06/07/31,委任單位:國科會。
Study of the multi-materials rapid prototyping process with embedded functional parts, Co-PI, Project period: 05/08/01~06/07/31, Organization: NSC.
21. 光硬化樹酯型快速原型之嵌入式製程研究,共同主持人,計畫期間:05/05/01~06/04/31,委任單位:國科會。
Study of the SLA-embedded RP process, Co-PI, Project period: 05/05/01~06/04/31, Organization: NSC.
22. 多元高功能合金切削性能研究,主持人,計畫期間:05/04/01~05/11/30,委任單位:工研院材料所。
Study of the machinability of high-entropy alloys, PI, Project period: 05/04/01~05/11/30, Organization: MRL/ITRI.
23. 高效能切削加工研究,主持人,計畫期間:05/04/01~05/11/30,委任單位:工研院機械所。
Study of high efficiency machining, PI, Project period: 05/04/01~05/11/30, Organization: MIRL/ITRI.
24. 拋光墊表面形貌效應於化學機械拋光之研究,主持人,計畫期間:05/03/01~07/02/28,委任單位:中國砂輪企業股份有限公司。
Study of the effects of the pad surface textures on the Chemical Mechanical Polishing (CMP) process, PI, Project period: 05/03/01~07/02/28, Organization: Kinik Company.
25. 線切割放電加工機自動穿線系統開發,主持人,計畫期間:04/11/01~05/10/31,委任單位:國科會、聯盛機電公司。
Development of an automatic wire threading system for Wire-EDM machines, PI, Project period: 04/11/01~05/10/31, Organization: NSC & Lien Sheng Mechanical & Electrical Co., Ltd.
26. 多工型臥式高精密微小4軸CNC 加工機之研發及其應用(1/3):總計畫,主持人,計畫期間:04/08/01~05/07/31,委任單位:國科會。
Development and application of the multi-functions high accuracy horizontal 4-axes CNC machine (1/3): Main project, PI, Project period: 04/08/01~05/07/31, Organization: NSC.
27. 多工型臥式高精密微小4軸CNC 加工機之研發及其應用(1/3):子計畫一:微奈米加工技術發,主持人,計畫期間:04/08/01~05/07/31,委任單位:國科會。
Development and application of the multi-functions high accuracy horizontal 4-axes CNC machine (1/3): Sub-project 1 – Research of micro/nano machining technologies, PI, Project period: 04/08/01~05/07/31, Organization: NSC.
28. 多工型精密微放電創成加工機之研發與相關製程技術之研究(2/3) ,主持人,計畫期間:04/08/01~05/07/31,委任單位:國科會。
Development of a multi-functions precision micro EDM generating machine and research of related process technologies (2/3), PI, Project period: 04/08/01~05/07/31, Organization: NSC.
29. 快速原型之新式薄片成型法之線上製作複雜件製程研發,共同主持人,計畫期間:04/08/01~05/07/31,委任單位:國科會。
Study of a new LOM process for the on-line fabrication of complicated parts, Co-PI, Project period: 04/08/01~05/07/31, Organization: NSC.
30. 多元高功能合金切削性能研究,主持人,計畫期間:04/04/01~04/11/30,委任單位:工研院材料所。
Study of the machinability of high-entropy alloys, PI, Project period: 04/04/01~04/11/30, Organization: MRL/ITRI.
31. 放電加工理論分析推導及模糊控制應用之研究,主持人,計畫期間:04/04/01~04/11/30,委任單位:財團法人精密機械研究發展中心。
Study of EDM theory analyses, deriving and fuzzy control application, PI, Project period: 04/04/01~04/11/30, Organization: Precision Machinery Research & Development Center (PMC).
32. 乾式切削加工之研究,主持人,計畫期間:04/03/01~04/11/30,委任單位:工研院機械所。
Study of dry cutting, PI, Project period: 04/03/01~04/11/30, Organization: MIRL/ITRI.
33. 拋光墊表面形貌效應於化學機械拋光之研究,主持人,計畫期間:03/11/01~04/10/31,委任單位:中國砂輪企業股份有限公司。
Study of the effects of the pad surface textures on the Chemical Mechanical Polishing (CMP) process, PI, Project period: 03/11/01~04/10/31, Organization: Kinik Company.
34. 多工型精密微放電創成加工機之研發與相關製程技術之研究(1/3) ,主持人,計畫期間:03/08/01~04/07/31,委任單位:國科會。
Development of a multi-functions precision micro EDM generating machine and research of related process technologies (1/3), PI, Project period: 03/08/01~04/07/31, Organization: NSC.
35. 精密線切割放電加工之研究(1/3),主持人,計畫期間:03/08/01~04/07/31,委任單位:國科會。
Research of the precision Wire-EDM, PI, Project period: 03/08/01~04/07/31, Organization: NSC.
36. 金屬薄殼快速模具技術之研究,主持人,計畫期間:04/06/01~05/05/31,委任單位:國科會、歐燦科技有限公司。
Study of metal shell rapid tooling, PI, Project period: 04/06/01~05/05/31, Organization: NSC & Oriental Institute of Technology.
37. 應用人工智慧面積估測技術於形雕放電加工開發指導,主持人,計畫期間:03/05/01~05/02/28,委任單位:億曜企業企業股份有限公司。
Application of artificial intelligence in the estimation of discharging area in die sinking EDM, PI, Project period: 03/05/01~05/02/28, Organization: Yiawjet Enterprises, Co., Ltd.
38. 線型工具機高效率加工技術研究,主持人,計畫期間:03/04/01~05/01/31,委任單位:東台精機、永進機械、台灣麗偉、毅強企業、高峰工業、大立機械、主新德精機、慶鴻機電、台灣引興等公司。
Study of high efficiency machining technology of linear motor machine tool, PI, Project period: 03/04/01~05/01/31, Organization: Fong-Tai Machine & Tool Co., Ltd., Yeong Chin Machinery Industries Co., Ltd., Leadwell CNC Machines MFG., Corp., Istrong Systems Co., Ltd., Kao Fong Machinery Co., Ltd., Dah Lih Machinery Industrial Co., Ltd., Supertec Machinery Inc., Chin Hung Machinery Co., Ltd., Keyarrow (Taiwan) Co., Ltd.
研究著作
Publications
期刊論文 (Journal Papers):(2003.1.1~2008.12.31期間內正式刊登)

1. M.Y. Tsai, Y.S. Liao, “Dressing Characteristics of Oriented Single Diamond on CMP Polyurethane Pad,” Machining Science and Technology (in press) (SCI)
2. Y.S. Liao and L.C. Chen, “A Method to Create Holes or Grooves on Brittle Material by Powder Blasting Process,” Journal of Materials Processing Technology (in press). (SCI)
3. Y. S. Liao, G. M. Yang, Y. S. Hsu, 2009, “Effect of Geometrical Characteristics of a Scribing Wheel on the Bending Strength of LCD Glass Substrates,” Journal of the SID, 17/3, pp. 287-291. (SCI)
4. Y.S. Liao, M.P. Cheng and K.W. Liao, 2008, “An On-Line Pulse Trains Analysis System of the Wire-EDM Process,” Journal of Materials Processing Technology, doi:10.1016/j.jmatprotex.2008.10.015 (SCI)
5. Y.S. Liao, T.Y. Chang, and T.J. Chuang, 2008, “An On-line Monitoring System for Micro Electrical Discharging Machining (Micro-EDM) Process,” Journal of Micromechanics and Microengineering, 18, doi:10.1088/0960-1317/18/035009. (SCI)
6. T. W. Lin, C.F. Chen, J.J. Yang, Y.S. Liao, 2008, “A Dual-directional Light-control Film with a High-Sag and High-Asymmetrical-Shape Microlens Array Fabricated by a UV Imprinting Process,” Journal of Micromechanics and Microengineering, 18, doi:10.1088/0960-1317/18/9/095029 (SCI)
7. S.T. Chen, H.C. Su, Y.S. Liao, H.Y. Yang, Y.C. Tsai, 2008, “Development of Super High Slenderness Ratio Micro Channels using Precision Filled Wax Electroforming,” Journal of the Chinese Society of Mechanical Engineering, Vol. 29, No. 4, pp. 317-323. (SCI)
8. F.H. Liu, Y.S. Liao, 2008, “Formability of the Layer Additive Ceramic Part,” Materials Science Forum, Vol. 594, pp. 241-248. (EI)
9. Y.S. Liao and C.T. Chiou, 2008, “Robust Optimum Designs of Fiber-reinforced Composites with Design-variable and Non-design-variable Uncertainties,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 222, pp. 111-121. (SCI)
10. C.L. Tsai and Y.S. Liao, 2008, “Prediction of Cutting Forces in Ball-end Milling by means of Geometric Analysis,” Journal of Materials Processing Technology, 205, pp. 24-33. (SCI).
11. Y.S. Liao, H.M. Lin, 2008, “Behaviors of End Milling of Inconel 718 Superalloy by Cemented Carbide Tools,” Journal of Materials Processing Technology, Vol. 201, pp. 460-465. (SCI)
12. H.M. Lin, Y.S. Liao, and C.C. Wei, 2008, “Wear Behavior in Turning High Hardness Alloy Steel by CBN Tool, Wear, 264, pp. 679-684. (SCI)
13. F.H. Liu, and Y.S. Liao, 2008, “A Rapid Prototyping Apparatus for Forming Ceramic Parts,” Key Engineering Materials, Vols. 464-466, pp. 383-388. (EI)
14. S.W. Chyuan, Y.S. Liao and J.T. Chen, 2008, “Efficient Techniques for BEM Rank-deficiency Electrostatic Problems,” Journal of Electrostatics, 66, pp.8-15. (SCI)
15. J.J. Yang, Y.S. Liao and C.F. Chen, 2008, “Diffractive Beam splitting Microlens for Fiber Coupling Fabricated by UV Imprinting Process”, Optics Communications, 281, pp. 474-479. (SCI)
16. Y.S. Liao and Y.C. Chen, H.M. Lin, 2007, “Feasibility Study of the Ultrasonic Vibration Assisted Drilling of Inconel 718 Superalloy,” International Journal of Machine Tools and Manufacture Vol. 47(12), pp. 1988-1996. (SCI)
17. Y.S. Liao and H.M. Lin, 2007, “Mechanism of Minimum Quantity Lubrication in High Speed Milling of Hardened Steel,” International Journal of Machine Tools and Manufacture, Vol. 47(11), pp. 1660-1666. (SCI)
18. Y.S. Liao and H.M. Lin, 2007, “Feasibility Study of the Minimum Quantity Lubrication in High Speed End Milling of NAK80 Hardened Steel by Coated Carbide Tool,” International Journal of Machine Tools and Manufacture, Vol. 47(11), pp. 1667-1676. (SCI)
19. Y.S. Liao, H.C. Li and M.T. Chen, 2007, “The Study of Rapid Prototyping Process with Embedded Functional Parts,” Journal of Materials Processing Technology, Vols. 192-193, pp. 68-74. (SCI)
20. M.F. Hsieh, C.J. Tung, W.S. Yao, M.C. Wu and Y.S. Liao, 2007, “Servo Design of a Vertical Axis Drive Using Dual Linear Motors for High Speed Electric Discharge Machining,” International Journal of Machine Tools and Manufacture, Vo. 47(3-4), pp. 546-554. (SCI)
21. Y.S. Liao, M.Y. Tsai, J.C. Sung, Y.L. Pai, 2007, “Single Diamond Dressing Characteristics of CMP Polyurethane Pad,” Key Engineering Materials, Vol. 329, pp. 151-156. (EI)
22. J.J. Yang, Y.S. Liao and C.F. Chen, 2007, “Fabrication of Long Hexagonal Micro-lens Array by Applying Gray-Scale Lithography in Micro-Replication Process, Optics Communications, 270, pp. 433-440. (SCI)
23. W.M. Lee and Y.S. Liao, 2007, “Adaptive Control of the WEDM Process Using a Self-Tuning Fuzzy Logic Algorithm with Grey Prediction,” International Journal of Advanced Manufacturing Technology, Vol. 34, pp. 527-537. (SCI)
24. Y.S. Liao, S.T. Chen and P.Y. Shih, 2006, “Development of an On-Machine Micro Measuring Technique,” Journal of the Chinese Society of Mechanical Engineers, Vol. 27, No. 5, pp. 599-604. (SCI)
25. Y.S. Liao and C.T. Chiou, 2006, “Robust Optimum Designs of Fiber-reinforced Composites Using Constraints with Sensitivity,” Journal of Composite Materials, Vol. 40, No. 22, pp. 2067-2081. (SCI)
26. Y.S. Liao and L.C. Chen, 2006, “Determination of Mask Opening Size in Creating Fluid Hole on Brittle Material by Double-Side Sand Blasting,” International Journal of Advanced Manufacturing Technology, Vol. 29, pp. 511-517. (SCI)
27. J.J. Yang, Y.S. Liao and C.F. Chen, 2006, “Eight-Phase-Level Diffractive Microlens for Beam Splitting Using LIGA-Like Process,” Japanese Journal of Applied Physics, Vol. 45, No. 4A, pp.2817-2823. (SCI)
28. J.S. Kuo, K.T. Chiu, S.W. Hsu, P,H. Chen and Y.S. Liao, 2006, “A Novel Technique for fabrication of Herringbone Grooves in Dynamic Thrust Bearing Combining UV-LIGA with Electro-Discharge Machining,” Microsystem Technologies, 12(6), pp.529-536. (SCI)
29. Y.S. Liao H.C. Li and Y.Y. Chiu, 2006, “Study of the Heating-And-Pressing Separation Process of Laminated Object Manufacturing (LOM),” International Journal of Advanced Manufacturing Technology, 27, pp. 703-707. (SCI)
30. Y.C. Chen, Y.S. Liao and J.D. Fan, 2006, “Autoresonant Tuning and Control in Ultrasonic Vibration Assisted Drilling Process,” Materials Science Forum, Vol. 5067, pp. 823-828. (EI)
31. Y.S. Liao and W.Y. Peng, 2006, “Study of Hole-Machining on Pyrex Wafer by Electrochemical Discharge Machining,” Materials Science Forum, Vol. 507, pp. 1207-1212. (EI)
32. C. H. Lin, Y.S. Liao and S.T. Chen, 2006, “Development of A Novel Micro Wire-EDM Mechanism for the Fabricating of Micro Parts,” Materials Science Forum, Vol. 505, pp. 235-240. (EI)
33. Y.T. Chen, K. Naessew, R. Baets, Y.S. Liao and A. A. Tseng, 2005, “Ablation of Transparent Materials Using Excimer Lasers for Photonic Applications,” Optical Review, Vol. 12, No. 6, pp. 427-441. (SCI)
34. Y.S. Liao and Y.T. Chen, 2005, “Precision Fabrication of an Arrayed Micro Metal Probe by the Laser-LIGA Process,” Journal of Micromechanics and Microengineering, 15 (11), pp. 2433-2440. (SCI)
35. Y.S. Liao, S.T. Chen and C.S. Lin, 2005, “Fabrication of High Aspect Ratio Microstructure Array by Micro Reverse Wire-EDM,” Journal of Micromechanics and Microengineering, 15 (8), pp. 1547-1555. (SCI)
36. Y.S. Liao, Y.T. Chen, C.L. Chao and Y.M. Liu, 2005, “Surface Morphology and Sub-surface Damaged Layer of Various Glasses Machined by 193nm ArF Excimer Laser,” Proc. of SPIE, Vol. 5715, pp. 110-117. (EI)
37. S.W. Chyuan, Y.S. Liao and J.T. Chen, 2005, “Computational Study of the Effect of Finger Width and Aspect Ratios for the Electrostatic Levitating Force of MEMS Combdrive,” Journal of Microelectromechanical Systems, Vol.14, No.2, pp. 305-312. (SCI)
38. Y.S. Liao, S.T. Chen and C.S. Lin, 2005, “Development of a High Precision Tabletop Versatile CNC Wire-EDM for Making Intricate Micro Parts,” Journal of Micromechanics and Microengineering, 15 (2), pp. 245-253. (SCI)
39. Y.S. Liao, S,W. Chyuan and J.T. Chen, 2004, “Numerical Studies of Variations in Gap & Finger Width Ratio and Traveled Distance for the Driving Force of RF MEMS Device Using Dual BEM,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Science, Vol. 218, pp. 1243-1253. (SCI)
40. Y.Y. Chiu, Y.S. Liao, S.C. Lee, 2004, “Slicing Strategies to Obtain Accuracy of Feature Relation in Rapidly Prototyped Parts,” International Journal of Machine Tools and Manufacture, 44, pp. 797-806. (SCI)
41. Y.S. Liao, S,W. Chyuan and J.T. Chen, 2004, “An Efficient Technique for the Arbitrarily Multilatered Electrostatic Problems with Singularity Arising from Degenerate Boundary,” Semiconductor Science and Technology, Vol. 19, pp. R47-R58. (SCI)
42. Y.S. Liao, S,W. Chyuan and J.T. Chen, 2004, “Efficacously Modeling the Exterior Electrostatic Problems with Singularity for Electron Devices,” IEEE, Circuits and Devices Magazine, September/October, pp. 25-34. (SCI)
43. S.W. Chyuan , Y.S. Liao and J.T. Chen, 2004, “Computational Study of Variations in Gap Size for the Electrostatic Levitating Force of MEM Device Using Dual BEM,” Microelectronics Journal, Vol. 35, pp. 739-748. (SCI)
44. Y.S. Liao, S.W. Chyuan and J.T. Chen, 2004, “An Alternative Efficient Method (DBEM) for Simulating the Electrostatic Field and Levitating Force of a MEMS Combdrive,” Journal of Micromechanics and Microengineering, 14, pp. 1258-1269. (SCI)
45. W.Y. Peng and Y.S. Liao, 2004, “Study of Electrochemical Discharge Machining Technology for Slicing Non-conductive Brittle Materials,” Journal of Materials Processing Technology, Vol. 149, pp.363-369. (SCI)
46. Y.S. Liao, J.T. Huang and Y.H. Chen, 2004, “A Study to Achieve a Fine Surface Finish in Wire-EDM,” Journal of Materials Processing Technology, Vol. 149, pp.165-171. (SCI)
47. Y.S. Liao and Y.P. Yu, 2004, “The Energy Aspect of Material Property in Wire-EDM and its Application,” Journal of Materials Processing Technology, Vol. 149, pp.77-82. (SCI)
48. Y.S. Liao and Y.P. Yu, 2004, “Study of Specific Discharge Energy in WEDM and its Application,” International Journal of Machine Tools and Manufacture, Vol. 44, pp. 1370-1380. (SCI)
49. Y.S. Liao, P.W. Hong and C.T. Yang, 2004, “A Study of the Characteristics of the Diamond Dresser in the CMP process,” Key Engineering Materials, Vol. 257-258, pp. 371-376. (SCI)
50. W.M. Lee and Y.S. Liao, 2003, “Self-tuning Fuzzy Control with Grey Prediction for Wire Rupture Prevention in WEDM,” International Journal of Advanced Manufacturing Technology, 22, pp. 481-490. (SCI)
51. W.Y. Peng and Y.S. Liao, 2003, “Study of Electrical Discharge Machining Technology for Slicing Silicon Ingots,” Journal of Materials Processing Technology, 140, pp.274-280. (SCI)
52. Y.S. Liao, L.C. Chiu and Y.Y. Chiu, 2003, “A New Approach of Waste Removal Process for Laminated Object Manufacturing (LOM),” Journal of Materials Processing Technology, 140, pp. 136-140. (SCI)
53. Y.S. Liao and Y.C. Chen, 2003, “Study of Wear Mechanisms in Drilling of Inconel 718 Superalloys,” Journal of Materials Processing Technology, 140, pp. 269-273. (SCI)
54. Y.Y. Chiu and Y.S. Liao, 2003, “Laser Path Planning of Burn-out Zone for LOM Process,” Rapid Prototyping Journal, Vol. 9, No. 4, pp.201-211. (SCI)
55. J.T. Huang and Y.S. Liao, 2003, “Optimization of Machining Parameters of Wire-EDM Based on Grey Relational and Statistical Analyses,” International Journal of Production research, 20, Vol. 41, No. 8, pp. 1707-1720. (SCI)
56. S.W. Chyuan, Y.S. Liao and J.T. Chen, 2003, “An Innovative and Efficient Method-DBEM for the Electrostatic Problems with Singularity Arising from Degenerate Boundary,” IEEE, Computing in Science & Engineering, pp. 52-58. (SCI)

國際會議論文 (International Conference Papers):

1. 廖運炫、楊琦婷,2008,“化學機械研磨中鑽石修整器磨耗之研究“,第七屆兩岸三地先進製造技術研討會論文集(光碟),香港、中國。
2. Y.S. Liao, S.T. Chen, P.Y. Shih, 2008 “Development of an On-Machine Micro Measuring Technique,” Proc. of the 3rd International Conference on Micromanufacturing, Pittsburgh, USA, pp. 217-221.
3. C.S. Lin, Y.S. Liao, 2008 “A Study to Improve Shape-Accuracy of the Micro Hole Drilled by EDM,” Proc. of the 3rd International Conference on Micromanufacturing, Pittsburgh, USA, pp. 167-171.
4. T.Y. Chang, Y.S. Liao, 2008 “Development of Micro Hole Measuring System based on the Capacitance Principle,” Proc. of the 3rd International Conference on Micromanufacturing, Pittsburgh, USA, pp. 128-132.
5. Y.S. Liao, M.P. Cheng, K.W. Liao, 2008, “A Real-time Ignition Delay Time Monitoring System for the Wire-EDM Process,” Proc. of the 8th Asia-Pacific Conference on Material Processing, pp. 589-594.
6. Y.S. Liao, M.P. Cheng, K.W. Liao, 2008, “An On-Line Pulse Trains Analysis System of the Wire-EDM Process,” Proc. of the 8th Asia-Pacific Conference on Material Processing, pp. 583-588.
7. Y.S. Liao, J.Y. Lin, H.C. Su, M.C. Hong, 2008, “A Study of the Distribution of Discharge Location in WEDM,” Proc. of the 8th Asia-Pacific Conference on Material Processing, pp. 571-576.
8. M.Y. Tsai, S.T. Chen, Y.S. Liao, 2008, “Dressing Characteristics of CMP Polishing Pad Using A Novel Diamond Conditioner,” Proc. of the 8th Asia-Pacific Conference on Material Processing, pp. 489-494.
9. F.H. Liu, Y.S. Liao and H.P. Wang, 2007, “Formability of the Layer Additive Ceramic Part,” Proc. of International Conference on Advanced Manufacture 2007, Nov. 26-28, Tainan, Taiwan.
10. Y.S. Liao and C.J. Tung, 2007, “Statistical Methods for the Analysis of EDM Pulse Trains, “ Proc. of Asian Electrical Machining Symposium ’07, Nagoya, Japan, pp. 213-218.
11. Y.S. Liao, H,M. Lin and J.H. Wang, 2007, “Behavior of End Milling Inconel 718 Superalloy by Cemented Carbide Tools, “ Proc. of the 10th Advances in Materials and Processing Technologies, Daejeon, Korea, pp. 996-1005.
12. S.T. Chen and Y.S. Liao, 2007, “A Novel Approach for Batch Production of Micro Holes by Micro-EDM,” Proc. of the 3rd International Conference on Multi-Material Micro Manufacture, Brovets, Bulgaria, pp. 123-126.
13. Y.S. Liao, M.Y. Tsai, J.C. Sung and Y.L. Pai, 2007, “Pad Dressing Using Oriented Single Diamond and its Effect on Polishing Rate of Oxidized Silicon Wafer,” Advances in Abrasive Technology X, Dearborn, U.S.A., pp. 427-433.
14. C.S. Lin, Y.S. Liao and S.T. Chen, 2007, “Micro Screw Pin Assembly and On-The-Machine Assembly Technologies,” Proc. of the15th International Symposium on Electromachining, Pittsburgh, USA, pp. 631-635.
15. Y.S. Liao and W.Y. Peng, 2007, “Some Investigations of Electrochemical Discharge Phenomena and its Applications,” Proc. of the15th International Symposium on Electromachining, Pittsburgh, USA, pp. 469-474.
16. Y.S. Liao, Y.T. Chang and T.J. Chuang, 2007, “An-On-Line Monitoring System for Micro Electrical Discharge Machining (Micro-EDM) Process,” Proc. of the15th International Symposium on Electromachining, Pittsburgh, USA, pp. 235-240.
17. J.T. Huang, Y.S. Liao and C.C. Su., 2007, “Study of Machining Characteristics of Small and Deep Hole in EDM Drilling,” Proc. of the15th International Symposium on Electromachining, Pittsburgh, USA, pp. 75-80.
18. Y.S. Liao, M.Y. Tsai, J.C. Sung and Y.L. Pai, 2006, “Single Diamond Dressing Characteristics of CMP Polyurethane Pad,” Advances in Abrasive Technology IX, Dalian, China, pp. 151-156.
19. C.S. Lin, Y.S. Liao and S.T. Chen, 2006, “Micro Screw Pin Assembly and On-The-Machine Assembly Technologies,” Proc. of the 1st International Conference on Microfacturing, UIUC, USA, pp. 298-301.
20. Y.S. Liao, S.T. Chen and P.Y. Shih, 2006, “Development of an On-Machine Micro Measuring Technique,” Abstracts Volume, The International Symposium on Precision Mechanical Measurements, Urumuqi, China, p.41.
21. Y.S. Liao, S.T. Chen and C.S. Lin, 2006, “A High Precision Tabletop Versatile CNC Wire-EDM for Making Intricate Micro Parts Developed in National Taiwan University,” Proc. of the 1st International Conference on Micromanufacturing, UIUC, USA, pp. 48-52.
22. Y.C. Chen, Y.S. Liao and J.D. Fan, 2005, “Autoresonant tuning and Control in Ultrasonic Vibration Assisted Drilling Process,” Proceedings of the 2005 International Conference on Advanced Manufacturing, Taipei, Taiwan, pp. 823-828.
23. Y.S. Liao and W.Y. Peng, 2005, “Study of Hole-Machining on Pyrex Wafer by Electrochemical Discharge Machining,” Proceedings of the 2005 International Conference on Advanced Manufacturing, Taipei, Taiwan, pp. 1207-1212.
24. C.S. Lin, Y.S. Liao and S.T. Chen, 2005, “Development of A Novel Micro Wire-EDM Mechanism for the Fabricating of Micro Parts,” Proceedings of the 2005 International Conference on Advanced Manufacturing, Taipei, Taiwan, pp. 235-240.
25. Y.S. Liao, S.T. Chen and C.S. Lin, 2005, “Development of a Multi-function High Precision Tabletop CNC Machine for Making Micro Parts,” Proceedings of the 3rd Int. Conf. on Leading Edge Manufacturing in 21st Century, Nagoya, Japan, pp.485-490.
26. Y.T. Chen, Y.S. Liao and T.T. Chen, 2005, “Fabrication of Arrayed Microneedles by Laser LIGA Process, “Proceedings of the 3rd Int. Conf. on Leading Edge Manufacturing in 21st Century, Nagoya, Japan, pp. 285-290.
27. C.S. Lin, Y.S. Liao and S.T. Chen, 2005, “A New Development of Micro-wire EDM for the Fabrication of Meso-scale Parts,” Proceedings of the 3rd Int. Conf. on Leading Edge Manufacturing in 21st Century, Nagoya, Japan, pp.1235-1240.
28. Y.S. Liao, Y.T. Chen, C.L. Chao and Y.M. Liu, 2005, “Surface Morphology and Sub-surface Damaged Layer of Various Glasses Machined by 193nm ArF Excimer Laser,” Micromachining and Microfabrication Process Technology X, SPIE International Symposium: MOEMS-MEMS 2005, Conference 5715-12, San Jose, USA.
29. W.Y. Peng and Y.S. Liao, 2004, “Study of Electrochemical Discharge Machining Technology for Slicing Non-conductive Brittle Materials,” Proc. of the14th International Symposium on Electromachining, Edinburgh, U.K.
30. Y.S. Liao, J.T. Huang and Y.H. Chen, 2004, “A Study to Achieve a fine Surface Finish in Wire-EDM,” Proc. of the14th International Symposium on Electromachining, Edinburgh, U.K.
31. Y.S. Liao and Y.P. Yu, 2004, “The Energy Aspect of Material Property in Wire-EDM and its Application,” Proc. of the14th International Symposium on Electromachining, Edinburgh, UK.
32. Y.S. Liao, S.T. Chen and C.S. Lin, 2003, “Development of a Horizontal and Vertical Dual-Usage High Precision Micro CNC Wire-EDM and its Application,” 7th International Conference on Mechatronics Technology, Taipei, Taiwan, pp. 433-438.
33. Y.S. Liao, P.W. Hong and C.T. Yang, 2003, “A Study of the Characteristics of the Diamond Dresser in the CMP process,” Advances in Abrasive Technology VI, Bristol UK, pp. 371-376.
34. W.Y. Peng and Y.S. Liao, 2003, “Study of Electrical Discharge Machining Technology for Slicing Silicon Ingots,” 6th Asia-Pacific Conference on Materials processing, Taipei, Taiwan, pp.274-280.
35. Y.S. Liao, L.C. Chiu and Y.Y. Chiu, 2003, “A New Approach of Waste Removal Process for Laminated Object Manufacturing (LOM),” 6th Asia-Pacific Conference on Materials processing, Taipei, Taiwan, pp.136-140.
36. Y.S. Liao, and Y.C. Chen, 2003, “Study of Wear Mechanisms in Drilling of Inconel 718 Superalloys,” 6th Asia-Pacific Conference on Materials processing, Taipei, Taiwan, pp. 269-273.

國內會議論文 (Domestic Conference Papers):

1. 廖運炫、陳順同、林常盛,2007,“精細零件加工機與高深寬比微結構製造技術之研發“,第六屆海峽兩岸製造技術研討會(光碟),寶雞、中國。
2. 廖運炫、陳順同、林常盛,2006,“精密微小CNC加工機之機上微量測技術之研發“,第五屆海峽兩岸製造技術研討會(光碟),高雄、台灣。
3. Y.S. Liao, M.Y. Tsai, J.C. Sung, and Y.L. Pai, 2006,“Pad Dressing Using Oriented Single Diamond and its Effect on Polishing Rate of Oxidized Silicon Wafer,”第五屆磨粒加工技術研討會論文集,pp. 1-7,台北。
4. 廖運炫、陳順同、林常盛,2004,“多工型高精密微小加工機之研發與微元件製造“,第四屆海峽兩岸製造技術研討會論文集,pp.315-329,杭州、中國。
5. 蔡明義、廖運炫,2003,“化學機械拋光中單顆鑽石磨粒於拋光墊上作用之探討”,第四屆磨粒加工技術研討會論文集,pp. 23-30,新竹。
6. 廖運炫、陳立春,2003,“脆性材料流道孔之雙面噴蝕及其護罩設計之研究”,第四屆磨粒加工技術研討會論文集,pp. 71-80,新竹。

專利 (Patents):

1. 廖運炫、陳盈同,微陣列探針的製作方法,中華民國發明專利第I282422號,專利期間:2007/06/11~2025/09/20。
Y.S. Liao and Y.T. Chen, Micro probe array fabrication method, ROC Invention patent, No. I282422, Eff. date: 2007/06/11~2025/09/20.
2. 楊詔中、廖運炫、陳盈同,非接觸式清潔系統及其清潔方法,中華民國發明專利第I282308號,專利期間:2007/06/11~2025/08/17。
J.J. Yang, Y.S. Liao and T.T. Chen, Non-contact cleaning system and method, ROC Invention patent, No. I282308, Eff. date: 2007/06/11~2025/08/17.
3. Y.Y. Chiu, Y.S. Liao, H.C. Li, Waste removal laminate layering rapid prototyping machine, US patent, 2006/0065355 A1, Eff. date:2004/09/30 ~2024/09/29。
4. 邱雲堯、廖運炫、王中旻、李心智,複合式模具製作方法,中華民國發明專利第I255761號,專利期間:2006/06/01~2025/01/18。
Y.Y. Chiu, Y.S. Liao, C.M. Wang and H.C. Li, Compound mold manufacturing method, ROC Invention patent, No. I255761, Eff. date: 2006/06/01~2025/01/18.
5. 廖運炫、陳順同、林常盛,線切割放電加工機構,中華民國發明專利第I254659號,專利期間:2006/05/11~2025/04/14。
Y.S. Liao, S.T. Chen and C.S. Lin, Wire-EDM mechanism, ROC Invention patent, No. I254659, Eff. date: 2006/05/11~2025/04/14.
6. 廖運炫、陳順同、林常盛,微細線張力控制機構,中華民國發明專利第I255212號,專利期間:2006/05/21~2025/04/14。
Y.S. Liao, S.T. Chen and C.S. Lin, Micro Wire-EDM tension control mechanism, ROC Invention patent, No. I255212, Eff. date: 2006/05/21~2025/04/14.
7. 廖運炫、林清章、陳順同、林常盛,複合式加工機構,中華民國發明專利第I242480號,專利期間:2005/11/01~2023/08/26。
Y.S. Liao, C.C. Lin, S.T. Chen and C.S. Lin, Compound machining mechanism, ROC Invention patent, No. I242480, Eff. date: 2005/11/01~2023/08/26.
8. 廖運炫、侯健才、邱雲堯,快速原型之架橋式層狀成形方法,中華民國發明專利第203614號,專利期間:2004/06/11~2022/01/31。
Y.S. Liao, J.T. Ho, Y.Y. Chiu, Bridge-LOM method for rapid prototyping, ROC Invention patent, No. 203614, Eff. date: 2004/06/11~2022/01/31.
9. 廖運炫、邱雲堯,選擇性撥除廢料之薄片積層快速原型製造方法及裝置,中華民國發明專利第146465號,專利期間:2001/11/21~2020/09/18。
Y.S. Liao and Y.Y. Chiu, Selective waste removal method and apparatus of LOM process, ROC Invention patent, No. 146465, Eff. date: 2001/11/21~2020/09/18.
10. 廖運炫、邱雲堯,頂面具有黏膠之薄片基層快速原型方法及其裝置,中華民國,發明專利第133559號,專利期間:2001/06/07~2020/02/02。
Y.S. Liao and Y.Y. Chiu, Method and apparatus of adhesive on the upper-surface LOM process, ROC Invention patent, No. 133559, Eff. date: 2001/06/07~2020/02/02.
11. 廖運炫、邱雲堯,薄片基層快速原型方法及其裝置,中華民國發明專利第133412號,專利期間:2001/06/07~2019/08/08。
Y.S. Liao and Y.Y. Chiu, Method and apparatus of LOM process, ROC Invention patent, No. 133412, Eff. date: 2001/06/07~2019/08/08.
12. 廖運炫、吳正仲、吳明行, 放電加工波形資料處理與監控裝置電路改良,中華民國新型專利第142782號,專利期間:1998/12/01~2009/09/09。
Y.S. Liao, J.C. Woo and M.C. Wu, Wire-EDM wave form data processing and monitoring circuit, ROC New type patent, No. 142782, Eff. date: 1998/12/01~2009/09/09.
13. 廖運炫、吳正仲、簡志誠, 放電波形鑑別與資料擷取與電路改良,中華民國新型專利第114949號,專利期間:1996/07/01~2007/12/26。
Y.S. Liao, J.C. Woo and C.C. Jian, Wire-EDM wave form discrimination and data collection circuit, ROC New type patent, No. 114949, Eff. date: 1996/07/01~2007/12/26.

得獎紀錄 (Awards):

1. 教育部九十五年度「精密機電整合人才培育計畫」技術論文獎 – 特優 (2006)
Excellent Award, Technical Paper Award on Precision Mechatronics and Integration Personnel Training Project, Ministry of Education, 2006
2. 第三屆上銀科技碩士論文獎 - 入圍獎 (2006)
Honorable Award, 2006 Hiwin Thesis Award
3. 教育部九十五年度「精密機電設計與整合」學生專題實作決賽 – 佳作 (2006)
Fine work Award, Students Hand-on Competition on Precision Mechatronics and Integration, Ministry of Education, 2006
4. 第二屆上銀科技碩士論文獎 – 銅質獎 (2005)
Bronze Award, 2005 Hiwin Thesis Award
5. The Third International Conference on Leading Edge Manufacturing in 21st Century in Nagoya (LEM21) 最佳論文獎 (2005)
Best Paper Award, The Third International Conference on Leading Edge Manufacturing in 21st Century in Nagoya (LEM21), 2005
6. 慶鴻機電股份有限公司三十週年廠慶傑出貢獻獎 (2005)
Outstanding Contribution Award, 30th Anniversary of Chin Hung Machinery & Electric Industrial Co., LTD, 2005
7. 教育部九十四年度「精密機電設計與整合」學生專題實作決賽 – 優等
Outstanding Award, Students Hand-on Competition on Precision Mechatronics and Integration, Ministry of Education, 2005
8. 教育部先進製程教學資源中心九十四年度專題製作競賽 – 第一名 (2005)
1st Place Award, Students Hand-on Competition on Advanced Precision Manufacturing Processes, Ministry of Education, 2005
9. 中國機械工程學會九十四年度博士論文獎佳作
Fine PhD Thesis Award (Advisor), CSME, 2005
10. 國科會九十三年度大專學生專題研究計畫 - 研究創作獎 (2004)
2004 NSC Creative Research Award for Undergraduate Students (Supervisor), NSC, 2004
11. 中國工程師學會九十三年度學生工程論文競賽 – 機械組第二名 (2004)
2nd Place Award, 2004 Students Engineering Paper Contest (Mechanical Engineering Group), Chinese Institute of Engineers, 2004
12. 國科會九十三年度傑出研究獎 (2004)
Outstanding Research Award, National Science Council (NSC), Taiwan, 2004
13. 教育部九十二年度「精密機電設計與整合」學生專題實作決賽 – 特優 (2003)
Excellent Award, Students Hand-on Competition on Precision Mechatronics and Integration , Ministry of Education, 2003
14. 教育部精密工具機教學資源中心九十二年度專題製作競賽 – 特優 (2003)
Excellent Award, Students Hand-on Competition on Precision Machine Tools, Ministry of Education, 2003
15. 教育部精密產業機械教學資源中心九十二年度專題製作競賽 – 特優 (2003)
Excellent Award, Students Hand-on Competition on Precision Industry Machinery, Ministry of Education, 2003
16. 機械月刊第17屆「金筆獎」佳作 (2003)
Fine paper Award in 17th Golden Pen Award, Machinery Monthly Magazine Publishing, 2003





 

TOP