發表論文

　

A. REFERRED PAPER (in Journal)

Yen, J. Y., Chen, P. H., and Chen, C. L., “An Artificial Neural Network for Double Exposure PIV Image Analysis,” (accepted) Experiments in Fluids. (SCI Journal)

Chang, Z. C., and Chen, P. H., 1998, “Flow Channeling Effect on the Regenerator¢ s Thermal Performance,” Cryogenics. (accepted) (SCI Journal, Impact factor of 1994 : 0.818)

Chen, P. H., Chen, W. C. and Chang, S. H., 1997, “Visualization of Droplet Ejection Process of a Thermal Ink Jet Printhead,” J. Flow Visual. Image Proc., (Accepted)

Chen, P.H., Chen, W. C., and Chang, S.-H., 1997, “Bubble Growth and Ink Ejection Process of a Thermal-Bubble-Jet Printhead,” Int. J. Mech. Sci., Vol. 39, No. 6, pp. 683-695. (SCI Journal, Impact factor of 1994 : 0.610)

Chen, P.H., Lee, D. S., and Miao, J. M., 1997, “Effects of Rotor Type, Tongue Shape and Tongue Clearance on the Acoustic Noise of Cross-Flow Fan,” J. of Chin. I. Eng., Vol. 20, No. 3, pp. 265-273. (EI Journal)

Chen, P.-H., and Chang, Z.-C., 1997, “Evaluation of Thermal Performance of Regenerators using an Improved Single-Blow Technique Including the Effects of Non-Adiabatic Side Wall and Axial Conduction,” Int. J. Heat and Mass Transfer, Vol. 40, No. 10, pp. 2341-2349.(SCI Journal, Impact factor of 1994 : 0.894)

Chen, P.H., Lee, D.S., and Chen, S. L., 1996, “Effects of Housing on the Fan Performance and Acoustic Noise of Cross-Flow Fan,” J. CSHARE, (in Chinese) Vol. 5, No. 3, pp. 46-61.

Chen, P.H., Miao, Z.M., and Jiang, C.-S., 1996, “Novel Technique for Measuring the effect of temperature on the Diffusion Coefficient of Naphthalene in Air,” Rev. Sci. Inst., Vol. 67, No. 8, pp. 2831-2836. (SCI Journal, Impact factor of 1994 : 1.095) NSC-82-0401-D002-030

Chen, P.H. and Miao, J. M., 1996, “Effect of Upstream Wake on Shower-head Film Cooling” Int. J. Rotating Machinery, Vol. 2, pp. 269-280. NSC-82-0401-D002-030

Chen, P. H., and Chang, Z.-C., 1996, “Measurements of Thermal Performance of the Regenerator of a Cryocooler with High NTU Value,” Proc. Instn Mech. Engrs, Part C: J. of Mech. Eng. Sci., Vol. 210, pp. 341-352. (in print) (SCI Journal, Impact factor of 1994 : 0.261)

Chen, P.-H., Ai, D., and Chen, S.-L., 1996, “Investigation of the Ventilation Performance in an air-conditioned Room with Telecommunication Units,” Energy Quarterly (in Chinese), Vol. 26, No. 2, pp. 61-76.

Chen, P.-H., and Huang, K.-C., 1996, “Convective Transport Phenomena in an Impulsively Started Lid-Driven Open Cavity,” Numerical Heat Transfer, Part A: Applications, Vol. 29, No. 5, pp. 511-524. (SCI Journal, Impact factor of 1994 : 0.779) NSC-81-0401-E002-526.

Chen, P.-H., and Chang, Z.-C., 1996, “An Improved Model for the Single-Blow Measurement Including the Non-Adiabatic Side Wall Effect,” Int. Comm. Heat and Mass Transfer, Vol. 23, No. 1, pp. 55-68. (SCI Journal, Impact factor of 1994 : 0.282)

Chen, P. H., Chang, Z.-C., and B-J. Hwang, 1996, “Effect of Oversize in Wire-Screen Matrix to the Matrix-Holding Tube on the Regenerator Thermal Performance,” J. of Cryogenics, Vol. 36, No. 5, pp. 365-372. (SCI Journal, Impact factor of 1994 : 0.818)

Chen, P. H., and Miao, J.-M., 1996, “Film Cooling Effectiveness over a Shower-Head Film-Cooled Turbine Blade,” Bulletin of the College of Engineering, N. T. U, No. 66, Feb., pp. 51 - 69.

Chen, P.-H., 1996, “Effect of Depth-to-Width Ratio on the Transient Mass/Heat Transfer in a Open Cavity,” J of The Chin. Inst. for Engineers, Vol. 19, No. 2, pp. 145-154. (EI Journal) NSC-82-0401-D002-030

Chen, P. H., and Miao, J.-M., 1996, “Mass Transfer over a Film-Cooled Turbine Blade,” Int. J. of Rotating Machinery, Vol. 2, No. 4, pp. 221-236. NSC-82-0401-D002-030

Chen, P.-H., and Lee, D.-S., 1995, “Effect of Tongue Shape on the Performance Curve and the Acoustic Noise of Cross-Flow Fan,” J. of The Chin. S. Mech. Eng., Vol. 16, No. 5, pp. 445-455. (EI Journal) (1996 CSME best paper award.)

Chen, P.H., and Goldstein, R.J., 1992, “Convective Transport Phenomena on the Convex Surface of a Turbine Blade with and without the Influence of the Secondary Flows,” ASME J. of Turbomachinery, Vo1. 114, pp.776-787. (SCI Journal, Impact factor of 1994 : 0.543)

Chen, P.H. and Wung, P.H., 1989, “Diffusion Coefficient of Naphthalene in Air,” J. of The Chin. I. Chem. E., Vol. 21, No. 3, pp.161-166. (EI Journal)

Chen, P.H., and Goldstein, R.J., 1990, “Local Mass (heat) Transfer Distribution over the Concave Surface of a Turbine Blade,” J. of The Chin. S. Mech. Eng., Vol.11, No.2, pp.109-120. (EI Journal)

Chen, P.H. and Wang, W.L., 1991, “Roll Up of A Viscous Vortex Sheet,” J of The Chin. I. for Engineers, Vol. 14, pp.507-517. (EI Journal)

Goldstein, R.J. and Chen, P.H., 1987, “Film Cooling on a Turbine Blade with Injection Through Two Rows of Holes in the Near-Endwall Region,” ASME J. of Turbomachinery, Vo1. 109, pp.588-593. (SCI Journal)

Miao, Z. M., and Chen, P. H., “Effects of Mainstream Turbulence Level and Injection Hole Location on Stagnation Film Cooling,” submitted to Heat and Mass Transfer. (SCI Journal)

Ping-Hei Chen, Shing-Ya Pong, Shing-I Liu, S.-L. Chang, T.-I. Wu, and Sheng-Her Cheng, “Pressure Response and Droplet Ejection of a Piezoelectric Inkjet Printhead,” submitted to Int. J. Mech. Science. (SCI Journal)

Chang, Z. C., and Chen, P. H., “An Improved Single-Blow Method with the Effect of Radial Conduction,” submitted to Int. J. of Heat Mass Transfer.

Chen, P. H., Chen, W. C., Ding, P. P., and Chang, S. L., “Droplet Formation of a Thermal Sideshooter Inkjet Printhead,” submitted to Int. J. Heat Fluid Flow.

Chen, P. H., Ai, D., and Lee, S.-H., “Effects of Compound Angle Injection on Flat-Plate Film Cooling through a Row of Conical Holes,” submitted to ASME J. of Turbomachinery, also in ASME Turbo Expo’98.

C. 學術會議論文 (Conference papers)

艾迪，陳炳煇，李思賢，1997，“複合噴射角度對平板薄膜冷卻之影響” 第三十九屆全國航空太空工程學術研討會論文集，台南市，pp.

陳文成，陳炳煇，張所鈜，1997，“熱氣泡噴墨頭噴出墨滴串發展之過程” 第十一屆全國機械工程學術研討會論文集，熱流與能源，桃園縣，熱流，pp. 70-78.

艾迪，陳炳煇，李思賢，1997，“圓錐型孔道對平板薄膜冷卻之影響” 第五屆全國熱流會議，台北市，pp. 13-17.

劉欣怡，陳炳煇，，1997，“壓電噴墨印頭液滴形成過程之研究” 第五屆全國熱流會議，台北市，pp. 21-25.

許坤銘，洪敏勝，陳炳煇，楊正華，梁增祥，1997，“非等管徑內平板測熱傳係數之影響” 第五屆全國熱流會議，台北市，pp. 17-20.

許坤銘，洪敏勝，陳炳煇，楊正華，梁增祥，1997，“壓力梯度對管流內平板測熱傳係數之影響” 第十一屆全國機械工程學術研討會論文集，熱流與能源，桃園縣，pp. 229-235.

劉欣怡，彭新亞，陳炳煇，張所鋐，伍次寅，鄭江河，1997，“壓電噴墨印表頭墨滴成形過程之觀測” 中華民國力學學會第二十一屆學術研討會論文集(二)，台中市，pp. 71-78.

陳炳煇，1997,“燃氣輪機之基礎研究（I）—冷卻孔幾何參數對薄膜冷卻的影響,” 第五屆國科會工程處機械熱流學門研究成果研討會，桃園縣，pp. 22-25.

劉欣怡，彭新亞，陳文成，陳炳煇，張所鋐，伍次寅，鄭江河，1997，“壓電噴墨印表頭之噴墨研究，”次世代技術研討會論文集，新竹市，pp. 3-59-3-65.

陳文成，陳炳煇，張所鋐，1996，“熱噴墨印表頭墨滴成形過程之觀測” 中華民國力學學會第二十屆學術研討會論文集，台北市，pp. 274-277.

Chen, P.-H., Chen, W.-C., and Chang, S.-H., 1997, “Visualization of Droplet Ejection Process of a Thermal Bubble Ink Jet Printhead,” Flow Visualization and Image Processing 1997, edited by S. Mochizuki, Honolulu, Hawaii, Vol. 1, pp. 132-137.

Chen, P.H. and Miao, Z.M., 1996, “Effect of Upstream Wake on Convective Transport Phenomena over a Circular Cylinder with Stagnation Film Cooling” 第三十八屆全國航空太空工程學術研討會論文集，台北市，pp. 707-714.

李達生，陳炳煇，陳希立，1996，“線流扇轉子設計與舌部設計對風扇性能及噪音之影響,” 第十屆全國機械工程學術研討會論文集，台北市，流力，pp. 281 - 289.

簡清松，陳炳煇，張所鋐，1996，“熱氣泡噴墨頭熱應力分析,” 第十屆全國機械工程學術研討會論文集，固力，台北市，pp.128 - 133.

陳炳煇，1996, “Effects of Rotor Type, Tongue Shape and Tongue Clearance on the Acoustic Noise of Cross-Flow Fan,” 第四屆全國熱流會議，台南市，pp. 21.

陳炳煇，1996,“渦輪引擎葉片凸面分離過渡區之量測,” 第四屆國科會工程處機械熱流學門研究成果研討會，台北縣，pp. 99-103.

Chen, P. H., and Lee, D.-S., 1996, “Effect of the Rotor Type and Tongue Clearance on the Acoustic Noise of the Cross-Flow Fan,” 1996 Taipei HVAC & R International Conference, Taipei, pp. 201-215.

Chen, P.H. and Miao, Z.M., 1996, “Effect of Upstream Wake on Shower-head Film Cooling” The 9th International Symposium on Transport Phenomena in Thermal-Fluids Engineering, Singapore, pp. 1066-1072. 編號：NSC-82-0401-D-002 -030.

陳炳煇，艾迪，陳希立， 1995, 12, “電信交換機房之空調特性研究,” 第二屆海峽兩岸冷凍空調學術暨技術研討會論文集，台北市.

Chen, P.H. and Miao, Z.M., 1995, 12, “Film Cooling Effectiveness over a Film-Cooled Blade: An Application of the Naphthalene Technique,” The 19th National Conference on Mechanics, Taiyuan County, pp. 129-138.編號：NSC-82-0401-D-002 -030.

Chen, P.H., Chen, J.J., Miao, Z.M., Chou, S.F., and Liu, M., 1994,11,“The Effect of Upstream Conditions on the Convective Transport Phenomena over a Turbine Blade,” in Heat Transfer in Gas Turbine, HTD-Vol. 300, edited by M. K. Chyu and N. V. Nirmalan, ASME, New York, pp. 31-44.

Chen, P.H., Miao, Z.M., and Chen, J.W., 1994,11, “Convective Transport Phenomena for Film Cooling,” in Heat Transfer in Gas Turbine, HTD-Vol. 300, edited by M. K. Chyu and N. V. Nirmalan, ASME, New York, pp. 55-62.

陳炳煇，苗志銘，1995, 9, “渦輪葉片之對流傳導現象,” 第三屆全國熱流會議論文集，高雄市，pp. 291-297.編號：NSC-82-0401-D-002 -030.

Chen, P.H., Miao, Z.M., and Chan, H.C., 1994, 9, “Stagnation Film Cooling : Influence of Mainstream Turbulence on Heat (Mass) Transfer,” 第二屆全國熱流會議論文集，中壢市，pp. 55-57..編號：NSC-82-0401-D-002 -030.

Chen, P.H., Kuo, C.H., Myau, J. M., Shou, S.F., and Liu, M., 1993, 11, “The Convective Transport Phenomena over a Turbine Blade with a Multi-Row Showerhead Film Cooling,” Pacific International Conference on Aerospace Science and Technology, Tainan, Taiwan, pp. 1243-1250.

郭志暐，陳炳煇，1993,8, “多排蓮蓬頭式薄膜冷卻對渦輪引擎葉片質 (熱)傳之影響," 第一屆全國熱流會議論文集，新竹市，pp. 55-57.計畫編號：NSC-80-0210-D-002 -37

張瑞騏，陳炳煇，1992,11, “考慮管壁吸熱之單吹測試法,"第十二屆全國太陽能學術研討會論文集，台中市，pp. 63-70.

陳建維，陳進忠，陳炳煇，1992,11, “高紊流強度下對圓柱質傳的影響,” 第九屆全國機械工程學術研討會論文集，高雄市，pp. 633-642.計畫編號：NSC-80-0401-E-002 -04

陳進忠，陳建維，陳炳煇，1992,11, “尾流場及紊流強度對渦輪引擎葉片質 (熱)傳之影響,"第三十四屆全國航空及太空工程學術研討會論文集，台南市，pp. 705-714.計畫編號：NSC-80-0210-D-002 -37

陳進忠,陳炳煇,1992,11, “端牆迴流場對渦輪引擎葉片質 (熱)傳之影響,” 第一屆國防科技學術研討會論文集，桃園縣，pp. 219-226.計畫編號：NSC-80-0210-D-002 -37.

Chen, P.H., Chen, C. H., Chen, J. J., Chen, J.W. and Liu, M., 1992, 04, “Three-Dimensional Transport Phenomena of a Turbine Blade in a Flow Region Without the Influence of Endwall,” in Transport Phenomena and Dynamics of Rotating Machinery, Edited by J. H. Kim and W. -J. Yang, Hemisphere Publishing Company, New York, pp. 423-432

陳志恆,陳進忠,陳炳煇,劉明, 1991.11, “雷諾數及阻流場對渦輪引擎葉片質 (熱)傳之影響," 第八屆全國機械工程學術研討會論文集，台北市，pp. 405-412.計畫編號：NSC-78-0210-D-002 -15

王文嵐,陳炳煇, 1990.11,“瞬間啟動之正方形流場分析,” 第七屆全國機械工程學術研討會論文集,新竹市, pp.531-538.計畫編號：NSC-79-0401-E-002 -20

Chen, P.H. and Wang, W.L., 1990, 06, “Simulation of the Roll-Up of a Vortex Sheet Using a Viscous Vortex Method,” presented at the XI U.S. National Congress of Applied Mechanics.

Chen, P.H. and Wung, P.H., 1989.06, “Diffusion Coefficient of Naphthalene in Air,” Proceedings of Symposium on Transport Phenomena and Application, Taipei, June, pp.75-80. 計畫編號：NSC-78-0401-E-002 -13

陳希立,柯明村,陳炳煇, 1988,12,“表面波對薄膜冷凝熱傳之影響,"中華民國第十二屆全國力學會議論文集，台北市, Dec., pp.181-190.

Chen, P.H. and Goldstein, R.J., 1988, "Convective Transport Phenomena over a Turbine Blade," in Transport Phenomena in Thermal Control., edited by G.-J. Hwang, Hemisphere Publishing Coop., New York, pp. 267-294. (related to Ph. D. Thesis)

D. 學術專書 (教科書除外)

E. 評論論文與書本章節 ( Review articles and book chapters)

Goldstein, R. J., Chen, P. H., and Chiang, H. D., 1996, Measurement of Temperature and Heat Transfer, Handbook of Heat Transfer Measurement, 2nd Ed. Edited by Rohsenow, W. R., Hartnett, J. P., and Cho, Y. I., McGraw-Hill, New York.

F. 學位論文 (Degree papers)

Chen, P.H., 1988, “Measurement of Local Mass Transfer from a Gas Turbine Blade,” Ph. D. Dissertation, U. of Minnesota, Minneapolis, USA

Chen, P. H., 1984, “Film Cooling of a Turbine Blade by Injection Through Two Rows of Staggered Holes in Near-End-Wall Region,” Master Thesis, U. of Minnesota, Minneapolis, USA

G. 其他 (含Technical reports)

陳炳煇，1997，“新型浴缸水龍頭壓力平衡器之開發與測試設備之建立機之開發”慶齡工業中心報告.

陳炳煇，1997，“儲冰（冷）式分離型冷氣機之開發(一)-- 儲冰（冷）式分離型冷氣機送風研究(II)”國科會報告，編號：NSC-86-2212-E-002 -064.

陳炳煇，1997，“燃氣輪機之基礎研究（II）—冷卻孔幾何參數對薄膜冷卻的影響”國科會報告，編號：NSC-86-2212-E-002 -080.

張所鋐，陳炳煇，1996，“熱氣泡噴墨頭熱應力分析,” 工研院光電所報告

陳炳煇，1996，“儲冰（冷）式分離型冷氣機之開發(一)-- 儲冰（冷）式分離型冷氣機送風研究(I)”國科會報告，編號：NSC-85-2221-E-002 -042.

陳炳煇，1996，“燃氣輪機之基礎研究（I）—冷卻孔幾何參數對薄膜冷卻的影響”國科會報告，編號：NSC-85-2212-E-002 -047.

陳炳煇，1996，“渦輪引擎葉片凸面分離流過渡區之量測”國科會報告，編號：NSC-84-0401-E-002 -021.

陳炳煇，周賢福，1995，“渦輪葉片之對流傳導現象(三)”國科會報告，編號：NSC-82-0401-D-002 -030.

陳希立，陳炳煇，1995，“室內機送風機風道性能改良”聲寶股份有限公司委託研究期末報告

鄭建炎，李石頓，周賢福，陳希立，陳瑤明，楊宏智，陳炳煇，1995, “立即熱質升級吸收式空調系統之研究(三)”，經濟部工業局報告，經濟部科技研究發展專案計畫期末報告

陳炳煇，1994，“橫流風扇性能改良”宗卓章基金會，編號：83-S-11.

鄭建炎，李石頓，周賢福，陳希立，陳瑤明，楊宏智，陳炳煇，1994, “立即熱質升級吸收式空調系統之研究(二)”，經濟部工業局報告，經濟部科技研究發展專案計畫期末報告

黃秉鈞，陳炳煇，1994，“脈衝冷凍機應用研究(四)”能委會報告，編號：832-Z6.

陳希立，陳炳煇，1994，“電信交換機房的空調特性分析”交通部電信研究所研究期末報告

陳炳煇，1993，“瞬間啟動之矩形凹槽的流場與質(熱)傳現象”國科會報告，編號：NSC-81-0410-E-002 -526.

鄭建炎，李石頓，周賢福，陳希立，陳瑤明，楊宏智，陳炳煇，1993, “立即熱質升級吸收式空調系統之研究(一)”，經濟部工業局報告

黃秉鈞，陳炳煇，1993，“脈衝冷凍機應用研究(三)”能委會報告，編號：822-Z6.

黃秉鈞，陳炳煇，蘇金佳，1992，“脈衝冷凍機應用研究(二)”能委會報告，編號：812-Z6.

陳炳煇，周賢福，1992，“渦輪葉片之對流傳導現象(二)”國科會報告，編號：NSC-80-0201-D-002 -37.

陳炳煇，1992，“在高紊流流場內之蓮蓬頭式薄膜冷卻”國科會報告，編號：NSC-80-0401-E-002 -04.

黃秉鈞，陳炳煇，蘇金佳，1991，“脈衝冷凍機應用研究(一)”能委會報告，編號：802-Z6.

陳炳煇，1990，“飛機引擎葉片之蓮蓬頭式薄膜冷卻”國科會報告，編號：NSC-79-0401-E-002 -20.

陳炳煇，周賢福，1990，“渦輪葉片之對流傳導現象(一)”國科會報告，編號：NSC-78-0201-D-002 -15.

陳炳煇，1989，“溫度對奈及對二氯苯在空氣中之擴散係數的影響”國科會報告，編號：NSC-78-0410-E-002 -13.