首頁 > 系所成員 > 本系教授 > 張所鋐教授 返回首頁連絡我們


姓名Name 張所鋐(Shuo-Hung Chang)
職稱Title 特聘教授 Distinguished Professor
辦公室Office 工綜725室
725 Engineering Building
電話Phone 33662694
傳真Fax  
電子郵件E-mail shchang@ntu.edu.tw
個人網頁Homepage  
實驗室Lab 精微機構實驗室(Precision Micro-Mechanism Laboratory)
工綜638室, tel:23671691
自傳
Short Biography
現任(current position):

  Chair, Department of Mechanical Engineering
 機械系系主任
 Deputy Director, Center for Advanced Nano-Materials, NTU
 台大尖端奈米材料中心副主任
 Consultant, Mechanical and Systems Lab., ITRI Hsinchu, Taiwan
 工研院機械與系統研究所 兼任顧問 (台灣新竹)
 中華民國機構與機器原理學會理事長
 中華民國機械工程學會理事
 中華民國微系統暨奈米科技協會理事
 臺灣機器人產業發展協會監事

學歷(Education):

 PhD University Cincinnati, USA 美國辛辛那提大學博士
 MS University Cincinnati, USA 美國辛辛那提大學碩士
 BS National Cheng-Kung University, Taiwan 國立成功大學學士

經歷(Experience):

 Deputy General Director, Mechanical and Systems Lab., ITRI Hsinchu, Taiwan
 工研院機械與系統研究所 副所長(台灣新竹)
 Research Staff Member, T.J. Watson Research Center, IBM Corp., NY USA
 美國IBM公司華生研究中心 研究員(美國紐約)
 Director, Nano-Electro-Mechanical-System (NEWS) Center, NTU
 台大奈米機電研究中心主任
 Deputy Director, Center for Nano-Science and Technology, NTU
 台大奈米科技研究中心副主任
 Deputy Chair, Department of Mechanical Engineering, NTU
 台大機械系副系主任

研究領域
Research Interests
精密機械設計、動力學、致動器及感測器、
機械電子學、 電彈力學、微/奈米技術
Machine design, Dynamics of mechanical systems
Actuators and sensors, Mechantronics, electro-elasticity,
micro/nano technology
教學課程
Teaching Courses
機動學( Mechanism)、機器動力學( Machinery Dynamics ) 、機械設計( Machine Design )、精密機械概論( Precision Machine Desidn )、奈米工程概論( Namometechnology )
研究計劃
Research Projects

學術領域全面提升/工學院/機械工程領域提升分項計畫,主持人,計畫期間:2009/1/1∼2009/12/31,委託單位:教育部,邁向頂尖大學計畫。

 

奈米螺旋碳管合成及元件研製-總計畫:奈米螺旋碳管合成及元件研製,主持人,計畫期間:2007/8/1∼2010/7/31,委託單位:國科會。

(Synthesis of Carbon Nanocoil and Development of Carbon Nanocoil Devices, project director, period: 2007/8/1∼2010/7/31, NSC)

 

奈米螺旋碳管合成及元件研製-子計畫一:奈米螺旋碳管致動器之研製,主持人,計畫期間:2007/8/1∼2010/7/31,委託單位:國科會。

(Development of Carbon Nanocoil Actuator, project director, period: 2007/8/1∼2010/7/31, NSC)

 

奈米碳管應變感測器,主持人,計畫期間:2006/8/1∼2007/10/31,委託單位:國科會。

(Carbon Nanotube Strain Sensors, project director, period: 2006/8/1∼2007/10/31)

 

一維奈米碳管/線合成,奈米複合結構及可調式CMOS奈米管振盪器研製-總計畫:奈米複合結構及可調式CMOS,主持人,計畫期間:2004/8/1∼2007/10/31,委託單位:國科會。

(1D Carbon Nanotube and Nanowire Synthesis, Nano-Composites Fabrication and Tunable CMOS Carbon Nanotube/Nanowire Oscillator: 2004/8/1∼2007/10/31, NSC)

 

一維奈米碳管/線合成,奈米複合結構及可調式CMOS奈米管振盪器研製-子計畫二:奈米碳管機電量子性能研究,主持人,計畫期間:2004/8/1∼2007/10/31,委託單位:國科會。

(Carbon Nanotube/Nanowire Electromechanical Quantum Characterization, project director, period: 2004/8/1∼2007/10/31, NSC)

 

奈米液滴壓電致動產生器-總計畫:奈米液滴壓電致動產生器,主持人,計畫期間:2003/8/1∼2006/7/31,委託單位:國科會。

(Nano-Droplet Generator Driven by Piezoelectric Actuator, project director, period: 2003/8/1∼2006/7/31, NSC)

 

奈米液滴壓電致動產生器-子計畫二:奈米液滴壓電致動產生器-製程、組裝與測試之研究,主持人,計畫期間:2003/8/1 ∼2006/7/31,委託單位:國科會。

(Nano-Droplet Generator Driven by Piezoelectric Actuator-Subproject, project director, period: 2003/8/1∼2006/7/31, NSC)


研究著作
Publications

期刊論文 (Journal Papers):
1.J.H. Hsu and Shuo Hung Chang, 2009, “Surface Adhesion between hexagonal boron nitride nanotubes and silicon based on lateral force microscopy,” Applied Surface Science (SCI-1.576, 2008).

2.T. C. Wu and S. H. Chang, 2009, “Electro-Mechanical behavior of carbon nanotube turfs under torsion,” (SCI-2.154, 2008).

3.N. K. Chang and S. H. Chang, 2009, “Size effect of indenter on determining modulus of Nanowires using nanoindentation technique,” Thin Solid Films (SCI -1.693, 2008).

4.T. C. Wu and S. H. Chang, 2009, “Temperature enhanced growth rate for ultralong multi-walled carbon nanotube forest,” Current Applied Physics, vol. 9, pp. 1117-1121 (SCI-1.526, 2008).

5.Tzu-Chien Huang, Jing-Tang Wu, Sen-Yeu Yang , Po-Hsun Huang, Shuo-Hung Chang, 2009, “Direct fabrication of microstructures on metal roller using stepped rotating lithography and electroless nickel plating,” Microelectronic Engineering, 86, pp. 615-618 (SCI-1.583, 2008).

6.J. H. Hsu and S. H. Chang, 2009, “Tribological interaction between multi-walled carbon nanotubes and silica surface using lateral force microscopy,” Wear, vol. 266, pp. 952-959 (SCI-1.509, 2008).

7.Laurent Davoust, Yu-Lin Huang, and Shuo-Hung Chang, 2009, “Shearing of a stratified layer of amphiphilic (bio)molecules”, Surface Science, 603, pp. 2777-2788(SCI-1.731, 2008).

8.N. K. Chang, J. H. Hsu, C. C. Su and S. H. Chang, 2009, “Horizontally oriented carbon nanotubes coated with nanocrystalline carbon,” Thin Solid Films, vol.517, pp. 1917-1921 (SCI-1.884, 2008).

9.C. T. Huang, C. F. Tang, M. C. Lee and S. H. Chang, 2008, “Parametric Design of Yarn-Based Piezoresistive Sensors for Smart Textiles,” Sensors and Actuators: A. Physical, vol. 148, pp. 10-15 (SCI-1.724, 2008).

10.Laurent Davoust, Y. L. Huang and S. H. Chang, 2008, " Flow-induced melting of condensed domains within a dispersed Langmuir film,” Journal of Fluid Mechanics, vol. 20, pp. 082105(SCI-2.315, 2008).

11.T. L. Wu, J. H. Chen, and S. H. Chang, 2008, “A Six-DOF Prismatic-Spherical-Spherical Parallel Compliant Nanopositioner, ” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 55, No, 12, pp. 2544-2551 (SCI-2.160, 2008).

12.C. T. Huang, C. L. Shen, C. T. Tang and S. H. Chang, 2008, “A wearable yarn-based piezo-resistive sensor,” Sensors and Actuators: A. Physical, 141, (2), pp. 396-403 (SCI-1.724, 2008).

13.N. K. Chang and S. H. Chang, “High-yield synthesis of carbon nanocoils on stainless steel, 2008, ” Carbon, vol. 46, issue 7, pp. 1106-1109 (SCI-4.373, 2008).

14.C. S. Wei, C. C. Su and S. H. Chang, 2008, “Metallic Switching of Semiconducting Single-Walled Carbon Nanotubes with ZnO Thin Film,” Applied Physics Letters, vol. 92, pp. 213501~ (SCI-3.726, 2008).

15.N. K. Chang, C. C. Su and S. H. Chang, 2008 “Fabrication of single-walled carbon nanotube flexible strain sensors with high sensitivity,” Applied Physics Letters, vol. 92, pp. 063501~ (SCI-3.726, 2008).

16.N. K. Chang and S. H. Chang, 2008 “Determining Mechanical Properties of Carbon Microcoils Using Lateral Force Microscopy,” IEEE Transactions on Nanotechnology, vol. 7, pp. 197-201 (SCI-2.154, 2008).

17.Y. J. Yang, M. Y. Cheng, W. Y. Chang, L. C. Tsao1, S. A. Yang, W. P. Shih, F. Y. Chang, S. H. Chang, and K. C. Fan, 2007, “An Integrated Flexible Temperature and Tactile Sensing Array Using PI-copper Films,” Sensors and Actuators: A. Physical (SCI-1.724, 2008).

18.Y. W. Lee, T. L. Chang , F. H. Ko, S. H. Chang and C. C. Chen, 2007, “Experimental and Theoretical Analysis of Microjet Droplet Behavior,” Microelectronic Engineering, Vol. 84, Issues 5-8, pp. 1770-1774 (SCI-1.583, 2008).

19.Y. S. Chen, Y. L. Huang, C. H. Kuo and S. H. Chang, 2007, “Investigation of design parameters for droplet generators driven by piezoelectric actuators,” International Journal of Mechanical Sciences, V. 49, Issue 6, pp. 733-740 (SCI- 1.077, 2008).

20.Y. C. Wang and S. H. Chang, 2006, “Design and Performance of a Piezoelectric Actuated Precise Rotary Positioner,” Review of Scientific Instruments, 77, 1, pp. 10501-1~105101-5 (SCI-1.738, 2008).

21.C. S. Wei and S. H. Chang, 2006, “Partial-electroded ZnO pyroelectric sensors for responsivity improvement,” Sensors and Actuators: A. Physical, 128, pp. 18-24 (SCI-1.724, 2008).

22.L. P. Sung, P. L. Drzal, M. R. VanLandingham, T. Y.Wu, S. H. Chang, 2005, “Metrology for Characterizing Scratch Resisitance of Polymer Coatings,” Journal of Coatings Technology and Research, V2, No.8 (SCI- 1.059, 2008).

23.M. R. VanLandingham, N. K. Chang, C. C. White, P. L. Drzal, S. H. Chang, 2005, “Viscoelastic Characterization of Polymers Using Instrumented Indentation – I. Quasi-Static Testing,” J. Polym. Sci. B: Polym. Phys., Vol. 43, pp. 1794-1811 (SC-1.586, 2008).

24.C. C. White, M. R. VanLandingham, P. L. Drzal, N. K. Chang, S. H. Chang, 2005, “Viscoelastic Characterization of Polymers Using Instrumented Indentation – II. Dynamic Testing,” J. Polym. Sci. B: Polym. Phys., Vol. 43, pp. 1812-1824 (SC-1.586, 2008).

25.S. H. Chang and C. C. Chou, 2005, “A piezoelectric/elastic spring-coupled surface profiler,” Sensors and Actuators A: Physical, Vol. 120, Issue 2, pp. 317-324 (SCI-1.724,2008).

26.J. F. Lin and S. H. Chang, 2005, “Investigation and optimization of piezoelectric/elastic laminated trimorph ring transducer,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 52, no. 11, pp. 2146-2152 (SCI-2.160, 2008).

國際會議論文 (International Conference Papers):

1.Po-Yu Chi, Tsung-Cho Wu, Chi-Chung Su, and Shuo-Hung Chang, “Imprint iron-filled carbon nanotube turfs using Berkovich indenter,” The 2nd Asian Symposium on Nanoimprint Lithography, Taipei, Taiwan, Oct. 7-8, 2009

2.Marco Ceccarelli, Giuseppe Carbone and Shuo Hung Chang, “A study of feasibility of a nanosolenoid actuator made of carbon nanotube,”, Proceedings, 1st IFToMM International Symposium on Robotics and Mechatronics, Hanoi, Vietnam, September 21-23, 2009

3.Shuo Hung Chang and Jen Bon Lee, “Design of a long range nano-scale resolution mechanism,” Proceedings, 1st IFToMM International Symposium on Robotics and Mechatronics, Hanoi, Vietnam, September 21-23, 2009

4.C. C. Su, Y. L. Hsieh, N. K. Chang and S. H. Chang, “Substrate Effect on the Morphology of As-grown Carbon Nanocoils,” IEEE Nanotechnology conference, Genova, Italy, August. 25-30, 2009

5.C. C. Su, C. H. Li, N. K. Chang, T. C. Wu and S. H. Chang, “Fabrication of Carbon Nanocoils Based Tactile Sensor,” 2009 IEEE NEMS conference, ShenZhen, China, Jan. 5-9, 2009

6.Chi-Chung Su, Tsung-Cho Wu, Jung-Hui Hsu, Sung-Jin Huang and Shuo-Hung Chang, ”A UV-LED Micro-Lithography System,” 2008 Micro and Nano Engineering (MNE) conference, Athens, Greece, Sept. 15-18, 2008

7.Chi-Chung Su, Neng-Kai Chang, Ber-Ren Wang and Shuo-Hung Chang, “Two dimensional carbon nanotube based strain sensor,” 2008 Micro and Nano Engineering (MNE) conference, Athens, Greece, Sept. 15-18, 2008

8.Cheng-Hung Chena, Jia-Yush Yen, Lien-Sheng Chen and S. H. Chang, “Stiching Technology Using Hybrid Actuators in Nano-Impring,” 2008 ASME DETC conference, New York City, USA, Aug. 3-6, 2008

9.Hung-Yi Lin, Jen-Hui Tsai, Shuo-Hung Chang, Tung-Chuan Wu, Mao-Kuo Wei, “The effect of sub-wavelength structure morphology on anti-reflection properties,” 2008 ASME DETC conference, New York City, USA, Aug. 3-6, 2008

10.Tsung-Cho Wu, Neng-Kai Chang, Chi-Chung Su, Ping-Kung Huang Yao-Yang Tsai, H. Y. Lin and Shuo Hung Chang, “Surface finishing using carbon nanotube forest,” 2008 ASME DETC conference, New York, USA, Aug. 3-6, 2008

11.Yung-Chun Lee, Cheng-Yu Chiu, Shuo Hung Chang, “A New Micro/Nano-Lithography Based on Contact Transfer of Thin Film and Mask Embedded Lithography,” 2008 IEEE-NEMS conference, Sanya, China, Jan. 6-9, 2008

12.Chin-Hsin Liu, Cheng-Yu Chiu, Yung-Chun Lee and Shuo Hung Chang, ”High-frequency surface acoustic wave (SAW) devices fabricated by contact-transferred and mask-embedded lithography,” 2008 IEEE-NEMS conference, Sanya, China, Jan. 6-9, 2008

13.Yung-Chun Lee, Chun-Hsiang Chen, Cheng-Yu Chiu, Shuo Hung Chang, Fuh-Yu Chang, Hung-Yi Lin, Wen-Lang Lai; “Roller-based laser assisted direct imprinting for nanofabrication,” 2008 IEEE-NEMS conference, Sanya, China, Jan. 6-9, 2008

14.Chang, N. K., Wei, B. C. and Chang, S. H., “Growth of Carbon Nanocoils from Fe/Sn Deposited by Electron Beam Evaporation,” 2007 Taiwan-Tohoku Joint International Symposium for Mechanical Science Based on Nanotechnology, Taipei, Taiwan, Dec. 7, 2007 (oral)

15.Wu, T. L., Yang, C. H. and Chang, S. H., ”A Single-Element Bimorph PZT Driven Linear Ultrasonic Motor,” 2007 ASME IDETC/CIS Conference, Las Vegas, USA, Sept. 4-7, 2007 (oral)

16.Chang, F. Y., Lin, H. Y., Lai, W. L., Ting, C. J., Tsai, J. H., Chang, S. H. and Wu, T. C., ”Roll to Roll Processing for Nano-Photonics,” 2007 ASME IDETC/CIS Conference, Las Vegas, USA, Sept. 4-7, 2007 (oral)

17.Chang, N. K., Lin, Y. S., Chen, C. Y., Chang, S. H., “Determining Modulus of Nanowires Using Nanoindentation Technique,” 2007 IEEE Nanotechnology Conference, Hong Kong, Aug. 2-5, 2007 (oral)

18.Chang, T. L., Lin, H. Y., Lai, W. L., Chang, F. Y., Tsai, J. H., Chang, S. H. and Wu, T. C., “Study of Nanopattern Forming with Chemical Coating for Silicon Based Stamp in Nano-Imprint Process,” 2007 IEEE Nanotechnology Conference, Hong Kong, Aug. 2-5, 2007 (oral)

19.Wu, T. C. and Chang, S. H., “High Efficiency Three-Temperature Segment-CVD Synthesis of Multi-Wall Carbon Nanotube Forests,” 2007 IEEE Nanotechnology Conference, Hong Kong, Aug. 2-5, 2007 (oral)

20.Chang, T. L., Chang, F. Y., Lin, H. Y., Lai, W. L., Tsai, J. H. and Chang, S. H., ”Effects of Mold Pattern with Anti-Adhesive Treatment in Nano-Imprint lithography,” 2007 International MADATOR conference, Taipei, Taiwan, July 17-20, 2007

21.Liu, C. Y., Chang, N. K., Chang, Y, T., Hsu, J. H., and Chang, S. H., ”Preheated Carbon Source for Carbon Nanotube Synthesis,” 2007 International MADATOR conference, Taipei, Taiwan, July 17-20, 2007

22.Wu, T.L. and Chang, S. H., “Mechanism Design of Multiple Degrees of Freedom Nano-Positioners,” 12th World Congress in Mechanism and Machine Science, IFToMM conference, Besancon, France, June 17-21, 2007

23.Tsao, L. C., Cheng, M. Y., Chen, I. L., Shih, W. P., Yang, Y. J., Chang, F. Y., Fan, K. C., and Chang, S. H., “Flexible Temperature Sensor Array Using Electro-Resistive Polymer for Humanoid Artificial Skin,” 2007 Transducers conference, Lyon, France, June 11-14, 2007

24.Chen, K. W., Lin, H. Y., Chang, F. Y., Chang, Chang, S. H. and Wu, T. C., “A Study of Self Monolayer Deposition Process for the Anti-Adhesion of Nano-Imprint Stamps,” IEEE Conference on Nanotechnology, Cincinnati, OH, USA, July 17-20, 2006

25.Chang, F. Y., Lin, H. Y., Hsuch, C. H., Chang, S. H. and Wu, T. C., “Fabrication of a Periodic Nanostructure in Nano-Imprint Process,” IEEE Conference on Nanotechnology, Cincinnati, OH, USA, July 17-20, 2006

26.Chang, N. K. and Chang, S. H., “Mechanical Properties of Double Coiled Carbon Nanotubes,” IEEE Nanotechnology Conference, Cincinnati, OH, USA, July 17-20, 2006

27.Hsu, J. H. Hsu and Chang, S. H., “Mechanical Manipulation of Hexagonal Phase Boron Nitride Nanowires on the Silicon Substrate Utilizing Atomic Force Microscope,” IEEE Nanotechnology Conference, Cincinnati, OH, USA, July 16-20, 2006

28.Chang, N. K., Chuang, C. C., Su, C. C. and Chang, S. H.,“Oxidation of SWNTs Decorated with Significant Amount of a-C,”International conference on the science and application of carbon nanotube, Nagano, Japan, June 18-23, 2006

29.Chang, F. Y., Lin, H. Y., Hsueh, C. H., Tsai, C. S., Chen, K. W., Chang, S. H. and Wu, T. C., “Micro/Nano Imprint and Applications,” International Symposium on Micro and Nano Technology, Hsin Chu, Taiwan, March 29-31, 2006

30.Su, C. C., Wei, C. S. and Chang, S. H., “Electric Property Modification of Carbon Nanotube Field Effect Transistor,” International Symposium on Micro and Nano Technology, Hsin Chu, Taiwan, March 29-31, 2006

31.Chen, Y. S., Huang, Y. L., Kuo, C. H. and Chang, S. H., “Investigation on Design Parameters of Droplets Generators,” International Symposium on Micro and Nano Technology, Hsin Chu, Taiwan, March 29-31, 2006

32.Huang, J. T, Lee, C. C., Wu, C. H., Shih, S. H. and Chang, S. H., “Analysis and Design of CMOS MEMS PZT Inkjet Head,” International Symposium on Micro and Nano Technology, Hsin Chu, Taiwan, March 29-31, 2006

33.Chang, N. K., Chuang, C. C. and Chang, S. H., “Mechanical Properties of Carbon Nanofibers Forming on SWNT Templates,” International Symposium on Micro and Nano Technology, Hsin Chu, Taiwan, March 29-31, 2006

34.Hsu, J. H. and Chang, S. H., “Controlling the Dynamics of Carbon Nanotubes in Lateral Manipulation under Atomic Force Microscopy,” International Symposium on Micro and Nano Technology, Hsin Chu, Taiwan, March 29-31, 2006

35.Chang, N. K., Chuang, C. C., Su, C. C and Chang, S. H., “Amorphous Carbon Assisted Highly Percentage Synthesis of Ultralong, Well-Aligned, and Visible Carbon Nanotubes,” 2005 International Mircroprocesses and Nanotechnology Conference, Tokyo, Japan, pp. 196-197, 2005

36.Chang, S. H. and Wang, Y. C., “Design and Performance of a Piezoelectric Actuated Precise Rotary Positioner,” the 2005 IEEE ICM/HIMA, Taipei, Taiwan, July 10-12, 2005

37.Cheng, C. H., Huang, J. T., Huang, Y. L., Hsu, F. C., Wu, T. H., Li, C. C., Huang, L. S. and Chang, S.H., “Micromachined Droplet on Demand Formation with Shear Mode Piezoelectricity and Micron Sine Nozzles,” 5th IEEE Conference on Nanotechnology, Nagoya, Japan, July 11-15, 2005

38.Lin, Y. L., Chen, J. H., Huang, Y. L., Chang, S.H., Wang, C. H., and Lee, C. I., “Piezoelectric Actuating Sprayed Phase-change Cooling Technique for VLSI Chips,” ASME Summer Heat Transfer Conference, San Francisco, CA, USA, July 17-22, 2005

39.Chang, N. K. and Chang, S. H., “Manipulate Visible Ultralong Single Walled Carbon Nanotube under Optical System,” NanoTube 2005: Sixth International Conference on the Science and Application of Nanotubes, Gothenburg, Sweden, June 26-July 1, 2005

40.Hsu, J. H., Chang, S.H., Lin, B. W., Hsiao, H. L., Chen, Y. F., and Lin, T. Y., “Visualization and Mechanical Manipulation of Hexagonal Phase Boron Nitride Nanowires Using Nanomainpulator,” NT05: Sixth International Conference on the Science and Application of Nanotubes, Goteborg University, Chalmers University of Technology, and University College of Boras, Gothenburg, Sweden, June 26-July 1, 2005

國內會議論文 (Domestic Conference Papers):

1.陳逸群, 張所鋐, “不同控制器應用於主動式避振系統之強韌性,” 第十一屆全國機構與機器設計學術研討會, 明新科技大學, Nov. 14, 2008

2.游京翰, 吳宗哲, 蘇志中, 張所鋐, “以原子力顯微鏡探針量測奈米螺旋碳管之機械性質,” 中國機械工程學會第二十五屆全國學術研討會, 大葉大學, Nov. 21-22, 2008

3.李振宏, 蘇志中, 張能凱, 吳宗哲, 張所鋐, “奈米碳螺旋線圈應用於皮膚壓力感測器,” 中國機械工程學會第二十五屆全國學術研討會, 大葉大學, Nov. 21-22, 2008

4.Wei, B. C., Chang, N. K., Su, C. C., Hsu, J. H., Liu, C. Y. and Chang, S. H., “Synthesis of Carbon Nano-Coil Using Two Components catalysts,” 11th Nano Engineering and Microsystem Technology Conference, Taichung, Taiwan, Aug. 30-31, 2007

5.Kuo, C. C., Su, C. C., Chang, C. C. and Chang, S. H., “Enhance Mechanical Properties of Silica Films Deposited by Atmospheric Pressure Plasma Chemical Vapor Deposition,” Proceedings of the 24th National Conference on Mechanical Engineering The Chinese Society of Mechanical Engineers, Chung Li, Taiwan, Nov. 23-24, 2007

6.Huang, P. K., Su, C. C., Chang, N. K. and Chang, S. H., “Nano-Brushing Using Carbon Nanotube Forest,” Proceedings of the 24th National Conference on Mechanical Engineering, The Chinese Society of Mechanical Engineers, Chung Li, Taiwan, Nov. 23-24, 2007

7.Hsu, W. L., Chen, I. C., Chu, I. M., Lin, Y. C. and Chang, S. H., “Active Vibration Isolation under Variable Loading,” Proceedings of the 10th National Conference on the Design of Mechanisms and Machines, Taichung, Taiwan, Nov. 30, 2007

8.Hsu, J. H., Chang, N. K. and Chang, S. H., “Mechanical Properties of Boron Nitride Nanowires using AFM Nano-Manipulation,” Chinese Nano-Engineering and Micro-system Conference, Hsin Chu, Taiwan, Nov. 30-Dec. 1, 2006

9.Chang, N. K., Hsu, J. H. and Chang, S. H., “Use of Amorphous Carbon for Single Walled Carbon Nanotube Probe,” Chinese Nano-Engineering and Micro-system Conference, Hsin Chu, Taiwan, Nov. 30-Dec. 1, 2006

10.Chen, K. W., Lin, H. Y., Chang, F. Y., Chang, S. H. and Wu, T. C., “A Study of Self-Assembled Mono-Layer Deposition Process for Anti-Adhesion of Nano Imprint,” Chinese Nano-Engineering and Micro-system Conference, Hsin Chu, Taiwan, Nov. 30-Dec. 1, 2006

11.Chang, F. Y., Lin, H. Y., Hsueh, C. H., Tsai, C. S., Chen, K. W., Chang, S. H. and Wu, T. C., “Micro/Nano Imprint and Applications,” Chinese Nano-Engineering and Micro-system Conference, Hsin Chu, Taiwan, Nov. 30-Dec. 1, 2006

12.Chang, F. Y., Lin, H. Y., Chang, S. H. and Wu, T. C., “Fabrication of Periodic Nano-Structure in Nano Imprint,” Chinese Nano-Engineering and Micro-system Conference, Hsin Chu, Taiwan, Nov. 30-Dec. 1, 2006

13.Lin, W. C., Su, C. C., Chang, N. K., Chang, S. H., “Carbon Nano Tube Displacement Sensor,” Chinese Society of Mechanics Conference, Taiwan, Dec. 16-17, 2005

14.Yang, C. H., Wu. T. L., and Chang, S. H., “A Single PZT Bimorph Actuated Bi-Directional Ultrasonic Linear Motor,” Chinese Society of Mechanism and Machine Theory Conference, Taipei, Dec. 2, 2005

15.Chen, C. Y., Chang, N. K., Lin, Y. S. and Chang, S. H., “Dependence of Ge Modulus on Nanowire Diameter,” Chinese Society of Mechanics (CSME) Conference, Chung Li, Nov. 25-26, 2005

16.Chung, Y. C., Shih, C. K., Wei. C. S. and Chang, S. H., “Unisotropic Etching for Micro-Needle Fabrication,” Nano-Engineering and Micro-system Conference, Tainan, Nov. 10-11, 2005

17.Su, C. S., Wei. C. S., and Chang, S. H., “Electronic Modification of Carbon Nanotube Field Effect Transistor,” Nano-Engineering and Micro-system Conference, Tainan, Nov. 10-11, 2005

專利 (Patents):

1.張所鋐等3人 “與半導體製程相容之壓電噴墨頭,” 中華民國專利,專利編號 283890, 專利期間: 7/11/2007-8/2025

2.張所鋐等3人 “與半導體製程相容之奈米液滴壓電噴墨頭,” 中華民國專利,專利編號 283653, 專利期間: 7/11/2007-11/2024

3.張所鋐,李昇憲 “一種晶片步進機之構造 (A wafer stepping mechanism)”, 中華民國專利 ,專利編號186689,專利期間 9/11/2003-7/18/2018

4.張所鋐, 顏安佑, “手握式電器用品之省電開關控制結構” ,日本專利,專利編號3086194

5.張所鋐等3人, “壓電式噴墨頭之噴墨裝置及其製造方法”,中華民國專利, 專利編號 176660專利期間: 4/21/2003-8/2021

6.張所鋐等五人,“三自由度高精密線性定位平台” 中華民國專利, 專利編號: 202831,專利期間: 4/21/2003~9/11/2112

7.張所鋐,吳冬立,“並聯式六自由度奈米定位平台”中華民國專利, 專利編號:215611,專利期間: 12/1/2003~12/24/2014

8.張所鋐,李昇憲 “一種晶片步進機之構造 (A wafer stepping mechanism)”, USA專利,專利編號6,459,473,專利期間10/2002-7/2020

專書 (Books):
1.“光機電系統整合概論”, 編輯-伍秀菁、汪若文、林美吟, 國家實驗研究院儀器科技研究中心出版, July 2005

得獎紀錄 (Honors):
1.Outstanding Professor Award, Chinese Society of Mechanical Engineers (2005)



 

TOP